Dikey işleme merkezi

Starrag HEC 400 F

For sale is a Starrag HEC 400 F 4-axis machining center, which was fully inspected and overhauled at the Starrag plant in 2022. All relevant components were checked and, if necessary, adjusted or replaced during the process. Since its installation in 2022, the machine has been in use at our facility and is currently under power in ongoing production. It is in well-maintained technical condition and has been serviced regularly.

Technical Highlights
- Starrag HEC 400 F – 17211, 4-axis machining center for milling / drilling / turning
- Control: Siemens Sinumerik 840 D solution Line with NCU710 and PLC integration
- Spindle: HSK-A63 motor spindle, speed range 50 – 18,000 rpm,
Torque 130 Nm (25% duty cycle), power 32.4 kW / 24 kW (100% duty cycle)
- Factory inspection in Chemnitz 2022: All assemblies checked, adjusted, and replaced as needed
- Direct-drive NC rotary table, 80 rpm, 400 Nm drive torque, 3,000 Nm tangential torque
- Siemens spindle diagnostics & remote diagnostics (Teamviewer)
- Energy-efficient system with power regeneration and stand-by mode for energy savings

Working Area & Dimensions
- Travels (X/Y/Z): 650 / 650 / 680 mm
Hpjdjx H Idkjpfx Afzsa
- Pallet size: 400 × 500 mm with 57 × M12 threads
- Max. workpiece height: 850 mm • Max. load per pallet: 500 kg
- Pallet changer: 2 pallets – automatic, changeover time approx. 8 s
- Tool magazine: 60 tool stations (chain magazine) • Chip-to-chip time 3 – 4 s
- Chip conveyor: scraper belt conveyor with vacuum slotted screen, discharge height 1,050 mm
- Machine dimensions (L × W × H): approx. 5,150 × 2,800 × 3,025 mm
- Machine weight: approx. 11,500 kg
- Noise emission: ≤ 80 dB(A) according to EN ISO 3744

Additional Equipment
- Clamping hydraulics, 6-channel (90 bar) at setup and workstation
- Increased spindle torque (130 Nm) for high-performance machining
- Torque support with axial supports
- Coolant system: connection to central supply incl. return and temperature compensation
- Increased coolant pressure up to 80 bar through the spindle center
- Optical measuring probe Renishaw OMP60 incl. Siemens measuring cycles
- Tool breakage monitoring (mechanical, concurrent with main time)
- Sequential pallet operation + crane infeed/outfeed (software)
- Signal light (4-color) for machine status
- Work area/machine equipment: flood shower, rinsing gun, vortex nozzle, exhaust interface, foot switch air nozzle
- Documentation: fully digital (PDF)

Operating Hours / Service Life
- Power-on hours approx. 27,412 h (as of Oct 2025)
The counter runs whenever the machine is switched on – including during setup, maintenance, or downtime.
- Spindle operating hours 9,956 h total
Special Features
- OPTIONAL: With perfect postprocessor and CAM software TOP Solid (at extra cost)
- Under power – demonstration possible at any time
- Direct from production – no dealer sale
- Complete technical documentation available
- Support for dismantling, loading, and transport available (at extra cost)

The tool holders and vise visible in the photos are not included in the scope of the offer, but can be purchased separately upon request.

Price €140,000 net, negotiable for quick handling.

All information has been provided to the best of our knowledge and belief. Subject to change, errors, and prior sale.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.