Well-maintained die-cutting machine with triple-action breaker, 730 x 1030 mm, raised by 300 mm

iijima mfg. Japan JF-1030

Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools.
Machine number 8061
Year of manufacture: 1991
Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips.
More modern LEUZE photoelectric sensors in the front and side guides.
LEUZE ultrasonic detection with teach-in function.
Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages.
Chains replaced in May 2023.
Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm.
Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear.
Oil seals replaced.
Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation.
Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date.
For the end user: can be delivered including installation, transport and warranty.
Other specifications according to the factory brochure.

Technical Specifications – Flatbed Die-Cutting Machine

Materials
• Paper from 80 g/m²
• Solid fibre board / cardboard up to 2000 g/m²
• Corrugated board up to 4 mm, depending on material quality and cutting layout

---

Sheet Sizes & Formats
• Maximum sheet size: 750 × 1050 mm
• Minimum sheet size: 350 × 400 mm
• Maximum cutting form size: 745 × 1070 mm
• Maximum cutting surface: 730 × 1030 mm
Bljdpsx Ndu Dofx Al Iep
• Inside chase dimension: 750 × 1050 mm

---

Performance
• Maximum cutting pressure: when running max. sheet size 300 metric tons
• Maximum speed: up to 8,500 sheets/hour
• Gripper margin: adjustable 8 - 12 mm
• Normal cutting rule height: 23.80 mm

---

Pile Data

Feeder pile
• Height (incl. pallet): 1,500 mm
• Weight (incl. pallet): 1,000 kg

Delivery pile
• Height (incl. pallet): 1,380 mm
• Weight (incl. pallet): 1,000 kg

Auxiliary piles
• Feeder auxiliary pile height: 450 mm
• Feeder auxiliary pile weight: 450 kg
• Delivery auxiliary pile height: 800 mm
• Delivery auxiliary pile weight: 800 kg

---

Machine Dimensions & Weight
• Length without feeder: 4,540 mm
• Length with feeder: 5,810 mm
• Width: 2,350 mm
• Height: 2,100 mm
• Weight of machine: 15,000 kg
• Weight of feeder: 1,000 kg

---

Electrical & Air Requirements
• Power supply: 3-phase AC
• Main motor output: 15 kW
• Connected load of machine: 32.4 kVA
• Compressed air required: 6 bar
• Air intake volume requirement: approx. 30–50 l/min

---

Additional Information
• Heavy-duty industrial construction
• Designed for continuous professional die-cutting production
• Specifications subject to alteration

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.