Tabla freze makinesi

SCM class tf 130

SCM TF130 CLASS Spindle Moulder
Used machine
Year: 2014

Specifications:
- Manual adjustment for the lifting of the spindle shaft with a digital readout for setting working height
- Adjustable spindle fence with wooden tables, extraction hood, and wood table extension, maximum tool diameter Ø250 mm
- Spindle speeds: 3000/4500/6000/7000/10000 rpm
- Electronic display of selected speed
- Electrical provision for power feed unit
Gbjdpfoy R Tw Dsx Ahkjl
- Reversible spindle rotation direction with electric interlock for start-up safety
- Automatic star-delta start
- Motor power [S6 -40%]: 7kW / 9.5 HP / 50Hz
- Protection device for shaft operations (maximum tool Ø160 mm)
- Emergency stop button
- Safety microswitches for shaft locking
- Safety microswitch on motor access door
- Lockable main switch
- Thermal-magnetic protection
- Transformer for auxiliary circuit 110V
- Automatic motor brake on main motor
- CE conformity certificate

Technical data:
- Table dimensions: 1200x730 mm
- Usable spindle length CE Ø30/35(40/50): 140(180) mm
- Spindle base protrusion above table: 52 mm
- Spindle base protrusion above table with interchangeable spindle: 92 mm
- Maximum retractable tool diameter below table with ring table: 320x85 mm (with Fast sector table = 300x85 mm)
- Spindle fence travel with mechanical programming: 125 mm (positioning from -125 to +125 mm from spindle axis with MK5 spindle)
- Outer diameter of extraction port on spindle hood: 120 mm
- Outer diameter of extraction ports on frame (specific for forced air cooling of electrospindle): 120 mm
- Extraction system air speed: 20 m/s
- Extraction system air consumption: 1700 m³/h

Machine options:
- Bar fence
- "TL" version for tenoning and profiling (C.E.) with manually fed tenoning carriage
- Excentric clamp
- Tilting telescopic fence with 4 reference stops for length programming
- 1 anti-splintering device on the fence with reference stop
- 1 complete entry table extension with adjustable front support bar for large workpieces
- Tenoning hood with extraction:
- Quick tool change, max tool diameter 300 mm
- For spindle Ø30 to 35 mm, max tool diameter 300 mm
- For spindle Ø40 to 50 mm, max tool diameter 350 mm
- Emergency stop button
- Operator protection arm
- Microswitches for control and speed restriction to 3000/4500 rpm during tenoning operations
Note:
- Only available in a machine configuration compliant with CE standards
- Only available with mechanically adjustable spindle fence or alternatively the "Flex" spindle fence
- A minimum main motor power of 7 kW is required.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.