Vakum Pres MSM VPS 3514 Profesyonel

MSM VPS 3514 Professionel

New machine

Year of manufacture: 2026

The space-saving, tiltable vacuum press with a pressing area of 3500 mm x 1420 mm.

Technical basic equipment of the vacuum press:

Unless otherwise agreed, the vacuum press is powder-coated in the colors RAL 7012 and RAL 7035. Special colors are available upon request; this must be clarified in advance and may incur additional costs.

Welded table construction for professional use, mounted pivotably on a mobile carriage, equipped with 4 swivel castors, surface load capacity 150 kg. When not in use, the machine can be pivoted and locked in a space-saving position, reducing the required installation depth to 800 mm. The table surface consists of a 22 mm thick laminated MDF board, fitted with a slotted MDF vacuum distributor plate in the pressing area.

The membrane frame is supported by 2 gas pressure springs mounted on the sides of the machine. A 2 mm thick natural rubber membrane with 780% elongation and resistance to temperatures up to 70 °C is installed, fixed via a clamping system for quick membrane changes. The perimeter seal of the pressing chamber is ensured by a sealing profile in the membrane frame.

Oil-lubricated vacuum pump with a suction capacity of 40 m³/h and two vacuum tanks offering a total capacity of 200 liters. Evacuation and ventilation of the pressing chamber are controlled via a 3-way ball valve located at the front of the machine.
Ledjywpt Iopfx Adpjhd

The machine is delivered pre-assembled on a pallet. Please note that a forklift with sufficient lifting capacity and fork length is required for unloading.

Optionally, initial setup and a brief operating instruction by one of our technicians can be booked. We are happy to provide you with a separate offer if this service is required.

Summary of key data:

- Welded frame construction
- Highly flexible natural rubber membrane, thickness: 2 mm, elongation: 780%, very high reset capability, suitable for temperatures up to 70 °C
- MDF vacuum distributor plate
- Digital vacuum control VAK-CONTROL 1 with automatic shut-off
- Vacuum pump: 40 m³/h oil-lubricated
- Max. negative pressure: -0.99 bar
- Max. pressing pressure up to 9.9 t/m²
- Connected load: 1.40 kW (400 volts)
- Vacuum tank: 200 liters
- 4 swivel castors with locking device
- Additional 13 mm vacuum connection
- Pressing area: 3500 x 1420 mm
- Table height to vacuum distributor plate: approx. 895 mm
- Machine height closed: approx. 960 mm
- Machine height closed with cover plate: approx. 1030 mm
- Footprint, ready for use: 3790 x 1700 x 2150 mm (LxWxH)
- Footprint, pivoted: 3790 x 800 x 1750 mm (LxWxH)

Customs tariff number: 84659400
Net weight: 570 kg
Gross weight: 660 kg

Availability: April/May 2026
Stock location: Flörsheim

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.