Horizontal machining center

SW BA321

Technical specifications:
Cjdpexxrnbjfx Aazsri

# Working area: X 300 mm; Y 500 (725) mm; Z 375 mm
# Axis configuration: 3 LINEAR AXES (X, Y, Z) + 1 rotary axis (A – rotary table with indexing head)
- Direct angular measuring system with up to 50 rpm, accuracy +/- 5”
# Maximum workpiece clamping dimension/weight: Ø575 x 830 mm / max. 360 kg
# Rapid traverse: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm
# Spindle center distance: 300 mm
# Spindle speed: 1 – 17,500 rpm
# Spindle interface: DIN 69893-HSK-A63 (with internal coolant supply)
# Automatic tool changer: 2 x 32 tools; chip-to-chip average time: 2.5 sec
# Maximum tool dimensions: Ø75 mm / length: max. 275 mm / up to 7.5 kg

Electrical data:
# Mains voltage: 3x400V / 50Hz
# Connected load: approx. 85 kVA / 125A

Dimensions:
# Installation area: approx. 3.6 x 6 x 3.7 m
# Weight: approx. 10,500 kg

Equipment includes:
# CNC control: Siemens 840D SL
# Linear measuring systems: Heidenhain linear scales
# Chip extractor: Knoll Type 550 K-1
# Oil cooling system
# Cooling system for shaft, guides, and control cabinet
# 2 oil lubrication systems
# Oil filtration system (up to 80 bar): Knoll VRF450-2450 (can supply 2 machines simultaneously)
# Oil vapor extraction/recovery system: IFS Vario E2000 (2,000 m³/h)
# Fire suppression system: Kraft & Bauer
# Part detection P/Y: with low-pressure air monitors
# In-process measurement: Marposs T25
# Tool breakage detection and length measurement: inductive sensor
# Tool presence monitoring in spindle

Machine status: NOT OPERATIONAL
- Spindle tool and part presence sensors
- Tool breakage sensors
- Tool magazine piston and slide system door open/close (2 units)
- Tool magazine pistons and tool retainer slide system (2 units)
- A-axis position encoder
- Inductive and magnetic sensors (4 units each)
- Chip extraction conveyor requires repair
- Chiller for spindle cooling/heat exchanger
- Communication module Murr
- X axis linear scale
- Emulsion chip conveyor level sensor
- Hydraulic pump
- Motor for hydraulic pump (repairable)
- Heat exchanger unit
- Electric Siemens contactors for electrical cabinet (3 units)
- Safety door lock Euchner
- Emulsion filtration unit is shared with another machine (SW BA321 2460038)

Note: Machine is NOT WORKING and offered as described.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.