Yürüyerek girilebilen iklim simülasyon hücresi

TIRA KB 127 TCZ 4022 S -2K -40 bis +140°C

TIRA

Type: TCZ 4022 S -2K
Description: Air-cooled Climate Simulation Chamber
System Structure:
The system consists of the following main components:
- Walk-in, insulated chamber
- Air handling room
- Humidification unit
- Machinery room
- Control cabinet

Technical Data:
Performance Range for Temperature Testing:
- Temperature range: -40...+140°C
- Temperature stability in supply air (over time): ≤ ± 0.5°C
(without thermal test load per DIN 50011 T13 / EN 60068)
- Temperature stability in supply air (spatial): ≤ ± 1.0°C
(without thermal test load per DIN 50011 / EN 60068)
- Heating rate (per DIN 50011): approx. 2.0 K/min
(without thermal test load per DIN 50011 / EN 60068) or test specimen in range -30°C...+85°C
- Cooling rate (per DIN 50011): approx. 2.0 K/min
(without thermal test load per DIN 50011 / EN 60068) or test specimen in range -30°C...+85°C

Performance Range for Climate Testing:
- Temperature range: +10...+90°C
- Humidity range: 10...approx. 95% RH
(without thermal test load)
- Dew point temperature range: +5...+89°C
(without thermal test load)
- Humidity stability (in supply air, over time): ≤ ± 2.5% RH
(measured in the supply air)

Performance Range for Climate Testing with Heat Compensation:
- Temperature range: +15...+80°C
- Humidity: 15...approx. 80% RH
(without thermal test load)
with max. 16 kW heat compensation
- Dew point temperature range: +10...+74°C
(without thermal test load)

Dimensions:
- Test chamber (W x D x H): approx. 2,260 x 4,648 x 2,260 mm
- External dimensions (W x D x H): approx. 2,660 x 6,460 x 2,800 mm
- Clear test chamber door opening (W x H): 2,260 x 2,260 mm
- Climate unit KB 127 (W x D x H): 1,700 x 800 x 1,400 mm
- Control cabinet (W x D x H): 800 x 500 x 2,000 mm

Design Features:
- Air circulation: Supply air via perforated plate at back wall, ceiling area
Exhaust air via perforated plate at back wall, floor area
- Temperature control: Direct cooling by evaporating refrigerant in a finned heat exchanger; heating by electric resistance heater
- Dehumidification: Direct dehumidification by evaporating refrigerant in a heat exchanger
Iedpfx Aaevx S Hhegsar
- Interior lining: Stainless steel
- Exterior cladding: Galvanized, powder-coated sheet steel
- Floor design: Stainless steel, floor load 15,000 N/m²
- Wheel load (contact area ≥ 4 cm²): 1,500 N/wheel
- Door: Double-leaf door, stainless steel, exterior painted with viewing window (W x H) 1,000 x 1,000 mm
- Interior lighting: 4 spotlights, each 500 W
- Insulation: Double-layer, 80 mm PUR foam, 120 mm mineral wool

Refrigeration unit (1 pc): Bitzer 6G-30.2Y
- Refrigerant: R449A
- Refrigeration oil: SEZ 32
- Steam humidifier (1 pc): EDB 40

Coloring:
- Chamber RAL9010, white
- Door RAL9010, white
- Machine unit RAL7032, pebble grey
- Control cabinet RAL7032, pebble grey

Weights:
- Total system: approx. 4,900 kg
- Machine set KB 127: approx. 750 kg
- Control cabinet: approx. 120 kg
- Humidification unit: approx. 64 kg

Connections:
- Rated voltage: 400 V +6%/-10% 3/PE/N 50 Hz
- Rated power: 95 kW
- Rated current: 150 A

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.