Beverage van

ET 35*Rollladenaufbau *1,2 to NL*B-Führerschein

* ORTEN CityRollup body
* All-aluminum body with segmented roll-up doors
* 2 compartments at 2,057 mm + 2 compartments at 1,320 mm
* DEKRA certified according to VDI 2700 ff and DIN EN 12642 XL
* Range approx. 200 km
* Battery: Lithium Iron Phosphate
* Battery capacity: 80 kWh, 400 V
* Leaf spring suspension

ORTEN Electric Trucks E 35 with roll-up door body:

Pricing takes subsidies into account.

Technical data chassis:
Manufacturer: ORTEN
Vehicle class: N2
GVW: 4,250 kg (driver's license class B)
Unladen weight: 2,295 kg
Wheelbase: 3,745 mm
Blsdsqz R Dmjpfx Al Iop
Tires: 185/75 R 16C

Equipment:
Seats: 1+2
* Rear axle ratio i = 4.1
* Rear axle stabilizer
* Disc brakes front
* Drum brakes rear
* Driver airbag
* Fog lights
* Heat-insulating glass
* Driver's seat, "Luxury" version
* Central locking
* Electrically adjustable exterior mirrors
* Storage compartments in the front doors, left and right
* Multimedia 2DIN with USB port
* Hands-free system
* ABS
* Summer tires
* Spare wheel, supplied loose
* Wheel chocks with holder (vehicle class N2)
* Cab color similar to signal white RAL 9003
* Chassis color: graphite black
* Rim color: silver
* Warning triangle
* First-aid kit
* Hazard warning lights
* Operating manual

Technical data of the conversion:
* Maximum speed: 85 km/h
* Range: approx. 200 km
* Battery: Lithium Iron Phosphate (LFP), nickel and cobalt-free
* Battery capacity: 80 kWh, 400 V / DC
* Charging connector: Type 2 Mode 3 / AC / IEC 62196
* Charging time: approx. 3.5 hours at 400 volts / 22 kW AC
* Electric motor: Synchronous electric motor, water-cooled
* Motor power: 70 kW / peak 92 kW
* Torque: 410 Nm / peak 730 Nm

Technical equipment:
* Regenerative braking power
* 22 kW on-board charger AC
* DC/DC on-board power converter
* Electric power steering assistance
* BMS-CAN-BUS-controlled charging technology
* Electric 5 kW HV cab heater
* Color display, showing all relevant battery, BMS, motor and control data
* Diagnostic menu for motor control and BMS integrated in the information display
* Diagnostic menu for battery cell monitoring integrated in the information display
* Structural elements in stainless steel
* Battery heating system HV 400 volts / DC (only in charging mode)
* Vehicle acceptance test according to § 13 EG-FGV / ECE R100

ORTEN City Rollup body

Body dimensions:
Overall length: approx. 3,600 mm, floor slope: 0 mm
Overall height: approx. 2,360 mm, compartment width: front 2057 / rear 1320 mm
Overall width: approx. 2,200 mm, compartment height: 1575 mm

Aluminum roll-up doors:
Roll-up with spring assistance. Rubber band for pulling down the roll-up doors. In the closed position, the doors are centrally secured by a locking handle, which is mounted on each side of the front panel and can be locked with a padlock.

Pallet stop:
Pallet stop approx. 20 mm on the outer edge of each compartment, welded to prevent goods from sliding against the door.

Underrun protection:
Original chassis underrun protection is used.

Rear wall:
Fixed rear wall. Double-walled, clad with aluminum with a smooth surface.

Painting:
Exterior of the body painted in RAL color. Lettering can be done according to specifications for an additional charge.

Side steps:
The side underrun protection consists of running boards with a non-slip surface for the driver. Steps along the body on both sides of the vehicle, between the axles and behind the rear axle.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.