Paper machine production line with stock

PAMA / Voith / Valmet / Goebel PM 5 + Stock Preparation/Deinking Plant

PM 5 Paper Machine + Stock Preparation / Deinking Plant and Goebel U16M
An integrated paper production installation in Hainsberg, Germany, is offered for sale. The PM 5 paper machine and its stock preparation/deinking plant are offered together. The Goebel U16M roll slitter rewinder is available separately.
PM 5 was built in 1985 and modernised several times. Its main sections include the PAMA approach-flow system and Fourdrinier section; Voith headbox and SpeedFlow system; Valmet top-wire former; and PAMA press, dryer and after-dryer sections, calender and Pope reel.
Reported modernisations: Valmet top-wire former (1994); approach-flow system expansion and modernisation (2002–2003); MAP quality-control system (2006); Voith SpeedFlow (2009); automatic tail cutter (2025).
PM 5 specifications
- Working width: approx. 2,730 mm; trimmed width: approx. 2,640 mm
- Maximum speed: up to 600 m/min
- Maximum gross capacity: approx. 150 tonnes/day
- Basis-weight range: approx. 45–130 g/m²
- Grades produced include office, copy, writing, printing, envelope and newsprint papers
- Installed electrical power: approx. 2.5 MW
- Steam consumption: up to approx. 16 tonnes/hour
Stock preparation / deinking plant
- Normal capacity: approx. 125 tonnes/day; up to approx. 140 tonnes/day under suitable raw-material and process conditions
- Essential components listed in the available technical documentation are reported to remain installed on site
- Older Siemens S5 and Teleperm control and automation system
Goebel U16M
Built in 2005, machine no. 053-9031.
- Working width: 2,800 mm
- Maximum speed: 2,000 m/min
- Maximum unwind diameter: 2,000 mm
- Maximum rewind diameter: 1,500 mm
- Minimum cutting width: 150 mm
Blsdjz Hvmhspfx Al Ijp
- Available accessories include winding shafts and an edge-trim extraction system with shredder and flat turbo disintegrator
Operating status and sale terms
Production stopped on 23 January 2026. According to the seller, PM 5 and the stock preparation/deinking plant were operating until the controlled shutdown. The Goebel U16M was also reported operational until that date, with no significant functional faults.
Asking prices:
- PM 5 and deinking plant: €2,200,000
- Goebel U16M: €250,000, offered separately