Bant testere

MEBA 320 G HSS

Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc.

Semi-automatic sawing cycle with workpiece clamping-sawing-frame lifting to preset height after completed cut.
Infinitely variable hydraulic cutting pressure and feed rate monitoring at the saw band guide. This ensures optimal conditions for every sawing task, i.e. constant pressure when cutting solid material and constant feed for thin-walled profiles.
Particularly suitable for universal use with varying cross-sections, materials, and frequent miter cuts.
The machine control system complies with CE standard 89/289.

Technical data:
Round/flat
90°: 325/500 x 300
45°: 300/300 x 300
30°: 200/200 x 200

Rapid approach lowering of the saw frame to the material edge via push button.
Manual miter angle adjustment from 90° to 30°, steplessly adjustable via scale.
The miter pivot point is the intersection between the saw band and the fixed vise jaw, thus the cut length remains unchanged when changing angles.
Hydraulic full-stroke workpiece clamping – CETOP hydraulic system.
Material is clamped parallel at 90° at any frame angle.
Complete coolant system with electric submersible pump.
Centralized machine operation.
Saw band drive with end-of-travel switch.
Movable band guide arm, adjustable to material width.
Saw band pulleys with carbide guides.
Integrated chip cleaning brush.
Saw band tensioning with torque wrench.
Paint finish: silver-grey / blue-grey (RAL 7001 / RAL 7031).
Minimum remnant length: 25mm.
Cutting speed:
AC frequency-controlled drive, 15–150 m/min, steplessly adjustable via control panel.
Drive:
Saw band: 3.0 kW, 400V, 50Hz
Hydraulics: 1.1 kW
Gjdpfxjhppabj Adustt
Coolant pump: 0.1 kW
Saw frame feed:
Stepless up to 300 mm/min, hydraulically controlled.
Saw band tensioning: Mechanical with torque wrench.
Saw band dimensions: 4200 x 34 x 1.1 mm
Working height: 750 mm (without base elements)

Weight: 850 kg
Dimensions (LxWxH): 1300 x 2050 x 1400 mm

The following options are available:
Laser guide
Micro-spray device
Clamping pressure regulator
Support table on infeed side

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.