Plazma kesme makinesi

Microstep Mastercut Eco Plus 3001.15

Microstep Mastercut Eco Plus 3001.15,
Year of manufacture: 2017,
Control: IMSNC,
Oxyfuel cutting table: 3000 x 1500 mm,
Extraction channel left / right,
Plasma source: Kjellberg HiFocus 161i,
Adjustable 10 - 160 A,

Power Source HiFocus 161i PLUS
• Flexible adjustment of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control
• Optimal process control with ultra-fast cutting current regulation
• Monitoring of process through torch cooling, ignition time, pilot arc time, short-circuit time for torch ignition and power source
• Indication of operating states and error messages via LED and display
• Analog and serial interface for connection to CNC controllers
• Infinitely variable cutting current adjustment from 10 - 160 A and for marking from 5 - 25 A
• Optimum piercing with stepless delay time for the main arc and adjustable current ramp-up
• Adjustable current reduction for cornering, start, and end signals of the guiding system
• Automatic display of preset cutting current
• Serial data transfer for PC diagnostics

Plasma Cutting Technology: Contour Cut
• Further development of HiFocus technology for mild steel
• Optimized for cutting fine internal and external contours
• High cut quality and contour accuracy
• Holes with angular deviation according to DIN EN ISO 9013 in range 2-4
• Low angle deviations and smooth cut surfaces
• Excellent repeatability and dimensional accuracy
• No time-consuming rework – high productivity and low costs
• No additional equipment, software, or new consumables required
• Standard equipment as default

Iajdpfx Ajy Nd Hyebzow
Plasma Torch PerCut 200/210
• PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting
• Quick-change torch PerCut 210 with threaded lock for fast and convenient setup
• Special torches available for special applications
• Higher cutting speeds reduce cost per meter
• Long lifetime of consumables saves resources
• Narrower kerf results in less emissions and waste
• Significantly lower gas consumption than competitors thanks to effective liquid cooling up to the nozzle tip
• Reduced gas consumption also means lower noise levels
• Bevel cutting up to 50 degrees with standard consumables
• Cutting and marking with the same consumables

Power Source HiFocus 161i
Power supply: 400 V; 3 phase; 50 Hz
Max. connected load: 28 kVA (100% duty cycle)
Main fuse (slow): 50 A
Protection class: IP 22
Open-circuit voltage: 330 V
Cutting current: 10 – 160 A (100% duty cycle)
Marking current: 5 – 25 A (100% duty cycle)
Cutting range:
Max. 50 mm
typically 0.5 – 38 mm recommended
Max. piercing thickness: 30 mm
Weight: 206 kg

PerCut 200 plasma machine torch
PerCut 210 quick-change torch
Clamping diameter: 50.8 mm
Plasma gases: O2, N2, Ar/H2
Marking gases: Ar
Swirl gases: O2, N2, air, N2/H2 (F5)

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.