Tabla freze makinesi

Martin Schwenkfräse T26 Duo Control

Martin T26 DuoControl Spindle Moulder

5/6 kW (6.8/8.2 HP) - 400 V, 50 Hz with neutral conductor, supplied in CE configuration with 2-axis control for spindle height and fence adjustment, motorized swiveling adjustment with digital readout, including swiveling control panel with CPS Gamma V safety device
*with milling arbor 40 mm / 160 mm length

// Table size:
Bsdpozamwujfx Abzslh
2405 mm x 900 mm

// Table height:
900 mm

// Table openings:
electrically adjustable 70 mm - 220 mm

// Weight: 1300 kg

// Spindle speeds:
3000/4500/6000/9000 rpm
with quick-release belt tensioning system

// Readouts:

Electronic speed display
Digital (LED) for spindle height (absolute and relative)
as well as swivel angle
automatic display of correction value for milling depth
dual hour counters for total and batch operating time

// Milling spindle:

electrically swivels via pushbutton +/- 45.50°
electrically adjustable height with rapid and fine feed, with steep taper SK 40,
Dornfix quick-change system
including torque wrench
wear-free electric brake
Electro-pneumatic spindle lock via selector switch

// Spindle stroke:

150 mm with 5/6 kW, 125 mm with 7.5 kW

// Fence:
Aigner Integral fence
Aluminium fence jaws, hard-coat finish with slots for tenoning table or guide rails
Handwheel adjustment with mechanical digital counters
Infeed jaws separately adjustable
Max. tool diameter 250 mm

// Extraction:

Suction connection 120 mm diameter at the fence
Suction connection 120 mm diameter below table

// Maintenance equipment

Centralised lubrication with pump
Spindle lubrication via grease metering valve
1 x open-end spanner
1 x torque wrench for Dornfix system
1 x oil gun
1 x grease gun filled with long-life grease
1 x ball bearing for 62 mm guide ring
1 x FRS95 ring guard for milling work on guide ring, with suction connection and feed bar

// Electrical equipment:

Lockable main switch, automatic star-delta starter, wear-free electric brake
Contact for dust extraction control, undervoltage release, CEE torque connection for power feed unit (=5-pin socket)
Operator buttons for rotational direction selection, motor protection switch and winding protection

BG test certificate no. 991002
GS wood dust certified no. 991001
EC type-tested no. 991003

Additionally:

1 x Electrically adjustable table opening
1 x Swivel-away support for feed unit, motorized height adjustment with control panel
1 x pull-out table extension

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.