Kullanılmış Stas Agrostar V8 / V9 /V10 *Neufahrzeug* Ab 45M³ satın al (19.733)

Koşul: mükemmel (kullanılmış), Üretim yılı: 2011, 1 x Yağ Buharı Sökücü Absolent AB A mist 10C HEPA filtreli Üretim yılı: 2011 Çok iyi durumda. Aspiratör sistemini depomuzda inceleyebilirsiniz. Lodstp Thbjpfx Amkjhg

Koşul: ikinci el, azami yük ağırlığı: 28.150 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2019, yükleme alanı hacmi: 92 m³, Üretim yılı: 2019, Donanım: ABS, * Stas 3-axle walking floor S300ZX * 10 mm floor * approx. 92 m³ load volume * Remote control * Rolling tarpaulin * Air suspension * Two lift axles * Disc brakes * JOST axles Ledpjw H Hprofx Amkehg * EBS * ABS

Koşul: iyi (kullanılmış), Tek Vidalı Vida çapı 25 mm Ljdpfx Amsvri Ddjkjhg Boyutlar (UxGxY) 1860 x 900 x 1850 mm Seçenekler • Taşıma dahil • Soğutma banyosu dahil

Koşul: ikinci el, Üretim yılı: 1962, Fonksiyonellik: tamamen fonksiyonel, Adolf John Hanau AB II Lhsdpfxjuprqwo Amkeg Kereste testeresi Ağaç testeresi Düzeltme testeresi Merkez yükseklik 105 mm, kolon boğazı 650 mm, genişlik 160 mm, konveyör bandı 5-45 m/dak İlk sahibinden! Konveyörlü ağırlık yaklaşık 1250kg 400A 32A'ya bağlantı Kullanılmış, işlevsel durumda

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2008, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium parts, continuous rubber strip pressure-bonded to the longitudinal members, maximum stability via integrated tipping shaft with wear-resistant, pressed-in special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit Axles and Suspension, Disc Brakes Jost-disc axle units 3 x 9 tonnes with DCA air suspension, lift and lower valve, load gauge, 3rd axle automatically liftable Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 50-60% tread on silver steel rims, 11.75x22.5 ET 120 Landing Legs Mechanical support legs, load capacity 2 x 20 t, swing feet used for air suspension Lsdpfx Amoxf Spfokohg Brake System According to E.C. standard, two-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E system 2S/2M, with RSS (Roll Stability Support), ALU air tank Electrical System According to StVZO regulations, with two 5-chamber Aspöck LED tail lights, 24 Volt system with two 7-pin and one 15-pin socket at the front, EBS socket, with LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Dump Bed ALU dump body, side walls with welded vertical aluminium profiles, floor approx. 6 mm in highly wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall angled design in 4 mm ALU with reinforcing profiles for hydraulic cylinder mounting, side walls in 3 mm hard alloy, straight rear wall, automatic pneumatic (lockable) universal tailgate with pendulum and 2/3-1/3 barn door configuration, double hinge, made from 4 mm thick aluminium, 1 grain chute with water protection, wear plates fitted on side approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Hydraulic cylinder mounted at the front wall, operating pressure 150 bar, brand Edbro, with approx. 2 m hydraulic hose and 1" quick-release coupling Accessories 6 Parlok plastic mudguards with 2 Stas splash guards, 3 m aluminium ladder, reinforced and foldable underrun protection with 2 towing eyes, one foldable side underrun guard, catwalk on front wall with access ladder (left side), 3 swivelling ALU bows, 1 central additional bow holder, rolling tarp with aluminium tube in centre, rolling tarp system, approx. 660g/m² quality, tarp fastener with quick-action lock (no lashing straps), wheel brace, 2 chocks, toolbox type 800, continuous splash flap on underrun guard, etc. Offer and images are subject to prior sale/change.

Koşul: iyi (kullanılmış), Üretim yılı: 2005, Fonksiyonellik: tamamen fonksiyonel, Kullanılmış 2 metre CNC abkant presi Trumpf Lhodsx I N Awjpfx Amkog Model: V85 Kapasite: 2050 x 85 ton Delem CNC kontrol ünitesi Y1, Y2, X ve R eksenleri CNC kontrollü Wila hidrolik üst sıkıştırma Üretim yılı: 2005 Takımlar hariç

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg). Axles and Suspension "Disc brake 22.5" Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable). Tyres and Wheels 6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Landing Legs Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot. Brake System In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system. Electrical System According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection. Superstructure / Tipper Body "Body fully welded inside" Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward. Hydraulic System "Cargo Floor" Moving Floor System Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses. Lodpsyh S Aiofx Amkjhg Accessories 6 PVC mudguards with 2 anti-spray mud flaps,

Koşul: iyi (kullanılmış), Üretim yılı: 1999, makine/araç numarası: 883345, Offer 25513 Technical Data: - Max. working length: 2050 mm - Frame opening: 1750 mm - Max. pressing force: 850 kN - Distance table / ram: 535 mm - Throat depth: 410 mm - Ram stroke: 365 mm - Stroke speeds: - Approach speed downwards rapid traverse: 200 mm/sec - Return speed upwards: 135 mm/sec - Pressing speed downwards: 1 – 11 mm/sec - Total drive power: 13 kVA - Required space: approx. W 2700 x H 2900 x D 2100 mm - Weight: approx. 9100 kg Equipped with: - 5-axis CNC control DELEM, DA Y1 + 2; X; R; Z Lsdpfxex Exzke Amkshg - Two-hand control panel with foot switch - CNC-controlled crowning system - CNC-controlled backgauge with height adjustment 5 – 860 mm - Hydraulic tool clamping - Pneumatically assisted die table displacement

Koşul: iyi (kullanılmış), Üretim yılı: 2000, makine/araç numarası: 883454, Offer 25515 Technical Data: - Max. working width: 1040 mm - Max. material thickness (at 40 kg strength): 3.5 mm - Table width: 300 mm - Throat depth: 100 mm - Working height: 880 mm - Front angle stop - 3 additional front support arms - Rear gauge adjustable by hand: 5 - 550 mm - Drive: 400 V / 5.5 kW Lhjdpfx Amex E Rfbskog - Electric foot switch - Required space including rear gauge, without front support arms: approx. W 1500 x H 1250 x D 1400 mm - Weight: approx. 1400 kg

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2015, çalışma saatleri: 6 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 17284006, toplam genişlik: 1.000 mm, toplam uzunluk: 2.800 mm, toplam yükseklik: 1.580 mm, toplam ağırlık: 125 kg, giriş voltajı: 230 V, hava ihtiyacı: 12 m³/saat, hava basıncı: 7 bar, güç: 0,5 kW (0,68 bg), giriş frekansı: 50 Hz, Donanım: dokümantasyon / kılavuz, Yarı otomatik tüp dolum makinesi Medipac AB üretimi MF10A modelidir. Dolum kapasitesi yaklaşık 24 tüp/dakikadır. Dolu tüplerin bulunduğu magazin yaklaşık 10 tüp aldığında makine bekleme (Stand by) moduna geçer ve dolu tüpler magazinden alındığında makine otomatik olarak tekrar çalışmaya başlar, bu da operatörün makineyi kolayca kullanmasını sağlar. Makine, çapı 25 mm olan tablet formatı ve dış çapı 29 mm olan tüp için donatılmıştır; talep üzerine farklı formatlar da mümkündür. İngilizce dokümantasyon mevcuttur. Ledpfxsxqf Rmo Amkjhg

Koşul: yeni, Üretim yılı: 2027, ZEROLABOR ROBOT SYSTEM for Timber Frame Construction The Randek ZEROLABOR robot system is a production cell in which various work processes are performed fully automatically by robots. The system is flexible and can be configured to meet customer-specific requirements. The robot cell can be integrated into existing production lines or operate as a standalone unit. The system enables the near fully-automatic production of walls, floors, and roofs using timber frame construction methods. Automated processes: - Panel handling: Panels are removed from various stacks using vacuum suction cups and placed onto the timber frame structure according to the CAD file. The system is flexible and can handle different panel sizes. - Fastening of panels by screwing, stapling, and/or nailing. - Creation of cut-outs for electrical installations, windows, etc. - The system can process 1, 2, or 3 types of panels. - Inkjet marking of components. - Gluing. - Waste management: plasterboard and OSB waste are deposited at defined locations or, if required, directly into the waste container. Lhodpjduub Ujfx Amkeg - Efficient dust extraction. - Alignment of the component with the worktable. - Positioning of studs prior to nailing, accurate placement of nails/staples in the studs.

Koşul: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, Randek kesme testeresi JS400C, ahşap parçalarının ucunda kesikler yapmak, örneğin dikey saplara bir kayış kirişi yerleştirmek için tasarlanmıştır. Makine ahşabı pnömatik olarak sabitler ve 400 mm çapındaki iki testere bıçağıyla iki kesim yapar. Maksimum uzunluk 380 mm'dir ve kesme derinliği maksimum 115 mm'ye ayarlanabilir. Testere, ayak pedalı kullanılarak hızlı ve kolay bir şekilde çalıştırılabilir. Fonksiyonel tanım Çentiklenecek kütük, örneğin bir sap, kapalı testere yuvasına ayarlanan dayanağa kadar itilir. ve. Çıkıntılı uç bir silindir bloğuna yerleştirilir (teslimata dahil değildir). Takılan keresteyi pnömatik olarak sabitlemek ve kesme işlemini tetiklemek için bir ayak pedalı kullanılır. Teknik açıklama - çentik derinliği: 30 - 115 mm - Çentik uzunluğu: 10 - 380 mm - Ahşap kalınlığı: 30 - 70 mm - Elektrik bağlantısı: 3 x400 V, 50 Hz, 25 A - Basınçlı hava: 0,5 - 0,8 MPa (5 - 8 bar) - Testere bıçakları: HM 400 / 30-3,5 / 2,5 / 40 Güvenlik Testere, bir kapak plakası müdahalesine karşı iyi bir şekilde kapatılmıştır. Kapak plakası açıldığında, elektrik akımı otomatik olarak kesilerek yaralanma riskini en aza indirir. Avantajları - Çentik açma / kesmeyi etkili ve hassas hale getirir - Esnek ve kurulumu kolay - Kolay kullanım - Ayarlanmış çalışma yüksekliği ve makineyi ayak pedalı ile çalıştırma imkanı çalışma koşullarını sağlar Lhodpfx Asd Arwhemkeg

Koşul: yeni, Üretim yılı: 2026, Kelebek Masa BS20 Randek kelebek masa BS20, ahşap veya çelik çerçevede prefabrik duvarlar, çatılar, zeminler, üçgen uçlar üretirken etkili bir araçtır. Tablolar ayrı olarak kullanılabilir veya bir satıra yerleştirilebilir. Yapı bileşeninin karesini garanti eden kenetleme fonksiyonu sayesinde yüksek kalite elde edilir. Yapı elemanının döndürülmesi kontrollü bir otomatik işlemle yapılır. Yüksek verimlilik elde edilir; çalışma masası prefabrik ev üretimi için optimize edilmiştir. Fonksiyonel açıklama: Çalışma masasında / kelebek masasında aşağıdaki işlemler yapılabilir: • Yapı bileşeninin otomatik olarak döndürülmesi, yukarı kaldırıcı tablosu, kontrollü bir işlem sırasında alıcı masasına ve bina bileşenine bina bileşeni üzerinde yükselir ve döndürür Çevrildi. • Yapı bileşeninin karesi, tablonun uzun tarafındaki pnömatik kenetleme işlevi, yapı bileşenini kare şeklinde yüksek kaliteli bir yapı bileşenine bastırır. â € ¢ Tablo, aşağıdaki işlemleri etkin bir şekilde gerçekleştirmek için geliştirilmiştir: çerçeve yapımı, giydirme ve tırnak levhaları, kağıt folyo plastiğin çivilemesi ve yapı bileşeninin yalıtımı. Teknik açıklama: • Uzunluk: 6000, 7500, 9000 ve 12000 mm uzunluklarda mevcuttur 2250 - 3100 mm arasında genişlik ayarı, farklı genişlikler arasındaki ayarlama manuel kontrol ile kolayca yapılır. 91 dereceye kadar hidrolik olarak değerlendirilebilir P Pnömatik kareleme fonksiyonu [...] Lhedpfx Ao Nn Hyomksg

Koşul: yeni, Randek Cut-Off Saw SPL728 Computer-controlled, rotary, with LAN (Ethernet) connection for downloading or saving saw jobs (text file in ASCII format). The number of programs that can be stored is limited only by the hard drive capacity. The graphical touchscreen (HMI) allows the operator to monitor all details directly on the screen or enter saw jobs directly, minimizing interruptions in the production process. Saw blade: Tungsten carbide-tipped, low-noise, 700 mm diameter / 116 teeth, 360° horizontally rotatable, Tiltable from 90° to 28°, 250 mm cutting depth. Motor power: 7.5 kW. Automatically closing, interlocked safety guard made of plastic. Infeed table, optionally 4.0 / 5.8 / 8.2 / 10.6 m long Powered infeed roller, IRO4-120. Transport rollers 76 mm diameter, roller length 400 mm, roller spacing (C/C) 500 mm. Rear stop 120 mm. Pneumatic hold-down device, 2 pieces. Conveying direction selectable from left or right. Outfeed table, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer-controlled roller conveyor type LX. Guide roller for outfeed, rollers 76 mm diameter, length 400 mm. Rear stop 120 mm. 2 computer-controlled longitudinal stops, driven by toothed belt. Stop 1 - designed for cutting lengths up to 50 mm. Stop 2 - traverses the entire length of the outfeed table. Lodpjfg Tatjfx Amkjhg The positioning of the longitudinal stops and the adjustment of the cutting angles are both computer-controlled and independent. Maximum traverse speed of the longitudinal stops: 1 m/s. Wood infeed: 1 unit Retracting devices: 2 units Conveying direction: selectable from left or right.

Koşul: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, Presleme tertibatı ve kaldırma donanımlı çalışma masası Lsdpsx Tdtnjfx Amkehg

Koşul: yeni, azami yük ağırlığı: 28.240 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.820 mm, yükleme alanı hacmi: 91 m³, Donanım: ABS, Stock no. 5559 New vehicle in stock – available immediately! Purchase, rental, or rent with a purchase option upon request! Side tarpaulin retrofit available for an additional charge! Stas 91 m² moving floor / 10 mm flat floor / TÜV load certificate ---- * Manufacturer: Stas * Model: BIOSTAR – Walking Floor trailer * First registration: – (New vehicle) * Color: Galvanized chassis, body in RAL 7016 silver grey, tarpaulin SIO 7340 * Volume: approx. 91m³ (13.50m long x 2.475m wide x 2.64m to 2.82m high) * Gross weight: 36,000 kg * Unladen weight (according to registration): 7,760 kg * Payload: 28,240 kg * Axles: 3x SAF axles / 1st axle liftable / starting aid / disc brakes * Tires: 385/65 R22.5 new on Speedline Diamond aluminium rims * Wheelbase: 7.85 m * Suspension: ECAS air suspension with raise and lower function * ABS / EBS * Cargo Floor CF 500 SL-C with remote control and control box rear left * 21 flat floor boards, 10 mm * 12 pairs of retractable lashing rings in the floor * Welded aluminium end caps * Complete emptying partition with brushes and stainless steel handles * Service door in front wall * Swing doors (50/50) with pneumatic locking * 2x locking bars * Swivelling rear cross member at door closure * Hydraulic connections at the front with 3 m hoses and * Connection possibility beneath the body without hoses * Operator platform with ladder front left * Fifth wheel height: 1,150 mm * Single mudguards * Full load landing legs * Rear aluminium underride guard (one piece, foldable) * Rolling tarpaulin (900g/m²) with tensioning straps * Steel roof bows, foldable and longitudinal lashing straps * 1x tool box rear left * 1x aluminium ladder, 3.80 m long * Load pressure gauge * Smartboard * TPMS tire pressure monitoring system * Aluminium rear buffer * 1x extendable ladder at the rear right * 2x LED work lights in front of axles * 2x LED reversing lights at the rear * 1x LED work light inside front wall * 2 x 3 function lights in upper rear door cross beam New vehicle in stock – available immediately! Purchase, rental, or rent with purchase option upon request! Lsdsv Emk Ujpfx Amkshg Note regarding possible errors in the ad: Despite careful preparation, occasional errors in text or specifications cannot be ruled out. We accept no liability for mistakes, changes, or prior sale. All information provided without guarantee. Please contact us to verify details or for further questions.

Koşul: ikinci el, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2019, * Kaldırma aksı Lodpfx Amsw Rit Tjkohg * ALU jantlar * JOST akslar * Rulo branda * Boş ağırlık: 7.760 kg -----Dahili araç numarası: 10296----Hatalar ve ara satış hakkı saklıdır WhatsApp desteği mevcut! Araçla ilgili sorularınız veya daha fazla bilgi için bizimle WhatsApp üzerinden kolayca iletişime geçebilirsiniz

Koşul: mükemmel (kullanılmış), Üretim yılı: 2014, çalışma saatleri: 37.656 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 85 t, dolum açıklığı genişliği: 1.500 mm, dolum ağzı uzunluğu: 1.100 mm, balya genişliği: 1.100 mm, balya yüksekliği: 750 mm, balyanın ağırlığı: 650 kg, toplam ağırlık: 25.000 kg, yağ tankı kapasitesi: 1.000 l, son revizyon yılı: 2024, hacim debisi: 410 m³/saat, taşıma genişliği: 2.400 mm, taşıma uzunluğu: 9.300 mm, İyi günler, Mevcut olması halinde, Presona AB üreticisinden LP 85 VH1 tipi kullanılmış bir balya makinesini sizlere sunuyoruz. Aşağıdaki teknik veriler üreticinin kullanım kılavuzundan ve broşürlerinden alınmıştır, bunların doğruluğu veya eksiksizliği konusunda hiçbir sorumluluk kabul edemeyiz. Üretici Presona AB, İsveç Tip LP 85 VH1 Yapım yılı 2014 25 Mart itibariyle toplam çalışma saati 37.565 saat Pres kuvveti ana pres 85 t Özgül presleme kuvveti 100 N/cm² Pres kuvveti ön pres kapağı 28 t Yerleştirme oluğunun boyutları 1.500 x 1.100 mm Dolum hacmi / presleme döngüsü 2,7 m³ Çalışma koşullarında verim 410 m³/saat Balya boyutları 1.100 x 750 mm Tahrik gücü 55 kW 5 katlı dikey bağlama Hidrolik yağ tankı hacmi 1.000 L Pres boyutları 10.350 x 2.400 x 3.150 mm (U x G x Y) Makine ağırlığı pres yaklaşık. 25 ton Bir duyuru: Makine bir geri dönüşüm tesisinde kağıt, karton, film ve şişe, kova, bidon ve varil gibi plastikleri sıkıştırmak için kullanıldı. Matbaanın durumu iyi. Son 3 yılda çok sayıda aşınan parça ve komple aksam değiştirildi. Makinenin bakımı düzenli olarak yapıldı. Ljdpfjv T I Evsx Amkshg Bu basının ilginizi çekmesi bizi mutlu edecektir. Servis ekibiniz Mertens & Frowein GmbH

Koşul: yeni, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, - Panama floor 900g - 10 mm floor thickness - V-sheets 2000x1500x4 - Service door on the front wall - 12 pairs of lashing rings in the front wall Chassis: Reinforced continuous chassis, new superstructure manufactured in self-supporting design with appropriate reinforcements in the lower chord for particularly high stability and strength, 140 mm high cross members in reinforced design Axle and suspension Disc brakes 22.5, Jost axle assemblies, 3 x 9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA), first axle with traction help (without tractor unit equipment) Tyres and wheels 6 wheels with 385/65 R 22.5 premium tyres (manufacturer optional) mounted on steel rims, 11.75x22.5, ET 120 Landing legs Mechanical landing gears, 2 x 20 t support load Brake system EBS E-System by Wabco with RSS system (Roll Stability Support) and premium modulator, spring-loaded brake system acting on two axles, operated from the rear Ljdpofi Nmpofx Amkohg Electrical system According to EC directives 91/633 and 97/28, with 2 Aspöck Europoint five-chamber lamps integrated in the aluminium rear end, 24V system with 1 x 15-pin and 2 x 7-pin sockets, LED side marker lights, 2 separate LED reversing lights integrated in the underrun protection Superstructure / Tipper body Superstructure fully welded inside, reinforced side walls. Aluminium tipper body, side walls made of 30 mm strong aluminium plank profiles (2-3 mm wall thickness), 600 mm wide, fully welded with lower and upper chord, plank profiles fully welded on the inside. Aluminium front wall with 600 mm plank profile, 2-3 mm wall thickness, straight design, with 2 aluminium swing doors 50/30 mm thick, with sliding residual discharge wall with Kevlar cover approx. 1,500 mm length, plus side Kevlar curtain seal Hydraulic system: 'Cargo Floor' moving floor system Moving floor system in the body floor with hydraulically actuated aluminium profiles, mounted on aluminium square profiles with approx. 880 PE-HD sliding elements, CF type 8 mm floor design, fixed sections at the front wall, separate hydraulic line connection under the vehicle with fixed sections, operating pressure 190 - max. 240 bar, aluminium end pieces welded in the moving floor, without hydraulic hoses Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 1 aluminium spare wheel holder, side aluminium underrun protection in foldable design, 1 plastic toolbox approx. 860x460x400 mm, 3.7 m aluminium ladder, tarpaulin approx. 660g/m^2 with tarpaulin system incl. rolling slat, optional with side tension belts or quick release, catwalk on front wall with access ladder, 3 steel hoops with swing-out and lockable fastener, aluminium protective cover with foldable hinges for lighting, etc. +590€ delivery cost Unladen weight: approx. 7,700 kg Offer and photos non-binding

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 87 m³, Chassis Manufactured using self-supporting aluminum construction with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregate chassis made of aluminum, 140 mm frame height (max. 39 t), axles and suspension with disc brakes 22.5”, Jost axle units 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle can be lifted separately with start-assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 (manufacturer’s choice) on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel version + approx. 120 kg). Landing gears Aluminum drop leg landing gears, make: Alu-Leg, 2 x 10 t support load, for air suspension we use swivel feet. Brake system According to E.E.C. standard, dual-line brake system, Wabco EBS E-System with RSS (Roll Stability Support), spring-actuated parking brake acting on two axles with control at the rear, aluminum air reservoirs, premium modulator. Electrical system According to StVZO regulations, with two five-chamber lights type Aspöck Europoint III integrated into the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, with LED side marker lights, 2 work headlights at the rear, 2 LED work headlights at the sides at the height of the landing gears, 1 LED work headlight inside front left operable from outside. Body/tipper body — "Body fully welded inside" Bulkhead load 17,250 daN, rear and side walls 10,250 / 13,400 daN, aluminum tipper body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with bottom and top chords, plank profiles fully welded inside! Floor as moving floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 7 t/m², closely spaced crossmembers (approx. 350 mm), aluminum bulkhead with 600 mm plank profile, 2-3 mm thick in straight design, special aluminum corner profiles in chamfered design, smooth rear wall in straight design with 2 aluminum swing doors 50/30 mm thick with 4 locking bars, fitted in a welded aluminum rear frame, mounted on Teflon and stainless steel bearings, traveling aluminum wall suspended from reinforced upper aluminum chord with "Kevlar tarp" for complete emptying, lateral brush sealing and additional Kevlar tarp at the sides, integrated discharge funnel with foldable cover plate at the rear left floor edge and operable from outside, inspection window at rear left, one sampling slider per rear door (total 2), service door on left in bulkhead. Lhjdpfx Amegcw Rioksg Hydraulic system "Cargo Floor" 24 board system — smooth version! Moving floor system in the base with hydraulically driven aluminum profiles on aluminum box profiles, fitted with approx. 880 PE-HD slide elements, approx. 8 mm floor thickness, hydraulic system with approx. 200 mm working stroke, fixed halves at bulkhead, separate possibility for connection of hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves to be specified in size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable remote in a lockable waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber splash guards, aluminum spare wheel holder, foldable aluminum side underrun protection, 1

Koşul: yeni, azami yük ağırlığı: 28.840 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.660 mm, yükleme alanı genişliği: 2.250 mm, yükleme alanı yüksekliği: 2.350 mm, yükleme alanı hacmi: 50 m³, Donanım: ABS, Example: STRONG & LIGHT, now also available for heavy-duty applications, starting from 40 m³ loading volume and 6,600 kg. STRONG & LIGHT, now also available for heavy-duty applications, from 40m³ loading volume and 6,600kg ----Example: High-quality aluminium chassis with high-strength steel body, Lodpfx Amshfiqcskjhg ACTUAL WEIGHT 7,160 KG, Chassis with 3x9t DCA axles, equipped with 430mm disc brakes, 6x steel rims, 1st axle as lift axle with starting aid, aluminium drop-leg supports (can be uncoupled when loaded), foldable underrun protection, digital load pressure gauge (indicates axle load), toolbox, access ladder, Body made from HB450 steel plates, floor thickness 5mm, side walls and rear doors made from 4mm HB450 steel sheets, swing doors (split 1/2 - 1/2) with grain chute on the right, remote unlock for rear doors, doors sealed with round steel (alternative rubber seal available – mud-tight), rolling tarpaulin with central pipe, aluminium fender to protect the roof tarpaulin during loading, platform mounted on the frame, EdBro tipping cylinder with long sleeve, loading height = 3,650mm. (Some vehicles shown include special equipment options) ----For further equipment details and a detailed vehicle offer, please contact us. Various loading volumes, vehicle lengths and heights available. Paintwork and equipment specifications as per customer's requirements +500¤ delivery costs All offers and images subject to change.

Koşul: işlem için hazır (kullanılmış), 14+1 cepli kütük tasnif hattı ( 2 x 7 ) Tip 9001 ölçüm çerçeveli Rema sistemi Ledpfor Hbcfsx Amkshg Hidrolik kütük iticiler

Koşul: ikinci el, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2017, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 13.179 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 2.800 mm, Donanım: ABS, * Stas kayar zemin * Branda * Alüminyum jantlar Lsdpfx Amoxu Th Uskshg * SAF dingiller * Boş ağırlık: 7.790 kg * Model yılı: Dahili araç numarası: 11498-----Hatalar ve ara satışlar saklıdır

Koşul: ikinci el, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2019, yükleme alanı uzunluğu: 13.435 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.690 mm, * JOST axles Lhedpev Hlwisfx Amkeg * Air suspension * Lift axle * Wabco SmartBoard * Storage box * Aluminium rims * Tarpaulin cover -----Internal vehicle number: 10290----Subject to errors and prior sale.

Koşul: yeni, azami yük ağırlığı: 29.560 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.600 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 60 m³, Donanım: ABS, Stock no. 5640 For sale, rent, or rent with a purchase option upon agreement! Approx. 60 m³ STAS agricultural walking floor trailer with integrated grain funnel / service door etc. ---- * Manufacturer: STAS * Model: FARMSTAR – Agricultural Walking Floor Trailer * First Registration: – (New vehicle) * Colors: Chassis RAL 9005, Body RAL 7001, Tarpaulin SIO 7500 * Volume: approx. 60 m³ (10.60 m length x 2.48 m width x 2.30 m height) * Axles: 3x SAF axles / 1st axle lift axle + traction assistance / disc brakes * Tires: 385/65 R22.5 with Speedline Diamond aluminum rims * Wheelbase: 6.25 m * Suspension: Air suspension with raise and lower function * Gross weight: 36,000 kg * Unladen weight (manufacturer’s specification): 6,440 kg * Payload: 29,560 kg * ABS / EBS * CARGO FLOOR CF 500 SL-C with wireless remote control and operator console at rear left * 21-board floor system, 6 mm ribbed * Welded aluminum end caps * Rear end plate made of aluminum * Integrated grain hopper * Additional guides beneath the floor profiles * Emptying partition with brushes and stainless steel handles * Front wall made from aluminum plank profiles * Service door in the front wall * Side walls smooth inside and out (grain version), fully welded * Inspection window in the rear left side wall * Swing doors (50/50) * 4x locking rods * Swiveling rear door crossbeam * Hydraulic connections front with 3 m hoses and * Connection possibility beneath the body without hoses * Pressure 1" female * Return 1" female * Operating platform with access ladders front left and right * Coupling height 1,150 mm * Single mudguards * Heavy-duty landing legs * Rolling tarpaulin (900g/m²) with quick-lock system * Folding aluminum roof bows * Folding rear aluminum lighting bracket Ljdpsxl Ntuofx Amkohg * Aluminum air tank * 1x toolbox front left * 1x toolbox rear right * Shovel and broom holder left side * 1x aluminum double-sided access ladder (2x 8 steps) fixed on right * 1x extendable ladder at rear right * Smartboard * TPMS tire pressure monitoring system * LED 5-chamber taillights * 2x LED working lights in front of the axles * 2x LED reversing lights at rear * 1x internal LED working light at front wall * 2 x 3-function lamps, mounted at top in the rear door crossbeam For sale, rent, or rent with a purchase option upon agreement! Notice regarding possible errors in the listing: Despite careful preparation, errors may occasionally occur in the text or details. We accept no liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or to clarify any further questions.