Briketleme presi

mütek Systemtechnik MPP 60

Our best-selling briquetting press – the classic.
+ Proven, straightforward technology for extremely low failure rates
+ 25 years of experience, continuous development, and expertise
+ Several thousand machines in operation with satisfied customers
+ Excellent price-performance ratio

Options at extra charge:
* Surcharge for level sensor enabling automatic operation + €995 net
* Surcharge for large pre-compactor chamber + €970 (recommended for very light material such as straw; the machine becomes 13 cm wider)

Briquette diameter: 50 mm
Front bushing: 50 mm
Maximum briquette stroke: 40 mm
Optimal briquette stroke: 40 mm
Throughput (depending on material): up to 60 kg/h*
*depending on bulk density
*based on a bulk density of 200 kg per cubic meter

Motor power: 5.5 kW
400 Volt / 50 Hz / 3-phase
Length: 1,680 mm
Width: 1,100 mm
Height: 1,500 mm
Weight: 680 kg
Oil tank capacity: 110 liters
Cjdpfx Apjgl Nlms Asha
Silo diameter: 1,000 mm
Silo volume: approx. 0.7 m³
Pump: 37 liters
Hydraulic pre-compactor
Press jaw cooling option: no
Hydraulic oil cooling option: yes
Level monitoring option: yes
CE compliant

Requirements for raw material:
- The (atro) moisture content must be at least 6% and no more than 18%
- Chip length max. 15 mm
- Installation temperature: heated area with minimum +5°C
- Customer is responsible for preventing hydraulic oil loss
- Feed material must be free from metals and mineral impurities such as sand, stones, etc. Damage to the press tools and/or increased wear can result otherwise.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.