Plastikler için parçalama tesisi

mütek 630 K

Specialized machine for the shredding of plastics

Base machine from €24,990 net
Bcedpfjd H R Sxjx Agfsw

Ideally suited for shredding:
- Paper, cardboard, pipes, profiles, boxes, canisters, buckets, cans, pallet wood offcuts, etc.
- Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET

Included features:
- Special rotor with embedded knives (reduced load absorption)
- Narrow cutting gap between rotor and counter knives

Motor: 18.5 kW; 400 V – 50 Hz – 3 phase
Control: PLC

Feed opening (top): 600 x 800 mm
Parts should be max. approx. 500x500 mm in size
*Height is less relevant

Hydraulically actuated pusher,
Screen perforation as required (25–40 mm)
For plastics, coarser screens (30–40 mm) are recommended
*For finer granulation, a two-stage size reduction system with a downstream MVZ granulator (screens 5–15 mm) is recommended

Extraction port diameter: 160 mm
Weight: approx. 1,300 kg
Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm

Additional options available at extra cost:
- Shredder raised by approx. 25 cm (preparation for conveyor discharge) + €1,980 net
- Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net
- Overbelt magnet + €5,980 net
- Controls for conveyor and overbelt magnet + €2,750 net (synchronized start/stop with shredder)
- Alternatively, manual start/stop control for conveyor + €595 net

Material requirements:
- Moisture content (atro) must be below 25%
- Metals and mineral contaminants such as sand, stones, etc. will cause increased wear.

We are happy to offer a free test using your material. You are welcome to visit us in Neckartailfingen for this purpose, or you can send your material via freight service and we will document the test with photos and videos.

---
*Only suitable for brittle plastics of medium hardness,
*Not suitable for elastic or extremely hard and heavy plastics, as this would impact the durability of the system.
---

Optional: next larger machines available

Base machine: Shredder MGZ 830 K-S – 18.5 kW

Feed opening (top): 800 x 1,000 mm
Parts should be max. approx. 720x700 mm in size
*Height is less relevant

from €39,995 net * options priced separately

Base machine: Shredder MGZ 1030 K-S – 22 kW

Feed opening (top): 1,000 x 1,000 mm
Parts should be max. approx. 900x700 mm in size
*Height is less relevant

from €49,975 net * options priced separately

Base machine: Shredder MGZ 1330 K-S – 37 kW

Feed opening (top): 1,300 x 1,200 mm
Parts should be max. approx. 1,200x700 mm in size
*Height is less relevant

from €79,975 net * options priced separately

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.