PVC profil hattı (500x100 mm)

Weber & Blake DS-85 & 203-3-4,0 & 303-1600-270

A refurbished and fully operational profiling line for rigid PVC profiles (500 x 100 mm), comprising:

Parallel Twin-Screw Extruder
Manufacturer: Hans Weber Maschinenfabrik
Model: DS 85
Year of manufacture: 1979/2022
Machine No.: 85-399
Screw geometry: configured for rigid PVC powder
Screw diameter: 2 x 85 mm
Screw length: 17 x D
Screw rotation speed: max. approx. 30 rpm
Screw torque: 10,000 Nm
Motor power: 3.8 - 23.0 kW
Drive motor: Commutator motor Elektra Faurndau
Barrel heating/cooling zones: 4/2 (air cooling with fan)
Die heating zones: 8
Temperature controllers: 12 x digital controllers PMA, model KS40
Connected load: approx. 60 kW (without tooling)
Extrusion height: 1100 mm
Output capacity: approx. 150 - 180 kg/h for rigid PVC profiles
Special accessories: melt pressure sensor and melt temperature probe
Accessories: material hopper and connection flange
Accessories: vacuum pump (1.1 kW) incl. material separator
Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper
Weight: approx. 4000 kg
Remark: The electrical control cabinet was newly installed in 2022. Since then, the extruder has only run for 216 hours.
Condition: Refurbished and functionally tested

Vacuum Calibration Unit
Manufacturer: Blake Kunststoffproduktionsanlagen
Model: 203-3-4.0
Year of manufacture: 1997
Total length: 5600 mm
Profile width: max. approx. 500 mm
Vacuum pumps: 3 units (each 5.5 kW)
Longitudinal adjustment: motorized
Height/lateral adjustment: front and rear via leadscrew and handwheel
Stainless steel (V2A) tank: Inner width: 450 mm, outer width: 700 mm
Length: 4500 mm
Connected load, total: approx. 20 kW
Dimensions: 5600 x 1200 x 2300 mm (LxWxH)
Weight: approx. 3000 kg
Condition: Refurbished and functionally tested

Caterpillar Haul-off
Manufacturer: Blake Kunststoffproduktionsanlagen
Model: 303-1600-270
Year of manufacture: 1997
Pad width: 300 mm
Passage width: max. 500 mm
Passage height: 100 mm
Effective clamping length: 2400 mm
Haul-off speed: max. 8.0 m/min
Pulling force: approx. 40,000 N
Drive motor: DS motor, 7.5 kW
Bedpfx Afoyhckasmowh
Motor control: frequency inverter
Caterpillar clamping: pneumatic, front and rear
Extrusion height: 1000 – 1200 mm
Dimensions: 4000 x 1200 x 2300 mm (LxWxH)
Weight: approx. 3000 kg
Condition: Refurbished and functionally tested

Note:
The vacuum calibration unit including caterpillar haul-off can also be sold separately.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.