Yatay şerit testere

Kaltenbach KBS 750 DG

Kaltenbach KBS750 DG Bandsaw Line with T14 Transport System

Kaltenbach KBS 750 Double Mitre Horizontal Bandsaw with LS270 NC Length Stop and T14 Transport System in steel trade configuration – operation and programming via control panel.

This Kaltenbach KBS 750 DG horizontal bandsaw is a very fast and powerful bandsaw perfectly suited for cutting structural steel profiles such as horizontal H-beams, angle steel, channel steel, flat stock, and rectangular tubes.

Semi-automatic twin-column bandsaw for cutting 16 m long profiles with double mitre – pivoting device.

Technical Specifications

Cutting capacity at 90°: 750 mm × 500 mm
+70°: 730 × 500 mm
–70°: 710 × 500 mm
+60°: 670 × 500 mm
–60°: 650 × 500 mm
+45°: 550 × 500 mm
–45°: 520 × 500 mm
+40°: 500 × 500 mm
+30°: 390 × 500 mm
Minimum profile cross-section: 10 × 10 mm
Bandsaw blade dimensions: 6990 × 41 × 1.3 mm, type bimetal M42, Z3/4
Drive power: saw with frequency control: 5.5 kW
Hydraulic unit (4.9 l/min): 1.5 kW
Cutting speed: 15–100 m/min, infinitely adjustable from the control panel
Feed rate: working feed: 0–300 mm/min
Rapid forwards and return: 2500 mm/min
Working height: 640 mm
Compressed air connection: 6–8 bar
Air consumption: 500 NL/min (as per DIN 1342)
Saw weight: approx. 3200 kg
Saw dimensions: 3230 × 1160 × 2420 mm
Electrics: compliant with EN 60204-1
Power supply: 3 phase + N + PE / 50 Hz
Power consumption: 17 kVA
Protection: 35 A

Machine Features Kaltenbach KBS 750 DG

- Very robust twin-column guide for maximum precision
- Angled saw bow for higher performance and accuracy
- Automatic table lowering during material transport
- Infinitely variable speed control by frequency inverter
- Hydraulic saw feed, manually adjustable
- NC-controlled angle adjustment with absolute encoder
- Automatic cycle: clamping – sawing – unclamping
- Horizontal clamping device: fixed front stop, opposing clamping jaw via cylinder
Gbodpfxoy Rimus Ahkel
- Manually adjustable pressure reduction
- Vertical clamping device: directly beside the blade; pressure manually adjustable
- Play-free linear guides
- Automatic adjustment of the blade guides
- Automatic cutting pressure regulation
- Remote diagnosis possible (customer-side phone line required)
- Hydraulic blade tensioning with electronic monitoring
- Automatic release during standstill
- Automatic stop in case of blade breakage
- Micro-spraying system for clean operation and long service life
- Integrated chip container
- Separately driven chip brush
- Electronic slip monitoring
- Hydraulic heater

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.