Çalışma platformlu yarı römork

KÖGEL 3-Achs-Mega Chassis

Durumu: yeni, toplam ağırlık: 39.000 kg, azami yük ağırlığı: 32.480 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment list. Full equipment details available on request. Frame * Standard steel lightweight ladder frame with through-cross beams * Coupling plate approx. 8 mm thick, with a double-pin kingpin according to DIN 74080 / ISO 337 Chassis * Axle lift mechanism on axle * Fully automatic, load-dependent axle lift control * Starting aid: activation via 3x brake pedal actuation, 30% overload at speeds up to 25 km/h * BPW three-axle ECO Air suspension unit, with disc brakes Ø approx. 430 mm, offset approx. 120 mm * Air suspension with approx. 180 mm stroke Tyres * Wheels with built-in sensors according to UN ECE R141 * Tyres: six 385/65 R 22.5 UNIROYAL TH 50 * 6 steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120) Chassis Attachments * Landing legs (manufacturer of your choice, as per Kögel), mechanical with compensating foot, lifting capacity approx. 24 t, single-sided operation on right side in direction of travel * Spray suppression system in accordance with Regulation (EU) No. 109/2011 for three-axle assemblies with 385/65 R22.5 tyres, consisting of: 1 pair quarter-round mudguards in front of axles, 1 pair straight mudguards with spray flaps between 1st and 2nd axle, and 1 pair quarter-round mudguards with spray flaps behind the axles * Side guard according to ECE-R73 * 2 waterproof plastic toolboxes, internal dimensions approx. 545 x 400 x 400 mm * Rear access ladder, right side, extendable * High rigid rear underrun protection in steel according to ECE-R58 * 1 pair of extendable warning signs for overwidth loads, retro-reflective red/white, with LED lighting, spiral cable and plug connection. Located at the front and rear of the vehicle Brake / Air Suspension System * Wabco EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (without interconnecting lines), parking brake as spring-actuated brake, external pneumatic connections and external EBS diagnostic port via ISO 7638 plug connection * Air suspension system incl. 1 lift/lower valve, mounted on left side behind axle unit. Driving position adjusts automatically * 2 coded coupling heads at front, ISO 1728 * Air tanks for brake system and air supply made of steel (EN 286-2) Hfjdpfow E A Emsx Ac Hsn Floor * Floorboards approx. 30 mm thick, sealed all-round * Stake pockets for square insert stakes approx. 80 x 80 mm, layout as per drawing J9: 8 stake pocket rails (18 pockets per rail: 4 outside + 10 in the center per rail) Front wall * Storage for up to 14 square posts approx. 80 x 80 mm (length approx. 1,990 mm) on inside front wall * Front wall approx. 2,000 mm high with steel corner posts, with profiled steel sheet, bolted/riveted to frame * 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on bulkhead according to EN 12640 Side wall * VarioFix steel lashing outside frame * 24 pairs of lashing loops in the outer frame (according to EN 12640), permissible pull force approx. 5,000 kg per ring Bumper Protection * 1 pair of steel bump stops approx. 160 x 85 x 85 mm mounted on external rear frame plate * Transverse galvanized steel angle as forklift protection, including lock cam protection in the centre, mounted on the rear frame plate Electrics / Electronics * Light carrier made of steel, located above the underrun guard * KÖGEL LUXIMA Premium Package * 2 multi-chamber...