Briket Presi Schuko Compacto CT 700 S-20 2017

Schuko Compacto CT 700 S-20

Durumu: kullanılmış, Üretim yılı: 2009, Briketleme presi, hazneli, 7,5 kW motorlu Briket çapı: 50 mm Verim: 80 - 100 kg/saat Ağırlık: yaklaşık 870 kg Yağ kapasitesi: 100 litre, yağ ısıtıcılı Karıştırıcı ve helezonlu boşaltım sistemli Seviye sensörlü Bwsdpfxox Twb So Afmsh Otomatik başlatma özelliği Hazne boyutları: 1500 x 1500 x 900 mm Toplam boyutlar: 2300 x 1800 x 1200 mm Çalışma saati: 3370 saat Stok yeri: Nattheim

Durumu: kullanılmış, Üretim yılı: 2019, Used machine Equivalent to Weima C 150 Year of manufacture: 2019 1,845 operating hours Features and technical data: Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil capacity: 160 l Throughput capacity: up to 50 kg/h (material-dependent) Connected load: 400 V +/- 5% / 50 Hz Bjdsw Rhk Djpfx Afmowh Includes: - Press mechanism with filling cylinder, main cylinder, clamping cylinder - Connection part for conveying line - Chrome-plated clamp - 160 l hydraulic tank with pump motor and valve control - Safety switch for oil temperature - Control cabinet and electrical control system - Briquette length monitoring - Automatic end-of-stroke for all cylinders - Manual control - Automatic on/off via fill level end switch Material: Wood shavings, sawdust from solid wood, loose, clean and free from foreign matter Dimensions: max. 10 mm Annual throughput: approx. 50 m³/year * Foreign matter specification: Anything other than wood, or wood pieces larger than 15 mm. Throughput figures are average values and highly dependent on material—mixture ratio, moisture, and material properties. Application case unknown or not fully specified. Machine is sold appropriately and solution-oriented by a specialist dealer. Equipped with oil cooler or water cooling—adequate supply and exhaust ventilation for the press/unit/oil cooler must be ensured. In the case of heat buildup, runtime may decrease significantly depending on temperature. Supplied with new pressing clamp Availability: by arrangement Location: Flörsheim

Durumu: iyi (kullanılmış), Üretim yılı: 1990, hala iyi durumda briket presi Hidrolik motor 5,5 kW Altta talaş haznesi 120 x 120 cm yamuk üst yapı ile (üstte 2 m), 85 cm yüksekliğinde talep üzerine filtre ataçmanı da mevcut (ek ücret karşılığında) tahtadan daha küçük bir üst yapı da yapılabilir Bodpsxdlhrefx Afmjwh