CNC işleme merkezi

SCM Record 210 NT

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2008, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: A3347169, CNC machine SCM, Record 100 AL Action Line, 5-axis woodworking line, 400V, year of manufacture 16/07/2008, electrical cabinet, safety mat control, partition wall, working area 305 x 122 cm, total machine dimensions: approximately 565 x 250 x 260 cm, to be dismantled by buyer. 1 large vacuum with white plate details and 1 small vacuum: Year: 2019 / N°A3347169 Type: VTLF2.250/0-79 Frequency: 50/50Hz Njdpfx Acoxg El Aeujcl Speed: 950/1150min-1 Power requirement: 5.5/6.4kW Inlet capacity: 244/286m³/h Max vacuum: 200/200mbar

Durumu: kullanılmış, Üretim yılı: 2015, Fonksiyonellik: tamamen fonksiyonel, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing of straight edges using coil material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness: 10-60 mm Workpiece thickness with MFU aggregate (depending on profile): 10-35/60 mm Edge height: 14-64 mm Edge thickness (coil material): 0.4-3 mm Edge thickness (strip material)*: 0.4-10 (12) mm Workpiece overhang: 25 mm Minimum panel length: 140 mm Minimum width (with 140 mm length): 85 mm Minimum width (with 250 mm length): 50 mm Feed speed: 12 m/min Extraction*: 8x connection Ø100 mm Compressed air connection: 7 bar Glue pot capacity: approx. 2 kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies hot-melt adhesive to the workpiece, feeds the edge tape to the workpiece, automatically cuts the tape from the coil, and presses it onto the workpiece, ensuring perfect positioning. - END CUTTING UNIT IN-801 For trimming the front and rear excess edge with a 0° to 15° inclination. - DOUBLE-MOTOR MULTIFUNCTIONAL PROFILE SHAPING UNIT AR02 E For corner rounding and profiling workpiece edges made of synthetic material up to a maximum thickness of 3 mm. - JOINTING MILLING UNIT RT02 Pre-mills the workpiece before glue application. Includes two 1.8 kW high-frequency motors at 12,000 rpm. - SCRAPING UNIT RB02 For post-processing of thick PVC/ABS edges. - FLAT SCRAPING UNIT RC02 Unit for removing excess glue at the joint area between edge and panel. Equipped with tracing rollers and a flat knife with operation control. - BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge with fabric polishing discs. The unit automatically adjusts to the workpiece thickness. - ANTI-ADHESIVE SPRAYING DEVICE ADZ02 Precise application of anti-adhesive agent thanks to injectors activated by numerical control. - KIT PRO-GLUE The PRO-GLUE kit consists of the following components: • TEKNO-GLUE system for optimal edge bonding through: - Controlled sensing of the glue roller Ncodpexzb Iiefx Acuol - Automatic retraction when feed stops - Automatic ON/OFF of the gluing section • REVERSE system to switch the glue roller between co-rotating and counter-rotating operation Electrical and mechanical preparations for use of special glue pots for POLYURETHANE glue on machines in EVA configuration. NC axis for the fine trimming unit Kit for automatic adjustment of tracing rollers and tools according to edge type and thickness. Adjustment via the control system. Pair of multi-profile cutters for the fine trimmer: 25-degree bevel milling, R=2 mm + R=1 mm, and straight profile for solid wood. NC axis for the profile shaping unit Kit for automatic adjustment of the tracer according to edge thickness. Adjustment via the control system. Function for corner processing only. NC axis for the scraping unit Kit for automatic adjustment of tracing rollers and tools according to edge type and thickness. Adjustment via the control system.