Freze makinesi

Kunzmann WF4/3 TNC320 wenig Betriebsstunden

Durumu: mükemmel (kullanılmış), Üretim yılı: 2010, Fonksiyonellik: tamamen fonksiyonel, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contouring Control, in Excellent Condition, CE-compliant, from a Training Workshop! Technical Data: >> Year of manufacture: 2010 Machine No.: 347283 >> Fixed angle table >> Speed: stepless up to 4,500 rpm >> Feed stepless in 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axis 5,000 mm/min, Z axis 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg Chodsxuppujpfx Ad Nod >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill – SK40 >> Hydraulic drawbar system >> Weight approx. 1,800 kg >> Required space approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Equipment: >> Heidenhain TNC 320 contouring control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control operating manual, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 contouring control. This universal milling machine is in excellent condition, has only seen little use, and comes from an environment where it was only used for training purposes. The control system is very user-friendly. The machine is equipped with hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal operation is very simple due to the swing-away vertical head. The guides are continuously lubricated by central lubrication. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Kunzmann machine under power on site. There are 7 units of Kunzmann WF4/3 milling machines with TNC 320 Heidenhain controls available. The machines are immediately available.

Durumu: mükemmel (kullanılmış), Üretim yılı: 2010, Fonksiyonellik: tamamen fonksiyonel, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 Path Control, Very Good CONDITION, CE Compliant, from Training Workshop! Technical Specifications: - Year of manufacture: 2010, Machine No.: 347284 - Fixed angle table - Infinitely variable spindle speed up to 4500 rpm - Infinitely variable feed on 3 axes from 0 to 2000 mm/min - Rapid traverse X and Y axes: 5000 mm/min Z axis: 4000 mm/min - Travel X/Y/Z: 400/350/400 mm Codpfx Aexupdlod Nehd - Table size: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill - SK40 - Hydraulic clamping system - Weight approx. 1800 kg - Space requirement approx.: 2.3 x 2 x 2 m - Drive power: 15 KVA Equipment and Accessories: - Heidenhain TNC 320 path control - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operator's manual for the control system, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 path control system. This universal milling machine is in very good condition and has very low operating hours. It comes from a facility where it was used exclusively for training purposes. The control unit is very easy to operate. The machine features hydraulic clamping for both vertical and horizontal machining. Switching from vertical to horizontal operation is very straightforward thanks to the fold-away vertical head. The guides are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to see and test the Kunzmann under power at our location. There are 7 Kunzmann WF4/3 milling machines with TNC 320 Heidenhain control available. The machines are available immediately.

Durumu: mükemmel (kullanılmış), Üretim yılı: 2010, Fonksiyonellik: tamamen fonksiyonel, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contouring Control – Excellent Condition, CE-Compliant from a Training Workshop! Technical Data: - Year of manufacture: 2010, Machine no. 347247 - Fixed angle table - Spindle speed: infinitely variable up to 4,500 rpm - Feed rate, infinitely variable in 3 axes from 0 to 2,000 mm/min - Rapid traverse X and Y axis: 5,000 mm/min - Z axis rapid traverse: 4,000 mm/min - Travel (X/Y/Z): 400/350/400 mm - Table size: 650 x 350 mm - Table load capacity: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Approx. weight: 1,800 kg - Approx. required space: 2.3 x 2 x 2 m - Drive power: 15 KVA Accessories and Features: - Heidenhain TNC 320 contouring control - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control operating manual, and programming samples - Handwheels - Coolant system - Electronic handwheel HR410 About the Machine: Offered for sale is a Kunzmann WF4/3 universal milling machine with Heidenhain TNC 320 contouring control. This universal milling machine is in excellent condition with very few operating hours, having been used solely for training purposes. The control unit is very user-friendly. The machine is equipped with hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal milling is very easy thanks to the swiveling vertical head. The guideways are regularly lubricated by the automatic central lubrication system. The Kunzmann has undergone mechanical and electrical inspection in our facility. Take the opportunity to inspect and test the Kunzmann under power on-site. Chjdexupc Uspfx Ad Njd We have 7 Kunzmann WF4/3 milling machines with Heidenhain TNC 320 in stock. The machines are available immediately.