Yürüyen tabanlı yarı römork

STAS 13.50 "WF 87 "FarmStar" GH 3,85m GMP-HCCP

Chassis
Manufactured in a self-supporting aluminum (ALU) construction with corresponding reinforcements in the lower flange for particularly high stability and strength. Aggregate chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons)

Axles and Suspension "Disc Brake 22.5"
Jost axle assemblies, 3 x 9 tons with DC air suspension, WABCO Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axles separately liftable with starting aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension

Tyres and Wheels
6 wheels with tires size 385/65 R 22.5 as per manufacturer selection, on Alcoa aluminum rims, satin finish, 11.75x22.5 ET120

Landing Gear
Aluminum drop-leg landing gears, manufacturer: Alu Leg, with 2x10 tons load capacity; for air suspension, swinging feet are used

Brake System
According to E.C. standards, two-line brake system, WABCO EBS E system with RSS (Roll Stability Support), spring-actuated brake system acting on two axles, operated from the rear, aluminum air reservoir system, premium modulator

Electrical System
According to StVZO regulations with 2 LED five-chamber tail lights type Aspöck Europoint III integrated in aluminum rear, 24 volt system with 1x 15-pin and 2x 7-pin sockets, with side LED marker lights, 2 separate LED work lights at the rear, 2 LED work lights laterally at landing gear height, 1 LED interior work light front left, operable from outside

Body / Tipper Body "Body fully welded inside"
Front wall load 17,250 daN, rear and side walls 10,250/13,400 daN. Aluminum tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm) fully welded, 600 mm wide with lower and upper flange, plank profiles fully welded inside!!, floor as moving floor system mounted on 140 mm ALU cross members, cross members closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile 2-3 mm thick in straight execution, special ALU corner profiles in chamfered design, smooth rear wall in straight execution with 2 ALU double wing doors, 50/30 mm thick, with 4 locking rods secured in welded ALU rear frame with PTFE and stainless steel bearings, retractable ALU wall suspended in reinforced ALU upper flange with "Kevlar cover" for complete emptying, side brush seals, additional Kevlar cover, integrated grain funnel with cover plate, operable from outside with inspection window rear left, 2 sampling slides in the rear doors

Hydraulic System "Cargo Floor" 24 board system
Moving floor system with hydraulically actuated ALU profiles on ALU square tubes, with approx. 880 PE-HD sliding blocks, floor approx. 6 mm smooth, hydraulic stroke approx. 200 mm, fixed halves on the front wall, separate connection possibility for hydraulic lines under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190 to max. 240 bar, aluminum end pieces welded into the floor, operation rear left with radio control in a lockable waterproof box, without hydraulic hoses
Codpfx Ajxuy I Ijd Njhd

Accessories
PVC mudguards with rubber mud flaps, ALU spare wheel holder, side ALU underride protection in foldable design, 1 toolbox approx. 800x460x430 mm plastic, approx. 3.7m ALU ladder, tarpaulin 680g/m2 quality with tarpaulin system incl. side quick release with cover bar and tension strap on the front wall, catwalk on the front wall with double access, 3 swiveling ALU bows 70 mm thick, 150 mm raised, w

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.