çubuk taşlama makinesi

Loewer HBS 400

Durum: yeni, Number of sanding units: 1 Profile width: 390 mm Maximum profile height: 390 mm LÖWER Timber Sanding Machine HBS 400 ub Single-sided belt sanding machine with underside sanding for beams, glulam beams, and other bar-shaped wooden workpieces. Includes reversible operation for sanding in both directions (forward and backward), enabling significant time savings when sanding three or four sides of a workpiece. Constant working height allows the use of roller conveyors in front of and behind the machine Maximum working width: 390 mm Workpiece thickness: 10 to 390 mm Sanding belt: 420 x 1800 mm Pneumatically controlled sanding belt oscillation Special sanding belt drive motor, three-phase, 7.5 kW, with automatic star-delta start and countercurrent brake Special sanding shoe system enables surface sanding while adapting to workpiece tolerances by means of adjustable air pressure; time-controlled sanding shoe application at the leading workpiece edge, adjustable via timer Workpiece feed via high-grip conveyor belt driven by rubber-coated feed rollers; plunge control via contactless sensor and pneumatic cylinder (independent of workpiece thickness) Feed speed approx. 10 m/min Feed unit guided in robust linear bearing Emergency stop function for intervention in the workpiece infeed, sanding belt tear, door opening, or pneumatic pressure drop Extraction ports with 2 x 150 mm connection diameter Dimensions (L x W x H): 1400 x 1300 x 2000 mm Weight: 950 kg Voltage: 400 V, 50 Hz, 3-phase, air pressure 6 bar CE conform Special accessories: Nsdpfx Aeytx Ufsn Helh ----- Heavy-duty roller conveyor, HBS, 500 mm wide, 2 m long Ball-bearing-supported carrying rollers, diameter 60 mm, steel tube galvanized with 12 mm spring axle, load capacity per roller 80 kg, roller spacing 250 mm, roller width 500 mm, height-adjustable support legs per meter, conveyor height 850 mm +/- 60 mm Roller cover according to HBG (required for machines with automatic feed) Price: On request LÖWER Service – commissioning, training (without electrical and extraction connection): flat rate Net, without deduction Price: On request (Technical data per manufacturer specification – subject to change without notice!)

Üretim yılı: 2011, durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min - Feed belt speed: 10 m/min - Belt dimensions: 420x1800 mm (contact us for supply) MACHINE CONFIGURATION: - Roller table, belt operates from below Table height from floor: 90 cm - Automatic workpiece detection via sensor - Pneumatic pressure sanding pad - Automatic belt rotation direction reversal Njdpex A Unxofx An Helh MACHINE SPECIFICATIONS: - Main power supply: 400 V, three-phase, 50 Hz IN 22 A (35A fuse required) - Automatic star-delta starter - Ammeter(s) for monitoring power consumption Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic tensioning, oscillation, and retraction of the rollers - Pneumatic supply: 6 to 8 bar - Extraction: 2 lower outlets, Ø150 mm Recommended airflow: 2200 m³/h Speed: 20 m/sec - CE marking, Emergency stops front/rear, Lockable main disconnect switch Note: For your satisfaction, please ensure that belts are loosened when the machine is not in use, and all moisture is avoided, including dew point within your premises during winter. Footprint: 1500x1300x2050 h.mm Weight: 1200 kg