Yürüyen tabanlı yarı römork

STAS bioSTAR ca 100 cbm 14,9 m Innenlänge

bioSTAR approx. 100 cbm, 14.9 m internal length

Silver-grey
BIOSTAR – STEERING AXLE – V14900 – VERTICAL FRONT WALL – VERTICAL REAR DOOR

Internal body length: approx. 14,900 mm
Internal body width: 2,475 mm
Body volume: approx. 90 cbm
Gross vehicle weight (GVW): 36 t
Axle spacing: 1,310 mm
Unladen weight: 8,500 kg
Fifth wheel height: 1,150 mm

TECHNICAL DESCRIPTION
1. CHASSIS
FIFTH WHEEL HEIGHT: Accurate fifth wheel height is 1,150 mm.

AXLES Tridem: Brand: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: large disc Offset: ET 120 BVA: with
The first axle is an automatic lift axle controlled via the EBS-E system. The third axle is a self-steering trailing axle. CONNECTION
BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected.
LIFT AXLE FUNCTION: No lift axle. With traction aid.

TRACTION AID: The traction aid is activated by pressing a button in the truck (truck equipment not included).

AIR SUSPENSION: Lifting and lowering equipment. Aluminium air tank.
STEERING AXLE LOCK: The self-steering trailing axle is locked as follows:
– via the reversing lights
– via a button in the truck (truck equipment not included)

TYRES: 6 x 385/65 R 22.5 regional transport tyres (manufacturer’s choice) on ALCOA MATT aluminium rims. ET 120.
Ibjdpfxoxplxzs Ab Nec

BRAKING SYSTEM – EBS: WABCO EBS-E 2S/2M system – PREMIUM MODULATOR
2-line compressed air braking system according to CE guidelines. Spring-loaded parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System)

LIGHTING – ASPÖCK 24 Volt electrical system. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED side marker lighting mounted to the trailer. Without rear junction box – NORDIC.
REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is mounted in the fixed aluminium under-run guard. With foldable aluminium lighting guard. 2 x 1 five-chamber rear lights – EUROPOINT III – LED version.

HYDRAULIC CONNECTION: Connection at the front wall. With additional connection possibility below the body in front of the landing legs.

ACCESSORIES

REAR EXTENDABLE LADDER: Extendable ladder integrated at the rear of the vehicle, right side.

PNEUMATIC CENTRAL LOCKING: With pneumatic central locking.
TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm)
SPARE WHEEL HOLDER: Single aluminium spare wheel holder

2. BODY
FRONT WALL: The front wall is made of robust aluminium plank profiles.
INNER FRONT WALL TO FLOOR SEAL: Fixed seal between the floor and front wall using aluminium profile and PVC sealing.
SIDE WALLS: Side walls smooth inside and out. Double-wall profiles, 600 mm wide – 30 mm thick – 3 mm inside, 2 mm outside (grain version). The side wall profiles are welded continuously on the inside.

WEAR PLATE: Rectangular aluminium wear plate, inside rear, 2,000 (L) x 1,500 (H) x 4 mm.

MOVING FLOOR SYSTEM: Cargo Floor CF 500 SL-C E-control. 21-board floor system. Drive segment consisting of 3 double-acting hydraulic cylinders with a stroke of 200 mm. Rear closure plate made of stainless steel.

FLOOR SYSTEM CONTROL: E-control – Electric with radio remote control (original Cargo Floor). Load – stop – unload via switch. Manual emergency operation using unique red Cargo turn knob.

MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floorboards.
FLOORBOARDS: 21 aluminium floor boards – 8 mm ribbed with welded aluminium end caps.

REAR DOOR: 2 portal hinged...

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.