Lazer kesim makinesi

Prima Power CV 5000

Durumu: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 micrometers Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half-angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulse Operation – Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Ledpfxjywwrfj Adpehd Alignment Stability: +/- 150 µrad Operating Conditions: • Maximum ambient temperature: 40°C • Minimum ambient temperature: 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output power: < 1 mW — 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Cooling medium: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 microns Gas: • Type / Purity / Gas mix / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter usage