Plazma kesici

Hypertherm powermax 105

A near-new plasma cutter is available. Operating hours: 30h. Open-circuit voltage (U₀): approx. 292V. Output current (I): 105A at 30A/92V-105A/122V (at 92 or 122V, below 30A). Output voltage under load (nominal) HYP U₂/ IEC U₂: ~160V (at 100% power)/ ~142-160V depending on standard. Duty cycle at 30°C, at 80% power 105A (at X 40°C), 100% at 94A or other voltages. Power supply/input: three-phase (3-PH), various voltages possible 380-400V etc., U1 50/60 Hz. Protection rating: IP23CS. Standards: EN60974-1, EN60974-10 Class A, GOST, etc. Power consumption (P1): 14.9kW/h (~14.9kW). Duty cycle at 40°C: 80% at 105A (at certain voltages), 100% at slightly lower currents (e.g. ~94A) at higher voltages, other combinations depending on voltage/standard. Length with handles: 592mm, width: 274mm, height: 508mm. Weight with torch (7.6m cable): 45kg. Table with sheet metal fastener, collecting tray, and rail guide for the plasma cutter optionally available. On-site inspection possible.
Crodpfjxddaajx Aatei

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.