Silindirik taşlama makinesi - evrensel

STUDER S 30-1

Grinding diameter 250 mm
Grinding length 650 mm
Centre height 125 mm
Total power requirement 13 kW
Machine weight approx. 3,500 kg
STUDER (CH)
Hydraulic High-Precision Universal External & Internal Cylindrical Grinding Machine
Model S 30-1
Year of manufacture 2011 19-3956

Centre height / grinding diameter: 125 / 250 mm
Distance between centres / grinding length Z-axis: 700 / 650 mm
Workpiece weight between centres, flying: 130 kg
Table feed speed: 50 – 5,000 mm/min
Minimum automatic traverse: 1.5 mm
Reversal delay: 0 – 6 s
Table swiveling degree: °

Cross travel X-axis: 315 mm
Rapid traverse: 60 mm
Feed rate: 0.012 – 6 mm/min
Spark-out time: 0 – 6 s

Dksdpoxvdrtsfx Aatjw
Universal turret grinding headstock
Swivel range B-axis, manual: 0 – 180°
Grinding wheel size: bore x width x Ø: 127 x 63 x 400 mm
Maximum peripheral speed: 35 m/s
Internal grinding device for belt spindle Ø: 0 mm

Workpiece headstock with hydrodynamically mounted spindle
Mounting taper / spindle bore: MK 5 / 30 mm
Speeds: 60 / 175 / 270 / 600 rpm

Spindle drive: 5.5 kW
Total drive: kW - 400 V – 50 Hz
Weight approx.: 3,000 kg

Accessories / Special equipment:

• Conventional electrohydraulic control and drives with a wide control range and high resolution
• MAGNESCALE 2-axis digital readout for Z and X axes. X-axis (linear / diameter measurement)
• Fully automatic cycles for plunge grinding, longitudinal grinding, internal grinding with rapid traverse, roughing, finishing, fine finishing, spark-out (prepared for structure-borne sound sensor and a measuring control)
• Turret grinding headstock with B-axis, manually swiveling 0 – 180°, with external cylindrical grinding spindle on the left, 5.5 kW, and internal grinding spindle with oil mist lubrication Ø 0 mm, 40,000 rpm, 1.5 kW
• Workpiece headstock with hydrodynamically mounted spindle, swiveling 90°, sine bar, air lift-off
• Precision tailstock with preloaded quill and fine adjustment for cylindricity correction
• Machine bed made of GRANITAN S3 mineral casting for high rigidity and vibration damping
• Adjustable dressing device for the tailstock, foldable dressing device for the table, swiveling dressing device for the table
• Collet chuck device with many SCHAUBLIN precision collets Ø 1 – 25 mm
• Further extensive accessories such as 2 grinding wheel flanges, various internal grinding arbors, 2 face plates, balancing arbor, various centres and arbors, Morse taper sleeves, covers, auxiliary disc, various splash guards, large belt filter coolant system, etc.
Condition: Very good condition, only 7,515 operating hours! High-precision and universal machine!

Video:
Delivery: ex stock, FCA Metzingen
Payment: strictly net – after receipt of invoice

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.