Plaka makasları - mekanik

KAPEMA SMP 20-30

Sheet width: 2050 mm
Sheet thickness: 3 mm
Strokes per minute: up to 35
Cutting angle: 2.0°
Table height above floor: 870 mm
Sheet thickness for stainless steel: 2 mm
Total power requirement: 4 kW
Machine weight approx.: 1550 kg
Dimensions (L x W x H): 2.5 x 1.57 x 1.21 m

The new SMP motorized guillotine shear is a well-dimensioned machine with a fully welded ram guide system. The drive is via a standard gear brake motor connected to the main shaft by chain. The blades are of the highest quality. The optimal cutting angle, combined with the sheet hold-down, ensures perfect cuts. All bearings and guides are maintenance- and lubrication-free.

Standard equipment:
• Back gauge 665 mm with millimeter scale.
• Cutting line illumination.
• Stroke counter.
• Table extensions 600 mm.
• Right-angle fence, left side.
• Mobile 24 V foot switch with emergency stop.
• Motor protection switch and emergency stop.
• 2 cutting edges per blade.
• Rear safety guard.

Warranty: 12 months for single-shift operation. This covers only replacement parts – defective parts must be returned. Labor costs for replacement and machine downtime are not covered. The bending capacity refers to a material strength of 380 N/mm².

Nodpfx Absvdfmxsxsli
Other models: 1275 x 3 mm, 1250 x 4 mm, 2050 x 2 mm
STOCKING DEALER WITH OWN 1600 m² WAREHOUSE.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.