Surfinisher / Titreşimli yüzey işleme tesisi

Rösler RMSF-4/800 / R 12/6 SM-E / Z1000

The system is a complete Surfinisher installation including extraction station, fine particle screening station, complete water treatment system, and Rösler water tank.

The deburring performance with a 20-second immersion time corresponds approximately to the same performance as 10–15 minutes in a conventional vibratory finishing machine.

Rotating Work Container RMSF 4/800:
- 1 pc. round work container, plastic
- Working container diameter: 850 mm
- Working container depth: 500 mm
- 1 pc. quick coupling for easy container change
- 1 pc. drive motor, 7.5 kW
- 1 pc. dosing device D1-K/320 SF (recirculating water) with stand
- 1 pc. stand for feeds into the work container
- 1 pc. flow control (with flow monitor)

Fine Particle Screening:
- 1 pc. grinding media recirculation system
- 1 pc. base frame, stable welded construction
- 1 pc. balancer for weight compensation (media + hose + nozzle), incl. mounting frame
- Suspension for hose on base frame
- 1 pc. vacuum generator for creating negative pressure
- Connection of pipeline system to the transfer device of the finishing machine
- Suction hose with nozzle, approx. 5 m length
- 1 pc. 500-liter collecting container as cyclone separator
- For receiving process media extracted from the work container
- For transferring process media to the screening machine
- incl. automatic shut-off valve and hose for returning process media to the screening machine
- 1 pc. spray nozzle for flushing the collecting container
- 1 pc. two-hand control for the flap
Nodpfxsyngitj Agfeku
- 1 pc. dosing device DZ1-K

Rösler Screening Machine R 12/6 SM-E
- for fine particle screening
- Total length: 1,400 mm
- Total width: 1,160 mm
- Screen area: 1,200 x 600 mm
- Discharge height: 1,065 mm
- Step in the separation zone: 1 x 40 mm
- Drive capacity vibratory motors: 2 x 0.525 kW
- Vibratory motors positioned laterally
- Motor speed: 1,500 rpm
- Operating voltage: 400 V, 50 Hz, 3 Ph N/PE

Rösler Centrifuge Z 1000 ASS-II-Turbo with Automatic Sludge Discharge
Comprising:
Centrifuge Z 1000
* Centrifuge rotor made from aluminum alloy
* Speed: 2,050 rpm
* Reduced peeling speed via frequency converter
* Automatic retractable peeling knife
* Sludge capacity per peeling cycle: up to 25 kg
* Automatic residual water discharge
* Long bearing life due to re-lubricatable special bearings
* Electronic vibration monitoring
* Automatic rotor flushing

Equipment
- 1 pc. sludge trolley RSKM 30
- 1 pc. combined wastewater and recirculating tank 700/700 liters
- 1 pc. flocculant dosing pump DP2
- 1 pc. automatic post-dosing DZ-4/320
- 2 pcs. suction lances (level monitoring)
- 1 pc. noise reduction package approx. 80 dB(A)
- 1 pc. cooling unit RK 3
- 1 pc. titration kit for manual compound measurement

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.