Kullanılmış 3E-Grabtrade Stokta Tam Parçalama Hatti satın al (13.663)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Wülfrath
2.582 km
Mobil parçalama tesisi
DoppstadtInventhor Type 6
Çağrı
Koşul: ikinci el, Üretim yılı: 2022, çalışma saatleri: 3.250 h, Fonksiyonellik: tamamen fonksiyonel, Base package Inventhor 6:
Load-sensing system
Fuel tank: 500 liters
Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm
Centrally arranged wear strips
24-V electrical control – with additional electric pump for operating the following functions when the engine is off: rear conveyor raise/lower/fold, comb flap open/close, comb open/close, folding hopper raise/lower
Complete radio remote control
Large side maintenance doors made of fiberglass-reinforced plastic
Maintenance-friendly engine compartment
LED lighting package: engine compartment and rear
Hydraulically reversible fan
Three-sided loading protection
Folding hopper
Fire extinguisher
Maintenance ladder
Toolbox
Acoustic start-up warning
Doppstadt telematics system
Paint finish: RAL2011 deep orange
Optional equipment:
Dkodpfxjxx N T Ij Ahron
Drive train 310 kW - electric drive
Tri-axle drawbar chassis unit
Shredding system Size L-C3 600/4-30Z
Size L limiter
Additional hydraulic connection 35 – 80 l/min
Hydrostatic drive
Hopper extension 350 mm, left-hand watering
Rear conveyor 7 m
Overband magnet, neodymium
Frame for 7 m overband magnet
Centralized lubrication
Special paint finish in RAL
Delivery date to be agreed upon
Küçük ilan
Wülfrath
2.582 km
Mobil parçalama tesisi
DoppstadtInventhor 6
Çağrı
Koşul: iyi (kullanılmış), Üretim yılı: 2022, çalışma saatleri: 2.806 h, Fonksiyonellik: tamamen fonksiyonel, Equipment:
Basic package Inventhor Type 6
Dksdpownfwqofx Ahrjn
Load-sensing system
Fuel tank 500 liters
Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm
Centrally arranged lubrication strips
24V electric control – additional electric pump for operating the following functions when the engine is off: “Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper”
Complete radio remote control
Large side fiberglass (GRP) maintenance doors
Maintenance-friendly engine compartment
LED lighting package: engine compartment and rear
Hydraulically reversible fan
Three-sided loading protection
Folding hopper
Fire extinguisher
Maintenance ladder
Toolbox
Acoustic start-up warning
Doppstadt telematics system
Painting: RAL2011 deep orange
Special equipment:
310 kW - EV powertrain
3-axle drawbar running gear unit
Size L 600/4 - 30 Z shredding system
Additional hydraulic connections 35 – 80 l/min
Hydrostatic drive
Rear conveyor 4.9 m
Overbelt magnet neodymium
Frame for overbelt magnet
Küçük ilan
Wülfrath
2.582 km
Mobil parçalama tesisi
DoppstadtInventhor Type 6
Çağrı
Koşul: ikinci el, Üretim yılı: 2022, çalışma saatleri: 1.518 h, Fonksiyonellik: tamamen fonksiyonel, Basic Package Inventhor 6:
- Load-sensing system
- 500-liter fuel tank
- Longitudinal conveyor: length 2,900 mm, width 800 mm
- Centrally arranged wear strips
- 24V electric control system – additional electric pump to operate the following functions when the engine is off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper
- Complete radio remote control
- Large side GRP service doors
- Service-friendly engine compartment
- LED lighting package: engine compartment and rear
- Hydraulically reversible fan wheel
- Three-sided load protection
Dsdpfxjxx N Dge Ahrskn
- Folding hopper
- Fire extinguisher
- Maintenance ladder
- Toolbox
- Acoustic start-up warning
- Doppstadt telematics system
- Painting: RAL2011 deep orange
Optional Equipment:
- 260 kW - EV drivetrain
- 2-axle semi-trailer chassis unit
- Size L shredding system – 20 teeth
- Size L limiter
- Additional hydraulic connections 35 – 80 l/min
- Hydraulic drive system
- Hopper extension 350 mm, watering on both sides
- Size L hopper wedge with NM brush
- Rear conveyor 7 m
- Overbelt neodymium magnet
- Frame for 7 m overbelt magnet
Delivery date subject to prior agreement

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Bitburg
2.566 km
Ağaç parçalama makinesi – arızalı
WeimaWL 4
Çağrı
Koşul: kusurlu yedek parçası bulunmakta (kullanılmış), Üretim yılı: 2003, Arızalı Weima Parçalayıcı WL 4 - 18,5 KW
Üretim yılı: 6/2003
Motor gücü: 18,5 KW
Kontrol panosu
Makine, parçalayıcıda şanzıman arızası olduğu için çok uygun fiyata satılmaktadır.
Konum: stoktan 54634 Bitburg
- hemen mevcut -
Dkjdpfx Aezbyuvohron
Küçük ilan
Koło
1.951 km
Tam kereste fabrikası (sabıt)
Wood-MizerEG300
Çağrı
Koşul: yeni, Üretim yılı: 2025, EG300EH25S-EMR
Ana motor gücü: 18,5 kW
5 dairesel testere bıçağı (4 sabit, 1 hareketli)
Setworks – otomatik kesim parametreleri ayar cihazı
İki adet lazer seti
5 dairesel testere bıçağı takımı
Ayarlanabilir ilerleme hızı 0-25 m/dak
Dkodpeyynq Refx Ahron
4 tahrikli rulo
Besleme/çıkarma masası
Rulolu konveyörler
Testere bıçak çapı: 350 mm
Minimum tahta uzunluğu: 700 mm
Maksimum tahta kalınlığı: 60 mm
Minimum tahta kalınlığı: 16 mm
Maksimum tahta genişliği: 550 mm
Maksimum kesim genişliği: 420 mm
Minimum kesim genişliği: 20 mm
Talaş kutusu
Küçük ilan
Brno
1.867 km
Tam Kaplamalı Fiber Lazer Kesim Makinesi
BodorBodor C3
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2026, kontrol tipi: CNC kontrolü, otomasyon derecesi: yarı otomatik, tahrik tipi: elektrikli, Model: C3 Çalışma Alanı: 3048mm*1524mm Lazer Çıkış Gücü: 40kW/30kW/22kW/20kW/12kW/6kW/3kW/2kW/1.5kW Konumlandırma doğruluğu: ±0.05mm Yeniden konumlandırma doğruluğu: ±0.03mm Maks. bağlantı hızı: 110m/dak Maks. hızlanma: 1.5G 1.Aktif Çarpışma Önleme Fonksiyonu Lazer kafalarının hasar oranını etkili bir şekilde azaltın, bakım maliyetinden tasarruf etmenize yardımcı olun. 2.Tek Tıkla İşleme Sistemin tüm işlevleri, tam otomatik seri üretim elde etmek için mantıklı ve düzenli bir şekilde dağıtılır. 3.İnce Sac Keserken Titreme Yok C Serisi, ince sacların kenarlarını kesebilir ve hiçbir titreme izi bırakmaz. 4.Germe Alüminyum Kiriş Sertliği %60 artar Ağırlık %20 azalır Ekipman çalışma hızı %50 artar 5.Zıvana ve zıvana Bağlantılı Kaynaklı Yatak Daha iyi sonuç elde etmek için yatağın her çerçevesi zıvana ve zıvana bağlantısından sonra kaynaklanır istikrar ve sıkılık.
Dksdpfx Ahog Iwyporen
Küçük ilan
Vilnius
1.903 km
Tam korumalı lazer kesim makinesi
BodorC Series
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2026, kontrol tipi: CNC kontrolü, otomasyon derecesi: yarı otomatik, tahrik tipi: elektrikli, kontrolör üreticisi: Bodor, lazer tipi: fiber lazer, lazer kaynak üreticisi: Bodor, Tam korumalı taban sac fiber lazer metal kesme makinesi Maksimum kesme alanı, çeşitli kesme seçeneklerine uygun 12000 mm * 2500 mm'ye kadar ulaşır. Özel fiber lazer nozulu ve kesme işlemi, daha hızlı karbon çeliği oksijenle kesme, daha fazla gaz tasarrufu sağlayan düşük basınçlı paslanmaz çelik azotla kesme ve daha kaliteli karbon çeliği havayla kesme sağlar. Gaz akışını az türbülansla sabit tutarak kesme performansı ve verimliliği artırılır. Fiber lazer kafaları, hasar oranını etkili bir şekilde azaltmak ve bir lazer kesicinin bakım maliyetinden tasarruf etmek için çıkıntı yapan engelleri algılayabilir. Kesme işlemi, ince sacların kenarlarında bile çalışır ve hiçbir tırtık izi bırakmaz. Tek Tıkla İşleme ile bir lazer kesici, tek seferlik bir kurulumla toplu olarak birden fazla sayfayı işleyebilir ve toplu işleme elde edebilir. Durum: Yeni Lazer Tipi: Fiber Lazer Lazer Gücü: 1000W - 40000W Kesme Alanı: 3048*1524mm - 12500*2600mm Kesme Hızı: 0-110m/dak Konumlandırma doğruluğu: ±0.05mm Yeniden konumlandırma doğruluğu: ±0.03mm Desteklenen Grafik Formatı: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC veya Değil: Evet Soğutma Modu: SU SOĞUTMA
Dksdpohwhfmjfx Ahrjn
Küçük ilan
Hamburg
2.520 km
Tam konteyner erişimli istifleyici
CVS FerrariF500RS6 S
Çağrı
Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2018, çalışma saatleri: 13.530 h, yük kapasitesi: 46.000 kg, kaldırma yüksekliği: 16.200 mm, yakıt türü: dizel, inşaat yüksekliği: 4.900 mm, güç: 257 kW (349,42 bg), boş ağırlık: 83.700 kg, toplam uzunluk: 12.000 mm, çekiş tipi: Diesel, inşaat genişliği: 4.185 mm, Dolu konteyner istifleyici
Yük merkezi: 1780
Şanzıman: Dana TE32FF
Dksdpfxjzaxkgo Ahrjn
Durum: Kullanıma hazır ve tamamen işlevsel
Teknik durum: çok iyi
Ön lastik tipi: Pnömatik
Ön lastik ebadı: 18.00-33
Arka lastikler Tip: Hava
Arka lastikler Boyut: 18.00-33
TR: kapasite artışı için hidrolik destek krikoları hidrolik kayar kabin şasi, bom + serpici için merkezi yağlama sistemi arka görüş kamerası klima (otomatik iklim kontrolü) otomatik serpici ayarı 20'-40' TR: daha geniş erişim ile daha yüksek yük kapasitesi için hidrolik destek 2x şasi, bom ve serpici için merkezi yağlama elektronik klima ile hidrolik kayar kabin otomatik serpici ayarı 20-40 arka görüş kamerası
Küçük ilan
Hamburg
2.520 km
Tam konteyner erişimli istifleyici
HysterRS46-41XD/67S
Çağrı
Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2021, çalışma saatleri: 20.134 h, yük kapasitesi: 46.000 kg, kaldırma yüksekliği: 15.355 mm, yakıt türü: dizel, güç: 240 kW (326,31 bg), toplam uzunluk: 9.250 mm, çekiş tipi: Diesel, inşaat genişliği: 4.204 mm, Tam konteyner reachstacker
Yük ağırlık merkezi: 1865
Şanzıman: Dana TE30
Durum: Kullanıma hazır ve tam fonksiyonel
Teknik Durum: Çok iyi
Ön lastik ölçüsü: 18.00-33
Ön lastik durumu: %80 - %100
Djdpfxszaxkao Ahrskn
Arka lastik ölçüsü: 18.00-33
Arka lastik durumu: %80 - %100
TR: 3. sırada taşıma kapasitesini 21 tondan 30 tona çıkarmak için hidrolik destek ayakları, merkezi yağlama sistemi.
Küçük ilan
Sečovlje
1.916 km
MALZEME (YUVARLAK ÇAP) - TAM DEMİR
BOHLER-MATELRAVNESTEEL - ROUND
Çağrı
Üretim yılı: 2025, Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Farklı çap ve kalitelerde malzeme satıyorum:
- Malzeme D2 (W.Nr. 1.2379), FI = 29 mm, 1089 kg
- Malzeme D2 (W.Nr. 1.2379), FI = 33 mm, 1050,18 kg
- Malzeme D2 (W.Nr. 1.2379), FI = 65 mm, 52,10 kg
Dksdpey Ufarsfx Ahrjn
- Malzeme OCR8W SIHARD S471 – BOHLER K360, FI = 26 mm, 595,92 kg
- Malzeme OCR8W SIHARD S471 – BOHLER K360, FI = 33 mm, 1428,56 kg
- Malzeme OCR8W SIHARD S471 – BOHLER K360, FI = 40 mm, 2219,50 kg
Küçük ilan
Mertendorf
2.263 km
Ağaç parçalama makinesi / Parçalayıcı
RÖSSLERMHR630 proline
Çağrı
Koşul: yeni, Üretim yılı: 2026, çalışma saatleri: 4 h, Fonksiyonellik: tamamen fonksiyonel, güç: 18,5 kW (25,15 bg), toplam ağırlık: 1.250 kg, toplam uzunluk: 1.750 mm, toplam genişlik: 1.200 mm, toplam yükseklik: 1.640 mm, çalışma genişliği: 630 mm, giriş voltajı: 400 V, kumanda kabini yüksekliği: 200 mm, kontrol paneli uzunluğu: 600 mm, kontrol kabini genişliği: 600 mm, bıçak sayısı: 30, dönüş hızı (maks.): 100 dev/dak, rotor çapı: 260 mm, rotor genişliği: 630 mm, elek delme: 15 mm, giriş akımı türü: Klima, garanti süresi: 12 aylar, Donanım: dokümantasyon / kılavuz, Geri dönüşüm malzemesi parçalama makinesi Odun parçalama makinesi Yonga makinesi Shredder MHR630 proline
MHR proline serisi, ticari ortamda güvenilir sürekli kullanım için geliştirilmiş, sağlam ve enerji tasarruflu ahşap parçalama makineleridir. Bağlantıya hazır bu shreddler; yüksek performansı, düşük enerji tüketimi ve güçlü fiyat-performans oranı ile öne çıkar. Böylece, bu yonga makineleri, ekonomik ve aynı zamanda yüksek performanslı bir çözüm arayan zanaatkâr atölyeleri, geri dönüşüm firmaları ve endüstriyel işletmeler için idealdir.
Avantajlar
- Sürekli ve eşit parçalama süreci
- Düşük enerji tüketiminde yüksek performans
- Artırılmış kapasite için 2 bıçak sırası
- Sağlam yapı
- Daha büyük besleme açıklığı
- Güçlü fiyat-performans oranı
Dkjdpfxozbz H Hs Ahron
- Bağlantıya hazır
- Siemens PLC kontrollü
- MHR630 proline
Rößler geri dönüşüm malzemesi parçalama makinesi "Made in Germany"
Tıklama
Weißenburg in Bayern
2.229 km
Portafiltresli tam otomatik espresso makinesi
WMF035500
Üretim yılı: 2018, Koşul: ikinci el, 1 adet Espresso portafiltreli tam otomatik WMF 035500. İki entegre değirmen, otomatik presleme, hava soğutmalı çekirdek hazneleri, 380-415 Volt, 6.0 - 7.0 kW, 50/60 Hz, sabit su bağlantısı. Makine 02/26 tarihinde tekrar bakımdan geçirilmiştir. Renk: resimlerde ve incelemede görüldüğü gibi. Üretim yılı: 2018. Makine numarası: 08616. Durum: kullanılmış.
Dkjdpfxjy Tk I Eo Ahrjn
Küçük ilan
Vilnius
1.903 km
Tam üretim hattı
BUD-MASZmonterrey
Çağrı
Koşul: ikinci el, Üretim yılı: 2007, Fonksiyonellik: tamamen fonksiyonel, For sale: BUD-MASZ Monterrey tile profile roofing sheet production line
Condition: Used, but fully operational. The line is currently connected to production – it is possible to test it on-site.
Technical specifications:
Manufacturer: BUD-MASZ (Poland)
Profile: Monterrey
Year of manufacture: 2007
Motor power: 15 kW
Designed for forming steel roofing sheets with a tile profile
Robust frame construction ensures stable and precise operation
Dsdpfx Aexhgl Tohrjkn
Line purpose:
The equipment is designed for profiling steel sheets into tile-effect roofing.
Suitable for both serial production and custom orders.
Manufactured in Poland, known for reliable quality and durability.
The machine is connected and can be inspected and tested in operation.
Feel free to contact us if you have any further questions.
Küçük ilan
San Giovanni Al Natisone
1.947 km
Deri işleme makineleri stoğu
Çağrı
Koşul: ikinci el, Deri işleme makineleri stoğu
Dodpfx Ahoy Ud Tkerekn
Küçük ilan
Mühlau
2.199 km
Dal parçalayıcı, ağaç dal parçalama makinesi, odun kıyma makinesi
JensenA425
Çağrı
Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2012, çalışma saatleri: 226 h, azami hız: 80 km/s, toplam ağırlık: 1.800 kg, Jensen A425 DI – only original 226 hours!!
Price:
net: €16,499 negotiable
gross: €19,575 negotiable
Year of manufacture: 2012
First registration: 12/2012
Operating hours: 226
Original paint!
Oil and air filter change completed (invoice available)
Like-new condition – see photos
Chipper in near-new condition, without DPF or AdBlue
Chipping diameter: 200 mm
Weight: 1,800 kg
Chassis: 80 km/h approval
Upper structure rotatable / discharge chute rotatable
Engine: Hatz diesel
Power control / overload protection
Blades: Standard cut
Condition – see photos
Documentation available (Registration Certificate Part II /
Registration Certificate Part I / valid TÜV)
Height-adjustable drawbar with ball hitch
Sale to commercial, trade, and private buyers
An invoice with shown VAT will be issued.
Please also check our other offers!
Sale without warranty, guarantee, or return, and under exclusion of liability for material defects.
All information, images, and notes do not constitute warranted characteristics and serve exclusively for general description. The information is provided to the best of our knowledge but cannot be guaranteed.
Offer subject to change. Errors, modifications, and interim sale reserved.
Dodey Dtyfjpfx Ahrekn
Küçük ilan
Mertendorf
2.263 km
Ağaç parçalama makinesi / Parçalayıcı
RÖSSLERMHR630 ecoline
Çağrı
Koşul: yeni, Üretim yılı: 2026, çalışma saatleri: 4 h, Fonksiyonellik: tamamen fonksiyonel, güç: 15 kW (20,39 bg), toplam ağırlık: 1.200 kg, toplam uzunluk: 1.750 mm, toplam genişlik: 1.200 mm, toplam yükseklik: 1.640 mm, çalışma genişliği: 630 mm, giriş voltajı: 400 V, kumanda kabini yüksekliği: 200 mm, kontrol paneli uzunluğu: 600 mm, kontrol kabini genişliği: 600 mm, bıçak sayısı: 15, dönüş hızı (maks.): 100 dev/dak, rotor çapı: 260 mm, rotor genişliği: 630 mm, elek delme: 15 mm, giriş akımı türü: Klima, garanti süresi: 12 aylar, Donanım: dokümantasyon / kılavuz, Scrap Material Shredder Chopper Wood Shredder MHR630 ecoline
The MHR ecoline series are robust and energy-efficient wood shredding machines, designed for reliable continuous operation in commercial environments. These plug-and-play shredders stand out for their high performance, low energy consumption, and excellent value for money. This makes the chippers ideal for craft businesses, recycling companies, and wood-processing plants seeking an economical yet powerful solution.
Advantages
Dodpfxozbkxfe Ahrekn
- Continuous, uniform shredding process
- High performance with low energy consumption
- Sturdy construction
- Larger feed opening
- Excellent value for money
- Plug-and-play (5-pin CEE plug, 400V, 32A three-phase current)
- Siemens PLC controlled
- MHR630 ecoline
Rößler Recycling Shredder "Made in Germany"
Küçük ilan
Wymysłów
1.958 km
SCHWANOG "RAPID" SBM 63G eleme makinesi, 2–15 mm eleklerle – tam set
Maszyna przesiewająca SCHWANOG „RAPID” SBM 63G z sitami 2–15 mm – kompletMaszyna przesiewająca SCHWANOG „RAPID” SBM 63G z sitami 2–15 mm – komplet
Çağrı
Koşul: mükemmel (kullanılmış), Makine, dökme malzemelerin veya küçük metal parçaların eleme ve ayıklanması için kullanılır. Çok iyi durumdadır – komple, orijinal tahrik ünitesi, kontrol dolabı ve kalibrasyon elek seti ile birlikte satılmaktadır. • Üretici: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Üretim yılı: 1972 • Tahrik: Bauknecht motor 0,55 kW, 380/220 V, 2850 d/dk • Kontrol panosu: Carl Kurt Walther GmbH, Wuppertal • Çelik konstrüksiyon, sabit şasi ve taşıma tekerlekleri • 400 V trifaze güç kaynağı • Ahşap çerçevede tam elek seti (numara 1–6) • Elek göz açıklığı: 2 mm'den 15 mm'ye • Eleklerin ayarlanabilir ve değiştirilebilir yapısı • Ana şalter, başlat/durdur kontrolü ve aşırı yük koruması • Durumu çok iyi – fabrikadan söküldü, mekanik olarak tam çalışır • Makine, temel bir genel bakımdan sonra çalışmaya hazırdır. Metal işleme tesisleri, dökümhaneler, endüstriyel laboratuvarlar, granül, kum veya parça ayıklama işlemleri için idealdir.
Dkedpfx Ahoxmt Eqsrsn
Küçük ilan
Irschenberg
2.124 km
Tam teşekküllü kereste fabrikası (mobil)
Wood-MizerLT40 wide
Çağrı
Koşul: ikinci el, Üretim yılı: 2024, çalışma saatleri: 350 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: LT40MG38SDHP5-2.6WSWR, kesme uzunluğu (maks.): 6.100 mm, toplam uzunluk: 8.200 mm, toplam ağırlık: 2.600 kg, yükseklik ayar tipi: elektrikli, kesme genişliği (maks.): 820 mm, Donanım: şasi, 2024 model bu ikinci el Wood-Mizer LT40 wide komple tam testerehanesini (mobil) sunuyoruz.
Dkjdpozagkzofx Ahron
Kesim uzunluğu: 6,1 m
Kesme genişliği (kalas): 82 cm
Maksimum işlenebilir kütük çapı: 100 cm
Üretim yılı: 02/24, yaklaşık 350 saat
38 hp benzinli motor ile tahrikli
SW 10 kesim kalınlığı hesaplayıcı
Elektrikli testere kafası (ileri, geri, yukarı, aşağı)
Motor için elektrikli kavrama
Hidrolik Paket 5 (neredeyse tam donanımlı)
Kütük kaldırıcı, 2 adet sıyırma mengenesi, 2 dengeleyici rulo (biri tahrikli), 3 dikey dayama, kısa kütükler için 1 manuel dikey dayama, kütük döndürücü, merkezi kütük mengene
Lazer
Yol kullanımı için ruhsatlı
Arka tampon biraz eğilmiş ancak tamamen çalışır durumda.
Ek olarak beraberinde verilecekler:
Yaklaşık 60 bant
Koruma brandası
Neredeyse yeni durumda CookiMizer
Hesener'den kısa ve ince kütükler için kütük sabitleyici
Ve ayrıca, örneğin yedek bant makaraları gibi çeşitli aksesuarlar
Küçük ilan
Salzburg
2.039 km
Odun yarma makinesi
YanigavTAM 245
Çağrı
Koşul: yeni, Üretim yılı: 2025, Yanigav Toprak Burgu Makinesi TAM 245
• Kolay üç noktalı bağlantı
• Son derece sağlam, kaynaklı şasi
• 30 ila 90 HP arasında, çok yönlü ve güçlü şanzıman
• Kullanılabilir toprak burgu çapları 10 cm ile 80 cm arasında, maksimum 1,80 m yükseklik
• Aksın her iki yanında 1,30 m yana kayma özelliği
• 245 cm uzunluğunda şasi
• Burgu eğim düzeltmesi (öne/arkaya ve sağa/sola)
• Burgu hariçtir
Dkjdpfor Eznijx Ahren
Küçük ilan
Neckartailfingen
2.332 km
Parçalama tesisi
mütek630 AL
Çağrı
Koşul: yeni gibi (sergi parçası), Üretim yılı: 2024, Özel fiyat: €29,970 net
Bir makine şu anda hemen kullanıma hazır olacaktır.
Hacimli, hafif alüminyum talaşlarını veya talaşlarını parçalamak için ideal makine.
Masif alüminyum parçalar için uygun değildir.
İçermek:
+ Optimize edilmiş kesme geometrisi
+ Uyarlanmış kaydırıcı kontrolü
+ Yüke bağlı kontrollü hidrolik kızak
Dsdpfx Ahogmh H Tjrjkn
(talaşları kesme ünitesine doğru bastırır)
Motor: 18,5 kW; 400V - 50Hz - 3ph,
Bıçak: 40x40mm, birkaç kez döndürülebilir,
Rotor çapı: 260 mm,
Kontrol: Omron PLC,
Kesme mekanizması açıklığı 600 x 800 mm,
Huni hacmi yaklaşık 0,6 qbm,
hidrolik olarak çalıştırılan kaydırıcı
Seçtiğiniz ekran perforasyonu (15 - 40mm)
Emme ağzı Ø 160 mm
Ağırlık yaklaşık 1.300 kg
Boyutlar (uxgxy) yaklaşık 1737 x 1167 x 1650 mm
Aşağıdaki seçenekler ek ücrete tabidir:
- Parçalayıcıyı 30 cm yükseltin (taşıma bandı hazırlığı) + net 2.990 €
- Açılı konveyör bandı (boşaltma yüksekliği yaklaşık 220 cm) +9.770 € net
- Bant üstü mıknatıs + net 6.980 €
- Konveyör bant kontrolü ve bant üstü mıknatısı + net 2.750 €
(Bilgisayar korsanıyla eşzamanlı olarak başlat ve durdur)
Malzemenizle birlikte ücretsiz bir test yapmaktan mutluluk duyarız. Sizi Neckartailfingen'e davet ediyoruz. Malzemenizi bize kargo ile göndermeniz de mümkündür; testi resim ve videolarla belgeleyeceğiz.
Küçük ilan
Neckartailfingen
2.332 km
Parçalama tesisi
mütekMRZ 630 - 18,5 kW
Çağrı
Koşul: yeni gibi (sergi parçası), Üretim yılı: 2025, Demonstration machine with approx. 9 operating hours
Another machine available immediately (ex works Neckartailfingen)
*Options available at extra cost - see below
Included:
+ Profile rotor for increased throughput capacity
We are happy to offer you a free test with your own material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us by freight, and we will document the test with photos and videos.
Motor: 18.5 kW; 400 V - 50 Hz - 3 phase
Cutting blades: 15 pieces, reversible multiple times,
Option Double blade row + €995 net
Rotor diameter: 260 mm
Dksdob Ny Eyjpfx Ahren
Control system: Siemens S7-1200 PLC
Cutting unit opening: 630 x 820 mm
Hopper volume: approx. 0.6 m³
Hydraulically operated pusher
Screen perforation selectable (10 - 40mm)
Extraction port Ø 160 mm
Weight: approx. 1,300 kg
Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm
Moisture content: < 30 % dry basis.
Standard features included:
- V-rotor for maximum throughput
- Control cabinet with Siemens PLC
- Automatic star/delta start
- Fast hydraulic system
- Automatic stop when rotor is idling
- Speed 70-90 rpm for high throughput
- Intermittent control to avoid idle times
- Performance-enhancing step control for hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-dampening machine feet
- CE compliant.
Optional shredder equipment at additional cost:
- Increase shredder height by 30 cm (preparation for conveyor belt) + €2,080 net
- Eco rings: + €1,980 net
(recommended for more than 20% hardwood content)
- Double blade row + €995 net
- Special scraper + €990 net
(recommended for shredding veneer, paper, or materials with a thickness less than 3 mm)
- Inclined conveyor belt + €8,770 net
Angle adjustable: 0-60 degrees
Discharge height: approx. 2000 mm
- Automatic overbelt magnet + €5,980 net
Alternatively, fixed magnetic block above the conveyor belt for manual cleaning + €990 net (for low ferrous content)
- Control for conveyor belt and overbelt magnet + €2,750 net
(Start and stop each synchronised with the shredder) alternatively manual start/stop of belts + €595 net
Requirements for raw material:
- Moisture content (dry basis) must be below 30%
- Installation temperature: heated area with minimum +5°C
- Metals and mineral impurities such as sand, stones, etc. lead to increased wear
Güven mührü
Werktuigen tarafından sertifikalandırılmış bayiler

Küçük ilan
Neckartailfingen
2.332 km
Plastikler için parçalama tesisi
mütek630 K
Çağrı
Koşul: yeni gibi (sergi parçası), Üretim yılı: 2024, Specialized machine for the shredding of plastics
Base machine from €24,990 net
Ideally suited for shredding:
- Paper, cardboard, pipes, profiles, boxes, canisters, buckets, cans, pallet wood offcuts, etc.
Dksdpfx Ajd H R Sxjhrsn
- Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET
Included features:
- Special rotor with embedded knives (reduced load absorption)
- Narrow cutting gap between rotor and counter knives
Motor: 18.5 kW; 400 V – 50 Hz – 3 phase
Control: PLC
Feed opening (top): 600 x 800 mm
Parts should be max. approx. 500x500 mm in size
*Height is less relevant
Hydraulically actuated pusher,
Screen perforation as required (25–40 mm)
For plastics, coarser screens (30–40 mm) are recommended
*For finer granulation, a two-stage size reduction system with a downstream MVZ granulator (screens 5–15 mm) is recommended
Extraction port diameter: 160 mm
Weight: approx. 1,300 kg
Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm
Additional options available at extra cost:
- Shredder raised by approx. 25 cm (preparation for conveyor discharge) + €1,980 net
- Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net
- Overbelt magnet + €5,980 net
- Controls for conveyor and overbelt magnet + €2,750 net (synchronized start/stop with shredder)
- Alternatively, manual start/stop control for conveyor + €595 net
Material requirements:
- Moisture content (atro) must be below 25%
- Metals and mineral contaminants such as sand, stones, etc. will cause increased wear.
We are happy to offer a free test using your material. You are welcome to visit us in Neckartailfingen for this purpose, or you can send your material via freight service and we will document the test with photos and videos.
---
*Only suitable for brittle plastics of medium hardness,
*Not suitable for elastic or extremely hard and heavy plastics, as this would impact the durability of the system.
---
Optional: next larger machines available
Base machine: Shredder MGZ 830 K-S – 18.5 kW
Feed opening (top): 800 x 1,000 mm
Parts should be max. approx. 720x700 mm in size
*Height is less relevant
from €39,995 net * options priced separately
Base machine: Shredder MGZ 1030 K-S – 22 kW
Feed opening (top): 1,000 x 1,000 mm
Parts should be max. approx. 900x700 mm in size
*Height is less relevant
from €49,975 net * options priced separately
Base machine: Shredder MGZ 1330 K-S – 37 kW
Feed opening (top): 1,300 x 1,200 mm
Parts should be max. approx. 1,200x700 mm in size
*Height is less relevant
from €79,975 net * options priced separately
Küçük ilan
Neckartailfingen
2.332 km
Parçalama tesisi
mütekMGZ 1330
Çağrı
Koşul: yeni, Üretim yılı: 2026, Delivery time:
approx. 4-5 months
Your advantages:
+ Extremely large cutting chamber opening; 1300x1200 mm
+ Special rotor suitable for both hardwood and softwood
+ Energy-efficient and powerful with 37 kW start-up power
Technical data:
Color: grey / blue
Top feed opening (mm): 1,300 x 1,200
Hopper volume (cbm): 1.6 m³
Rotor diameter (mm): 368
Rotor speed (rpm): 65 - 125
Power requirement (kW): 37
Screen perforation (mm): 10 - 40 – selectable
Tools: 37/70 knives
Extraction nozzle Ø (mm): 200 mm
Dimensions: 2430x2410x1735 mm (LxWxH)
Weight (approx. kg): 3,500
Optional at an extra charge:
- Second row of knives for up to 30% higher throughput
- Fast hydraulics for increased throughput
- Conveyor discharge preparation
- Conveyor belt
- HAWK-EYE overband magnet
*To also shred veneer or paper (anything thinner than 3 mm), we recommend a segmented floor. Special option available at an extra charge.
---
Slider extension option *available at extra charge
Maximum pallet size up to 1200/1400 mm possible (with the slider extension option, the top cutting chamber opening is 1300x1700 mm, extra charge + €14,975) *significantly longer production time required.
*Larger machines available on request
---
Raw material requirements:
- The moisture content (atro) must be below 20%
Dkjdpfx Ahegbkkrsrsn
- The material feed must be free of metal and mineral contaminants. Damage to the tools and/or increased wear may occur as a result.
Küçük ilan
Neckartailfingen
2.332 km
Parçalama tesisi
mütekMHB; MHZ
Çağrı
Koşul: yeni, Üretim yılı: 2026, Comprising Large Bale Breaker Type MHB and Straw Shredder Type MHZ
1) Bale Breaker MHB:
Special price from €22,975 net (lead time approx. 15 weeks)
Suitable for round or square bales.
Includes frequency inverter (FU) – regulates the speed of the scraper floor.
Bales are placed onto the scraper floor and the feed to the milling rotor is engaged. The rotor tines tear straw from the bale and propel it into the hopper. The combination of bale breaker and straw shredder is ideal for this process.
Technical specifications – Bale Breaker:
Processing: 1–2 bales per hour
up to max. 600 kg per hour (depending on screen size and power rating of the straw mill. Without a straw mill, bale breaker processes up to 900 kg/h of straw).
Max. bale size (square): 2400 x 1200 x 800 mm (LxWxH)
Milling rotor motor: 5.5 kW, 380 Volt
Scraper floor drive: 0.75 kW, 380 Volt
Dimensions: 3750 x 1730 x 2460 mm (LxWxH)
Weight: 400 kg
2) Straw Shredder MHZ 600 – 11/15 kW; available immediately
Special price from €6,995 net
Upgrade to larger straw shredder (18.5 kW): +€2,750 net
Technical specifications, MHZ with special hopper:
Motor: 15 kW, 380 V electric motor
Diameter: 600 mm
Hardened cutting blades
Sieve with interchangeable inserts
Selectable mesh sizes: (10, 12, 15), 22, 30, 45 mm
With star-delta switch, overload protection, and 8m ready-to-connect cable
Discharge nozzle diameter: 160 mm
Blow distance: approx. 12 m
Dimensions: approx. 1600 x 1020 x 1360 mm (LxWxH)
Weight: approx. 240 kg
---
Options for additional charge:
Feed auger: +€970 net
Cyclone (suspension to be provided by customer), should be max. 10 m away
+€2,970 net
Djdpfx Ahjb Nulherjkn
Basic filter: €1,750 net
---
Further options:
Industrial extraction system (demonstrator):
from €9,950 net
Optional rotary valve (for pressure-free material discharge):
+€5,750 net
Control panel: from €1,620 net
Special bale breaker extension 3 m (other dimensions on request):
+€9,750 net
Briquetting press MPP 180 S; lightly used demo model
70 mm briquette – up to 100 kg/h
from €39,700 net
* Larger machines on request
---
Description:
muetek Bale Breaker is designed for breaking up round and square bales of hay and straw. The shredder mounted to the bale breaker processes straw from all cereals, hay, maize, and miscanthus. The muetek MHZ/MHB series machines stand out due to their robust construction and heavy-duty design.
muetek Bale Breakers of the MHB series are equipped with a chain conveyor, onto which the straw bale is placed using a front loader. The support is adjustable according to bale type.
The chain conveyor pushes the bale against the milling rotor; feed speed is adjustable. The milling rotor is fitted with multiple teeth to break up the bale. The separated straw is then discharged.
---
The machines are generally suitable for dry starting materials:
- Straw
- Hay
---
Processing hemp bales is only possible with a special breaker:
Surcharge approx. €9,720 net (depending on design).
Hemp cannot be shredded by the straw mill.
Requirements for input material:
Moisture content max. 12%
Küçük ilan
Neckartailfingen
2.332 km
Parçalayıcı, ağaç parçalama makinesi
mütekMGZ 1030 - 22 kW
Çağrı
Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2025, çalışma saatleri: 55 h, Machine with special rotor
Available immediately
Advantages:
+ Special rotor with reduced knife projection, suitable for hard and soft materials
+ 22 kW motor
+ Effective square blades
*For pallets: Up to a maximum of 10 pallets per hour *throughput depends on screen and material. Significantly higher throughput for smaller wood scraps.
Motor: 22 kW; 400 V - 50 Hz - 3 phase
Screen: 15/20 mm or upon request (10 to 40 mm possible)
Hydraulically operated pusher
Current screen perforation (15/20 mm) *can be changed
Suction port Ø 200 mm
Feed opening 1000x1000 mm
Dimensions: 2000x1800x1645 mm
Sample image above: Color of the unit may vary
Weight: 1920 kg
Standard equipment included:
- Control cabinet with PLC control
- Automatic star/delta start
- Fast hydraulic system
- Automatic stop when rotor is idling
- Rotor speed 70-90 rpm for high throughput
- Cycle control to avoid idle times
- Performance-enhancing step control of the hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE compliant
The following options are available at extra cost:
- Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net
- Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net
- Overband magnet + €6,980 net
- Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with shredder)
Dedpfx Aex Af Rdjhrskn
- Expanded feed hopper 1500x1500 mm + €3,480 net
Raw material requirements:
- Moisture content (atro) must be below 25%
- Material feed must be free of metal and mineral contaminants. Otherwise, tool damage and/or increased wear may occur.
Sizin için aramayı kolaylaştırıyoruz: "3e-grabtrade stokta tam parçalama hatti"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay






































































































































































































































