Yatay işleme merkezi

SW Schwäbische Werkzeugmaschinen BAW06-22

Durumu: kullanılmış, Üretim yılı: 2007, Çift milli işleme merkezi 5 eksenli tasarım (her iki tarafta) Travers yolları x/ y/ z = 600/ 600(975) / 500 mm İğ sayısı 2 İş mili mesafesi 600 mm Hızlı travers 45 m/dak İş mili hızı 17.500 rpm'ye kadar Tahrik gücü 38 kW Takım magazini 2 x 72 takım pozisyonu HSK 63 takım tutucu Duodpotgu Ixjfx Admol CNC kontrol Siemens 840D 1 x alet kırılma kontrolü 2 x sıkıştırma köprüsü desteği H75 mm 2 x sıkıştırma köprüsü 5. eksen Knoll soğutma sıvısı sistemi, 70 bar 1 x talaş konveyörü KB1000 1 x matkap kafası indeksleme 2 x takım planlama sistemi kontrolü 2 x A/U ekseni torsiyon telafisi yükseltme kiti

Durumu: iyi (kullanılmış), Üretim yılı: 2020, çalışma saatleri: 22.000 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 2080594, X ekseni hareket mesafesi: 600 mm, Y ekseni hareket mesafesi: 600 mm, Z ekseni hareket mesafesi: 400 mm, iş mili çalışma saatleri: 9.500 h, Donanım: devir hızı sonsuz değişken, dokümantasyon / kılavuz, talaş konveyörü, CNC Control System SIEMENS 840D SL Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Mains type: TN-S or TN-C system Total connected load: 133 kVA Power factor: 0.6 Protection: 200 A gG (5 s) Weight Operational machine weight: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change: Pick-up system Tool management: Fixed coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors X/Y/Z axis measurement: Direct, absolute X Axes (X1 and X2) Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 2 × 10,000 N Continuous force: 2 × 5,000 N Positioning accuracy: Tp = 0.008 mm Y Axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z Axes (Z1 and Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle configuration: Horizontal, twin spindle side by side Motor spindles, liquid-cooled, synchronous drive Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear threshold: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Machining Area Spindle center distance: 600 mm Travel paths: - X axis: 600 mm - Y axis: 600 mm (optionally 875 mm) - Z axis: 500 mm Workpiece Clamping / Table System Pivoting mount with two separate swivel tables for mounting clamping bridges Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Maximum workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Positioning accuracy: ±5″ Tangential torque: 4,500 Nm Max. load moment: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s Duodpfjxt D Ezox Admol Note System is supplied without product-specific tools, fixtures, or robot grippers.

Üretim yılı: 2013, Durumu: mükemmel (kullanılmış), Toplam güç değeri: yaklaşık 133 kVA Yedek sigorta: 250A Basınçlı hava kalitesi ISO 85731'e göre: saflık sınıfı 4 Bağlantı basıncı: maks. 9,5 bar Çalışma basıncı: min. 7 bar İğ sayısı: 2 İş mili düzeni: dikey, yan yana İş mili mesafesi: 600 mm Maks. 12000 rpm'lik iş mili İş mili yatak çapı: 90 mm Rampa yukarı süresi: 0-10.000 min-1 yaklaşık 0,8 sn Dsdpfx Ajfkvvlodmeul Seyahat X ekseni: 600 mm Y ekseni hareketi (konum değiştirme): 600 (875) mm Seyahat Z1-,Z2-ekseni: 500 mm Takım değiştirme sistemi: Pick up Takım mili: HSK 80 Alet yerleri: 70 Maks. takım çapı alet çapı: 90 mm Maks. takım uzunluğu Takım uzunluğu: 540 mm Maks. Aletin maks. ağırlığı: 10 kg Maks. Şarjör yükü: 350 kg

Durumu: iyi (kullanılmış), Üretim yılı: 2014, çalışma saatleri: 48.000 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 2080233, X ekseni hareket mesafesi: 600 mm, Y ekseni hareket mesafesi: 600 mm, Z ekseni hareket mesafesi: 400 mm, Donanım: devir hızı sonsuz değişken, dokümantasyon / kılavuz, talaş konveyörü, CNC Control System: SIEMENS 840D Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (earthed) Network type: TN-S or TN-C system Total connected load: 133 kVA Power factor: 0.6 Circuit protection: 190 A gG (5 s) Weight Operational machine weight: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change: Pick-up system Tool management: Fixed coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Position feedback X/Y/Z: Direct, absolute X Axis Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Y Axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Dsdsxt D Ebepfx Admjul Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z Axes (Z1, Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, dual spindles side by side Motor spindles, liquid-cooled, synchronous technology Spindle diameter: 40 mm Tool holder: HSK-A63 Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Working Area Spindle distance: 600 mm Travel: X axis: 600 mm Y axis: 600 mm (optional 875 mm) Z axis: 500 mm Workpiece Clamping / Table System OP1: Swivel support with two separate swiveling tables for clamping bridges OP2: Double rotary carrier (Q axis) with two direct-drive NC rotary tables (A/U axes) Double-sided toothing on the swivel carrier Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Repeatability Ø 800 mm: < 0.008 mm Max. clamping device and workpiece diameter: Ø 675 mm × 1,430 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table rotation speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Indexing accuracy: ±5″ Tangential moment: 4,500 Nm Max. load torque: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s