Portal freze makinesi

MECANUMERIC MECA EASY 1510

CNC Milling Machine, Milling and Engraving Machine, MECANUMERIC, MECA EASY 1510 – used - :

Ex-works price: €23,500 (net)!

Manufacturer: MECANUMERIC
Model: MECA EASY 1510
Year of manufacture: 2015, former DEMONSTRATION MACHINE

Three-axis milling machine in flat-bed gantry design.
Travel distances, X-, Y-, Z-axes: 1,050 / 1,550 / 200 mm.
Table frame with gantry: designed as a solid, stress-free, fully welded steel construction, powder-coated.
Heavy-duty table substructure for the VAC-CAISSON vacuum table, cassette design, air passage bores arranged in a 10 mm grid.
Traverse speed:
300 mm/sec (18 m/min) in rapid and feed motion!
Guidance on rails, linear bearings with recirculating ball guides.
Transmission: precision recirculating ball screws
Ball screws on all axes
Maintenance-free, brushless servo drive motors
(750 W on X and Y, 300 W on Z)
Repeatability: +/- 0.025 mm
Mechanical resolution: 0.0006 mm
CNC control: Mecanumeric CN 7000 ISO-G-Code
Machine operation via 10" touch screen display
Complete design and CE Declaration of Conformity according to essential safety and health requirements
Itsdpfx Apszbybisyjh

Vacuum table 1,020 x 1,500 mm
Support-work table constructed as a closed aluminum plate, with air passage bores arranged in a 10 mm grid over its surface.
The table is divided into two main zones, which can be manually switched on.
Vacuum generation by one (1) two-stage high-performance side channel blower. Motor power 4.5 kW, suction capacity 320 m³/h, filter and silencer included.
Due to total system size and possible heat development, the pump is installed outside the machine enclosure. The electrical control elements and fuses for pump and valves are integrated in the control cabinet or on the operator panel.

Milling spindle
HF40-ATC24
ENC
Conversion
Module
APSG-A
Vacuum generation by one (1) two-stage high-performance side channel blower. Motor power 4.5 kW, suction capacity 320 m³/h, filter and silencer included.
Due to total system size and possible heat development, the pump is installed outside the machine enclosure. The electrical control elements and fuses for pump and valves are integrated in the control cabinet or on the operator panel.
High-frequency motor spindle 4 kW
Power: 4 kW
Speed range: up to 24,000 rpm
Rapid tool change with pneumatic ejection, ISO30 taper.
Tool clamping diameter: 2–16 mm.
Cooling via compressed air, 6 bar, 20 m³/h
Includes inverter and switchgear in position.
Machine safety enclosure
Front side with door and safety lock
- PROTCHOC position omitted -
Preparation of electrical control and switching elements, and output socket for a heavy-duty industrial vacuum.
Tool changer
CH 6 S

Condition: good
Available: immediately
Location: Delmenhorst

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.