Kaynak döner tablası

MB PRO 2 COM 1802

Table diameter: 340 mm
Table load (horizontal): 160 kg
Table load (vertical): 100 kg
Rotation speed: 0.6 - 6.0 rpm
Swivel range: 0 - 90 degrees
Bore: 60.0 mm
Motor: 230 Volt
Machine weight: approx. 56 kg
Dimensions (L x W x H): 385 x 340 x 375 mm

Features:
- The table can be tilted and locked at an angle from 0 to 90 degrees
- Start/stop via a remote foot switch
- Rotational direction selectable (right/left)
- Rotation time adjustable
- The rotary table is equipped with a 60 mm through-hole
- The turntable has a diameter of 340 mm
- Surface is chrome-plated for protection against weld spatter
- Table speed is adjustable from 0.6 - 6 rpm
- Machine control of the welding device via the rotary table controller is possible
- Ground connection transfers 300 A / 100 % duty cycle
- Rotary table and controller are separate units
- HF-protected
- COM 1802 controller with overlap welding function
- Operating manual in German

COM 1802 Controller Functions:
- Forward/reverse operation
- Stepless speed control
- Welding torch on/off
- Overlap welding adjustable
Lhedpfexabm Nsx Ahwsr
- Timer for rotation cycle (2-stroke / 4-stroke)
- Speed display

Note:
The controller runs on 230 V and must not be placed on the welding table.
THE HOUSING OF THE ROTARY TABLE MUST BE DIRECTLY CONNECTED TO THE BUILDING'S GROUNDING SYSTEM.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.