Briketleme presli ekstraksiyon sistemi

Spänex C1 SMU 100 BA SHB 70 RS

Executed in accordance with FprEN 16770. Tested according to GS-HO-07 test principles of the BGHM. Offline filter cleaning with automatic fire extinguishing system. The dust extractor is a suction and filtration unit for commercial use, intended for installation within the workspace. The dust extractor is suitable for capturing and conveying dry wood, paper, or plastic chips and dust from individual or multiple processing machines. Delivery is in fully assembled, ready-to-operate condition.

Consisting of:
- Housing designed to withstand negative and positive pressure over 200 mbar
- Suction nozzle with non-return flap
- Antistatic filter elements
- Jet-pulse cleaning system
- High-performance radial fan arranged on the clean air side with three-phase motor, energy efficiency class IE3
- Exhaust silencer and air outlet grille
- Control system with CEE device connector (phase inverter)
- Automatic start control for up to 6 machines (activation via current coils or potential-free contacts possible)
- Automatic filter cleaning with run-time addition
- Integrated fire extinguishing system
- Paint finish RAL 9006

For cleaning, the customer must supply prepared compressed air to the unit (connection via plug nipple NW7, 6 bar required). For the fire extinguishing system, a water line must be provided on-site (connection via ½" screw fitting, min. 0.5 bar).

Dust Extractor Technical Data:
Suction nozzle diameter: 355 mm
Residual dust content: < 0.1 mg/m³ (H3)
Filter area: 26 m²
Cleaning: Jet-pulse automatic with run-time addition – offline
Airflow: 10,000 m³/h, Design for standard application
Pgsdpfx Ajyfp Sroa Asg
Nominal airflow: 7,130 m³/h at 20 m/s at suction nozzle
Negative pressure: 3,000 Pa at suction nozzle at nominal airflow
Sound pressure level: 72 dB(A) at 1 m distance from the unit
Motor power: 15.0 kW
Motor data: 400 V / 50 Hz / 3000 rpm / IP 54
Dimensions (L x W x H): 3,500 x 900 x 2,400 mm
Weight: 1,020 kg

SPÄNEX briquetting press type SHB 70 RS €15,000.00
Transport pipe 110 x 3.2 mm for SHB 70 RS
Briquetting press serial number: 2570/2018
Intermediate hopper 1.2 m³ for attachment to the SMU 100 dust extractor, integrated rotary valve discharge with geared motor, opening for connection of a briquetting press or rotary valve, galvanized version

For stepless adjustment of fan performance to the actual demand through variable speed adjustment of the fan drive. The frequency converter increases plant efficiency, saves energy, and reduces material and machine wear.
- Motor power 15 kW
- Integrated PID controller
- Automatic energy optimization for maximum motor efficiency even in partial load
- Integrated manual/automatic switching
- Commissioning menu for quick parameter configuration
- Integrated radio interference suppression filter to EN 55011 - 1 B
- Synchronization with already running motors
- Device design IP 55

Pressure gauge 1 pc for controlling the frequency converter and thus power consumption, depending on the open machine gates, incl. connection hose to the piping

Extractor switchgear expansion SMU BA 1 pc comprising:
- Slide gate control for up to 16 machines
- 14 current coils
- Multi-tone horn with flashing beacon

Rotary paddle bulk material level indicator 1 pc in the intermediate hopper of the dust extractor
Marking: ATEX II 1/2 Ex tD A20/21 for indicating the maximum fill level and for control of a conveyor system (system-specific)

Stored at: Supplier

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.