CO2 Lazer Makinesi – Kesim ve Gravür

UNIVERSAL USA VLS 4.60

LASER IN LIKE-NEW CONDITION, USED ONLY FOR TESTS AND DEMONSTRATION PURPOSES

Laser cutting and engraving machine for the signage and promotional marketing industry - made in the USA
▪ CO2 laser tube in a sealed metal housing, Power 25 KW, Air cooling, Wavelength 10,640 nm, Approximate lifespan of 30,000 working hours.
▪ The laser source can be quickly replaced using the 'Quick-Change' system without technician intervention and without the need to realign the laser beam. Universal manufactures only sealed RF-Excited CO2 laser sources, which provide consistent power output and require no maintenance.
▪ Maximum material dimensions: 737 x 584 x 229 mm; larger materials can also be processed thanks to the open-front design.
▪ Working area: 610 x 457 mm
▪ Honeycomb cutting table – minimizes contact between the material and the reflective engraving table, efficiently removing debris and smoke generated during cutting.
▪ Maximum supported material weight: 18 kg
▪ Equipment dimensions: 914 x 965 x 914 mm
▪ Power supply: 220 – 240V / 5A

The package includes the following optional features:
▪ BOFA air filtration system, air flow 400 m3 / h – allows use even in enclosed commercial spaces
▪ Focus lens with a focal length of 2.0” (5.08 cm) and a focal spot diameter of 0.125 mm
Fjdpfx Afeytdtye Asfw
▪ HPDFO focus lens + beam collimator. Focal length: 2.0” (5.08 cm), Focal spot diameter: 0.025 mm – Suitable for metal marking
▪ Included rotary attachment – maximum object diameter 203 mm
▪ “Air-Assist” cooling and cleaning system – Provides a jet of clean air over the material surface to suppress flames and improve engraving/cutting quality. It also helps clean the equipment’s optical components (mirrors and lens)
▪ Metal cone for 90-degree air direction onto the material
▪ Back-Sweep – hose for 45-degree air direction onto the material
▪ 2 bar pressure compressor – PICCOLINO brand, provides clean air for the “Air-Assist” system
▪ ‘Laser Interface+’ operating software, user interface allowing automatic or manual control over power, speed, laser pulses (PPI), and other system settings. Includes a material database with predefined settings according to the processed material. Simply pick the material type from the list and the driver loads the optimal cutting/engraving parameters. Settings for non-standard materials can also be saved, stored, and loaded. For maximum processing efficiency, the interface can estimate the remaining time until engraving or cutting is finished.
▪ Additional software 1Touch Laser Photo – for very fine engravings, including complex image engraving.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.