Kusur kesme tesisi

STROMAB WS.1

Cutting to fixed lengths according to cutting list and cropping of defects

Cutting Cycle:
Defect cropping by chalk marking
Cutting to fixed lengths,
Standard and sequential cutting,
Sequential cutting in marking mode.
Infeed material: variable lengths for single-piece loading

WS.1 Through-feed Cross-Cut Saw
4 pcs. lower feed rollers
1 pc. loading table 2 m, right side, with double marking table
1 pc. outfeed table 1 m with rear stop
Height of rollers adjusted manually
12 pcs. luminescent chalk

Cutting capacity:
Pos. A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm
Pos. B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm

Control system with:
7" colour touchscreen
Processing of cutting cycles directly on the machine
Programming options:
- Defect cropping by marking
- Operation with cutting list consisting of 10 dimensions, repeat option for each dimension and total quantity per dimension
100 memory slots for cutting lists
Recognition system for the last two pieces to be cut and the following piece
Electronic control of the sorting unit with No.1 ejection kicker (ejection kicker optional)

Blodox Da Tvepfx Acwor
Technical Features:
Feed system with brushless motor and toothed belt
Feed speed 100 m/min
Cutting accuracy +/- 0.8 mm
HW saw blade diameter 500 mm
Motor power 7.5 kW
Cutting cycles per minute up to No. 100
Minimum workpiece length 550 mm
Minimum workpiece width 40 mm
Minimum workpiece thickness 15 mm

On request:
ZA295 Additional loading table with double marking table
ZA110 Outfeed table
ZA058 HW saw blade Ø 500 mm
ZA296 Height of rollers motorized adjustable

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.