Zıvana delme makinesi

Koch Sprint PTP3-L

Used Koch Drilling and Dowel Insertion Machine Sprint-PTP-3

Machine Technical Data
Workpiece Dimensions:
Length Y: 110–800 mm
Width X: 20–1200 mm
Thickness Z: 14–60 mm

Material: Chipboard/MDF/Softwood
Machine equipped with 2 working zones. Two workpieces with a maximum width of 600 mm each can be loaded independently.
Working height: 900 mm

- Equipped with horizontal drilling station
- Equipped with glue application and dowel insertion station
- Includes 1 vibratory bowl feeder
- Vertical drilling distance Z above support table: 35 mm
- 1 positioning fence each on left and right side
- Mechanical digital displays for height adjustment
- Cycle start via hand button

Koch Numeric with 1 NC axis (X)
Cgjdpfezbunkox Ammew
Positioning control with PC (Windows XP Professional PC)

Including extended machine frame for max workpiece width of 1200 mm
2 additional workpiece clamping cylinders
Central stop for 4 working zones (removable for wide workpieces)

Horizontal drilling station with 1 drill spindle:
Max. drilling depth: 28 mm
Drill chuck Ø10 mm
Total drill length: 70 mm
Drill speed: 7200 rpm
With dowel hole air blast

Glue application and dowel insertion station
Dowel Ø: 8 mm
Dowel length: 30 mm
Dowel protrusion: 7–14 mm (currently set to 11 mm)
Tolerance for wooden dowels:
- Dowel length: +/- 1 mm
- Dowel diameter: +0.1/-0.2 mm

With electronic glue monitoring ELC
A monitoring device is installed before the glue valve which measures glue flow each cycle. If no glue is dispensed from a valve, the machine interrupts the cycle and displays the corresponding glue valve in the control cabinet.

Electrical data:
Connected load: 400V, 50 Hz, 3-phase
Voltage fluctuations max. +6% to -10%

Pneumatic connection:
1 x R 1/2" internal thread
7 bar

Extraction air speed: approx. 30 m/sec

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.