Broşlama makinesi

Rausch RS 4 / 1000

Manufacturer: Rausch (Haan/ Rhld)
Model: RS 4/1000 Machine No.: 5027
Year of manufacture: 2001/2023 Weight: 580kg
Overhaul: 3/2023 by Wiemers AG

General / Technical Data:
Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current CE marking
Pulling force: 40 kN (4,000kg)
Broaching speeds: 3 m/min and 6 m/min
Return speed: 6 m/min
Maximum stroke: 1,000 mm
Maximum tool length: 1,200 mm
Table size / working area: 540 x 340 mm / 450 x 250 mm
Table opening: Ø 90 mm for standard broaching mandrels
Workpiece diameter: unlimited
Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash guard enclosure)
Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz

Accessories / Special equipment:
- Two-speed drive
- Safety door with interlock and chip chute
- Chip chute with tool tray
- Electrical monitoring of clamping jaws (tool removal monitoring to prevent unintentional retraction of the pull bridge)
- Integrated coolant system with solenoid valve (operated via swivel system)
- Patented coolant/lubricant swivel system
- Externally adjustable tool length setting system (interchangeable between machines)
- Four centralized lubrication points for the trapezoidal spindle drive
- Closed centering plate for profile tools with an additional guard plate for flat broaching tools (keyway tools)
- Three-sided closed splash guard enclosure with tool tray (ideal for profile broaching)
- External control panel (connected via Harting plug connector)

Remarks:
The machine has been completely overhauled, and the machine body has been fully reconditioned. The following wear parts have been replaced:
- New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze
- All bearings and seals replaced
The coolant system (pump, check valve, and drain tap), including coolant/lubricant swivel system, is new
- Coolant supply is controlled by a solenoid valve, which can be operated via the swivel system
- The pull bridge as well as the clamping jaws and gear racks are new
- A switchable clamping jaw monitoring system has been installed (added safety for operator & tool breakage)
- A safety door with interlock, signal light, and door lock
- The tool length setting system has been relocated outside the machine compartment
- Additional end position limit switches installed
- Complete electrical system (control cabinet) is new
- No PLC installed, the machine is electrically easy to service
- New drive motor (SEW Germany) with brake
- The machine has been newly painted with a two-component structural lacquer

General:
The dual spindle drive ensures a smooth and centralized pull point as well as a constant broaching speed (broaching speed selectable at either 3 m/min or 6 m/min).
The machine is, by design, quick and easy to set up for broaching with flat broaching tools for keyway production.
Due to the universally-constructed pull bridge and machine table, broaching can be carried out with both profile and flat broaching tools without the need for additional pull heads.
Hfedpfew H Dgnox Ag Nob

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.