Briketleme presi

mütek Systemtechnik MPP NEM 900

* Options available at extra cost, see below
* Approximate manufacturing time: +/- 6 months

The MPP NEM series hydraulic briquetting presses compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The compaction process is performed without the addition of binders, relying solely on hydraulic press pressure. Depending on the material, the volume of the input material can be reduced by up to 90%.

The standard silo has a capacity of approximately 0.5 m³. Silos with larger capacities or special containers for installation beneath existing extraction and filter systems, forming a complete disposal unit, are also available. Depending on customer requirements, individual MPP NEM machines can be combined into a system. The press's chip container can be loaded manually, via conveyor belt, dust extractor, or tipping container trolley. For fully automated operation, the use of a lifting/tipping device in combination with a shredder is recommended. The MPP NEM series briquetting presses are designed for producing briquettes from homogeneous material.

The briquette length varies by model from 40 to 80 mm, while the diameter depends on the type: 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length are filled into the press’s feed hopper. A stirrer installed at the bottom of the hopper prevents bridging and transports the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slide until the set press pressure is reached. The vertical cylinder then retracts, and the stable briquette is ejected.

The more homogeneous the feed material, the more uniform the length of the briquettes produced.

Briquetting offers the following advantages:
• Volume reduction of up to 90%
• Emulsion recovery
Gusdpfx Agsgfm Ryj Hja
• Cost savings in storage and transport
• Economical disposal
• Profitable resale

Briquetting Press NEM 900:

For briquetting aluminum chips
Throughput rate: up to a maximum of 350 kg/h (depending on material; chip length less than 10 mm)
During the last test with aluminum chips less than 18 mm – approx. 260 kg/h

*Further details upon request after a free test with your material.

Briquette diameter: Ø 70 mm
Optimal briquette length: 70 mm

Technical data:
Total connected load: approx. 31 kW
Continuous operation: approx. 22 kW
400 Volt / 50 Hz / 3-phase
Pump: 120 + 60 liters per minute
Silo: 1 m³
Silo diameter: 1200 mm
Includes stirrer
Oil tank: 600 liters
Dimensions: 2500 x 1700 x 1730 mm (L x W x H)
Weight: 2250 kg
Hydraulic precompaction via slide
Main press cylinder
Vertical cylinder
Prepared for connection to a cooling unit

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.