Soyma santrifüjü ilaç ve kimyasallar

KRETTEK ProCeNT P 63 B

Durumu: yeni, Üretim yılı: 2025, Fonksiyonellik: tamamen fonksiyonel, giriş voltajı: 400 V, giriş akımı türü: trifaze, basınç: 70 bar, toplam yükseklik: 1.600 mm, toplam genişlik: 800 mm, toplam uzunluk: 1.200 mm, sıcaklık: 40 °C, çalışma basıncı: 70 bar, gürültü seviyesi: 80 dB, Donanım: devir hızı sonsuz değişken, dokümantasyon / kılavuz, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Drinking Water Compact, fully automated reverse osmosis system for producing hygienic drinking and process water from natural seawater. Ideal for maritime applications, island water supply, hotels, and small industrial or utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with disc-tube (DT) technology Permeate Output: approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (guideline value) Recovery Rate: approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: approx. 25 °C (operating range approx. −2 to 35 °C) Process Technology & Construction DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Typically, no chemical feed water pre-treatment (no acid dosing) required Integrated rinsing and CIP function, PLC-controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure piping in stainless steel, low-pressure section in seawater-resistant plastic Pump components in contact with seawater made from corrosion-resistant materials Operating & Power Data Feed Water Flow: approx. 1,000 L/h (reference value) Operating Pressure RO Module: High-pressure range, designed for seawater desalination Power Supply: 230 V, 50 Hz, 1~ Connected Load: approx. 6 kW Control, Monitoring & Safety Local control panel with integrated PLC Monitoring of pressures, flows, conductivity, and operating hours Fsdsw Uf Ihspfx Admjft Automatic shutdown in case of: - Low inlet pressure - Exceeding maximum allowable operating pressure - Overpressure in permeate/concentrate line - Exceeding defined conductivity limits (with automatic diversion to drain) Automatic “Stop & Rinse” function: Rinses seawater-carrying components with permeate upon shutdown to reduce fouling during standby periods Dimensions & Weight (Skid) L × W × H: approx. 1,190 × 705 × 1,500 mm Weight: approx. 530 kg (dry), approx. 605 kg (in operation) Typical Applications - Ships, offshore platforms, ports - Island and coastal water supply - Hotels, resorts, small industrial or utility operations - Backup or peak-load unit for existing drinking water production Further technical documentation, photos, and information about scope of delivery, pricing, and availability are available upon request.

Üretim yılı: 2002, Durumu: işlem için hazır (kullanılmış), Maks. Hız: 1900 rpm-1 Dolgu malzemesinin izin verilen sıcaklığı: 80 °C Fedpfxspy D S Ne Admsft İzin verilen dolgu malzemesi yoğunluğu: 1250 kg/m3 Uygulama: gıda endüstrisinin yanı sıra temel ve ince kimyasalların üretimi

Durumu: mükemmel (kullanılmış), Üretim yılı: 2011, TOP TOWER 2000 asfalt plentası şunları içermektedir: Ermont kurutma tamburu + CBS brülör + filtre ve filtre altı bunker + mikseri. Yıl: 2011. Kapasite: 200 ton/saat. Kumanda kabini eksiktir. Fsdpexpm Ttjfx Admsft

Üretim yılı: 1981, Durumu: işlem için hazır (kullanılmış), İki özdeş santrifüj mevcuttur, tambur çapı: 1050mm, maksimum hız: 550/dak, maksimum kapasite: 230kg, üretim yılı makine 1/2: 1978/ 1981. Ffodpfx Adshynphjmot

Üretim yılı: 2016, Durumu: işlem için hazır (kullanılmış), Isıtma gücü: 1100 kW, ortam: termal yağ, yağ tipi: Maroltherm LH, maks. akış sıcaklığı: 300°C, izin verilen çalışma sıcaklığı: 300°C, izin verilen çalışma basıncı: 10 bar, hacimsel akış: 51 m³/h, maks. baca gazı sıcaklığı: 400°C, akış izleme (diferansiyel basınç): 0,1 bar-0,36 bar, soğuk başlatma hacimsel akış: 0,1 bar, dolum kapasitesi: 1500 l. Dokümantasyon mevcuttur. Yerinde inceleme mümkündür. Ffedpewtg Hdofx Admjt

Durumu: kullanılmış, Depo ölçüleri: 520 cm yükseklik ve 360 cm çap, ücretsiz yükleme, nakliye organizasyonu imkanı. Ffedpfx Adoxpnldomjt

Durumu: kullanılmış, New: Yes Usable Material: Bitumen Unladen Weight: 16,000 kg Fully automatic bitumen emulsion system 1. COLLOID MILL (10 m³/hour) 1 2. FOAM TANK (5 m³) 1 Ffedpjx D A Rkofx Admjt 3. BITUMEN FEED PUMP 1 4. FOAM GENERATION SYSTEM 1 5. PIPEWORK AND FITTINGS 1 6. CONTROL PANEL 1 7. CHASSIS 1 FOAM TANK (1 unit) - Frame - Box section profile - Capacity: 5 m³ - The tank body is made from 3 mm AISI 304 stainless steel plate - All welds are performed using appropriate stainless steel TIG welding b) Heating - 2-inch stainless steel pipe - Oil inlet and outlet pipes are 1 inch, DN50, PN16, DIN 2633 - Pressure test is performed at 6 bar c) Mixing system - 3 kW, 60 rpm agitator motor - Drive is by chain and sprocket - Sealing is achieved with packings - Bearings are SKF or FAG - Fixed baffles on the outer walls are installed to improve dispersion and ensure a homogeneous structure d) Temperature indicators are both digital and analogue, with two outputs provided - The bitumen pump capacity is max. 8 m³/h - Fitted with a 7.5 kW, 400 rpm gear motor - The bitumen meter is designed for a capacity of 10 m³/h a) Pipes - Manufactured from steel pipes in accordance with DIN 171175 (DN200, DN150, DN100, DN80, DN65, DN25) - The mill line consists of 1.5-inch inner pipe and 2-inch outer jacket pipe - Jacket pipes are welded to TSE standards - Bypass pipes are made at suitable locations in 0.5-inch diameter b) Expansion joints - DN 50, DN 80, PN 16, rated for 200°C c) 3-way and 2-way valves with heating - Compliant with TSE standards - Designed for operation under high pressure (16 bar) and temperature (230°C) d) Hot oil valves - Hot oil valves by KLINGER or THERMO, heat-resistant - DN25 PN16, DN65 PN16, DN50 PN16 e) Filter - Features an inner container made with 3 mm wire, designed for easy and frequent cleaning - - The panel is assembled in accordance with IC standard