Filtreli türbinli kumlama makinesiTechnical Nowa Sól
OWPS 4,3x3,8x3,0
Filtreli türbinli kumlama makinesi
Technical Nowa Sól
OWPS 4,3x3,8x3,0
Başlangıç fiyatı KDV dahil değil
€54.000
Üretim yılı
2005
Koşul
Kullanılan
(tamamen fonksiyonel)
Konum
Elbląg 

Makineye ait bilgiler
- Makine tanımı:
- Filtreli türbinli kumlama makinesi
- Üretici:
- Technical Nowa Sól
- Modeli:
- OWPS 4,3x3,8x3,0
- Üretim yılı:
- 2005
- Koşul:
- ikinci el
- Işlevsellik:
- tamamen fonksiyonel
Fiyat ve Konum
Başlangıç fiyatı KDV dahil değil
€54.000
- Konum:
- Elbląg, Polonya

Çağrı
Teklif detayları
- Liste kimliği:
- A218-52603
- Son güncelleme tarihi:
- 05.05.2026
Açıklama
We offer this used Technical Nowa Sól OWPS 4.3x3.8x3.0 turbine shot blasting machine, year of manufacture 2005. The machine is fully operational and complete (currently disconnected from power supply) and includes a dust extraction filter for the blast chamber.
Hfjdpfx Acjy I Rq Nsdsg
Maximum weight of workpieces: 250 kN
Maximum workpiece dimensions during table rotation and turbine blasting: φ3500×2000 mm
Maximum workpiece length without table rotation and using pneumatic cleaning: 4300 mm
Maximum workpiece width without table rotation and using pneumatic cleaning: 3800 mm
Maximum workpiece height without table rotation and using pneumatic cleaning: 3000 mm
Number of throwing turbines: 4 units
Throwing turbine capacity: 350 kg/min each
Drive power per throwing turbine: 22 kW
Recommended abrasive type: cast steel shot or stainless steel shot
Recommended abrasive granulation: 0.2–2.0 mm
Pneumatic system tank capacity: 200 liters
Pneumatic nozzle diameter: 11 mm
Compressed air pressure: 0.4–0.6 MPa
Compressed air requirement for the shot blaster: 0.4 m³/h
Compressed air requirement for dust collector regeneration: 10 m³/h
Compressed air requirement for pneumatic cleaning: 8 m³/h
Dust collector type: dry bag filter (nonwoven), regenerated by compressed air pulse
Installed power (excluding dust collector fan): 130 kW
Supply voltage: 400/230 V
Supply frequency: 50 Hz
If you have any questions or require additional information, please send us a message or contact us by phone.
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Hfjdpfx Acjy I Rq Nsdsg
Maximum weight of workpieces: 250 kN
Maximum workpiece dimensions during table rotation and turbine blasting: φ3500×2000 mm
Maximum workpiece length without table rotation and using pneumatic cleaning: 4300 mm
Maximum workpiece width without table rotation and using pneumatic cleaning: 3800 mm
Maximum workpiece height without table rotation and using pneumatic cleaning: 3000 mm
Number of throwing turbines: 4 units
Throwing turbine capacity: 350 kg/min each
Drive power per throwing turbine: 22 kW
Recommended abrasive type: cast steel shot or stainless steel shot
Recommended abrasive granulation: 0.2–2.0 mm
Pneumatic system tank capacity: 200 liters
Pneumatic nozzle diameter: 11 mm
Compressed air pressure: 0.4–0.6 MPa
Compressed air requirement for the shot blaster: 0.4 m³/h
Compressed air requirement for dust collector regeneration: 10 m³/h
Compressed air requirement for pneumatic cleaning: 8 m³/h
Dust collector type: dry bag filter (nonwoven), regenerated by compressed air pulse
Installed power (excluding dust collector fan): 130 kW
Supply voltage: 400/230 V
Supply frequency: 50 Hz
If you have any questions or require additional information, please send us a message or contact us by phone.
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
Beri kayıtlı: 2026
1 Çevrimiçi ilan
İstek gönder
Telefon & Faks
+48 500 2... ilanlar
İlanınız başarıyla silindi
Bir hata oluştu
































