Tanker yarı römork

LAG 20 FT ADR Chassis & 35m³ SWAP L4BH / MIETE

Container Chassis 20FT:

Fifth wheel height: 1180 mm (unladen, air-suspended tractor unit)
Suitable for the transport of containers:
- 1 x 20FT ISO
- 1 x 20FT (7150) Swap body
- 1 x 20FT (7450) Swap body
- 1 x 20FT (7820) Swap body

Three-axle unit SAF INTRA DISC PLUS SBS2220, with disc brakes (large discs 430 mm).
INTRA air suspension with steel suspension brackets.
The axles are air-suspended, with axle 1 as a lift axle, controlled automatically via EBS.
6 aluminium rims, size 22.5 x 11.75, brand TIA, polished finish, ET 120 mm.
WABCO EBS-E braking system, type 2S/2M (ABS on 1 axle), with RSS system (roll stability) and pneumatic hand parking brake on 2 axles, compliant with regulations.
Tyre pressure monitoring system WABCO OptiTire (TPMS).
Hnsdpeyqiy Tjfx Apysn
Landing gears JOST MODUL B, version with plates and compensating feet (S), load capacity 2x12,000 kg, mechanically operated.
1 PVC toolbox (1,040x490x480 mm), mounted on the right.
Stainless steel drip tray with removable aluminium cover plate.
On both sides of the drip tray, left and right, a working platform covered with aluminium safety grating.
Left and right, behind the 20FT connection above the third axle, an aluminium walkway.
Between the longitudinal beams: 2 PE hose pipes, @ 160 mm, length 6,200 mm, with PE end caps at the front.
At the rear, the hose pipes are equipped with separate, lockable stainless steel caps (dia. 160 mm).
Rear: 1 foldable ADR sign.
Vehicle specification according to ADR: EX/II + EX/III + FL + AT

Container:
Type: CIMC Longitudinal Swap Body Tank (CLS)
Capacity: 35,000 liters
Tare weight: 4,130 kg
Operating pressure (max.): 3.0 bar
Test pressure: 4.5 bar
Temperature range: –40°C to +130°C
Approvals: IMO Type 4, RID/ADR-L4BH, UIC, TIR, CSC
Shell: 1.4402 (316L), 3.2 mm, 2B finish
Ends: 1.4402 (316L), 4.2 mm, hot rolled, polished
Baffle plates: 4× vertical, CVC-shaped, corrugated, welded to 70%
Internal finish: degreased, pickled, passivated, neutralized
Ladder: stainless steel, rear right, anti-theft
Walkway: aluminium, non-slip, 475 mm, with cross steps
Handrail: foldable, telescopic, anti-theft
Stacking: up to triple stack
Manhole: Ø500 mm, 316 stainless steel, 8-bolt, EPDM/PTFE
Inspection openings: 3× Ø300 mm, 316 stainless steel, 4-bolt
Safety valve: 3", stainless steel, 3.75 bar, without flame arrester, with rupture disc & gauge
Air line: 1.5", with ball, safety & non-return valves, gauge operable from below
Vacuum valve: 2" BSP, –0.21 bar
Bottom valve: 3", with cable remote closure
Steam heating: 8 longitudinal runs, 1" BSP, 3 bar
Thermometer: analogue, –40°C to +160°C
Insulation:
- 50 mm mineral wool (tank & ends)
- PU foam under stainless steel straps
Cladding:
- Shell: 4× 1.8 mm GRP panels
Marking: 3× holders for Edgar Weber flip boards, 1× Kemmler holder

Interim sale and errors expressly reserved!

Sale exclusively according to our terms and conditions.

Important note – Important information: Despite thorough verification of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the platform providers. Therefore, we point out that all information is supplied without guarantee and does not constitute a legal claim.

Legal Notice: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information to initiate a contract. The information provided here is supplied without guarantee and does not represent warranted characteristics

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.