Dikey matkap makinesi

Kaltenbach KDV

Vertical drilling machine with material feed gripper system for material positioning. WITHOUT control system and therefore not operational. Control cabinet available, but partially incomplete. Operating manual and wiring diagrams are available.

WORKING RANGE
Round bar material: 20 mm – 150 mm
Square material: 20 mm – 140 mm
Flat material (width): 20 mm – 240 mm
Flat material (height): 5 mm – 140 mm

DRILLING UNIT
Vertical from above
Min. drill diameter: 6 mm
Max. drill diameter: 25 mm
Tools: HSS drill bits only
Spindle speeds: 380 rpm – 1,600 rpm
Rapid advance/return: max. 11,000 mm/min
Drilling feed: 10 – 1,500 mm/min
Drill carriage positioning: max. 17,000 mm/min

DRIVE POWER
Frequency controlled (87 Hz curve): 2.6 kW

MANUAL TOOL CHANGE
Quick-change tool holder: MK3

WORKPIECE CLAMPING
Guodpfx Ajy At Iysg Hoa
Horizontal: max. 5.6 kN

MATERIAL FEED GRIPPER
Stroke length: 670 mm
Feed rate: 6 – 60 m/min
Return speed: 60 m/min

AIR CONSUMPTION
Approx. 300 l/min

MACHINE DIMENSIONS
(L x W x H) approx.: 1,610 x 1,120 x 2,400 mm

WORKING HEIGHT
Above floor level: 1,040 mm

WEIGHT
Machine without accessories approx.: 1,600 kg

COMPRESSED AIR CONNECTION
Provided by customer (for air cooling system): 6 – 8 bar

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.