Pnömatik tornavida stantlı titreşimli besleyici Eco Line, titreşimli besleyici, ayırma cihazı, helez

WEBER ZSU 24

Vibratory Feeder with Pneumatic Screwdriving Stand Eco Line
Vibratory Feeder, Sorting Unit, Bowl Feeder, Vibrating Bowl, Automatic Screwdriving System
WEBER Type ZSU 24
Machine No.: 1113212 Year of Manufacture: 2003

Vibratory Feeder WEBER ZSU 24
Bowl Diameter: 240 mm
Bowl Internal Height: 70 mm
Sorting Track Width: 10 mm
Power Supply: 230 Volt, 50 Hz
Operating Pressure: 6 bar (for part separation and screws)
Control Voltage for Pneumatic Valves: 24 Volt
- Regulator for continuously adjustable vibration speed = infinitely adjustable conveying speed
- Vibrating bowl housed in a protective enclosure
- Equipped with pneumatic feed system
- Feed impulse via external electrical control
- Feeder was previously used to supply M5 x 12 mm screws
- Some pneumatic hoses need replacement
- PLC control Siemens S7-200 CPU 224 MISSING
Space requirements for bowl feeder (L x W x H): 450 x 450 x 315 mm
Weight of bowl feeder: 32 kg

Screwdriving Stand WEBER Eco Line
Guide Column: Ø 60 x 525 mm
Height Adjustment: 345 mm
Itedsxf Up Uopfx Ac Esp
Primary Stroke Pneumatic Cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm
Screwdriver Holder Diameter: Ø 50 mm
Secondary Stroke Pneumatic Cylinder 2 FESTO: 30 mm
Screwdriver Guide Diameter: Ø 37 mm
Distance Screwdriver Guide to Table: 135 - 465 mm
- 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM
- 1 piece flat cylinder FESTO, presumably type DZF-32-30-P-A-SM
- Screwdriver stroke frame on linear guide
- 3 position sensors on the cylinders
- Festo pressure switch
- Bosch pneumatic valve
Dimensions of Screwdriving Stand (W x D x H): 200 x 410 x 1050 mm
Weight of screwdriving stand: 35 kg
good condition

Total weight Vibratory feeder and screwdriving stand: 67 kg

Note:
The original PLC controller Siemens S7-200 CPU 224 is missing (see photo: control cabinet without PLC controller), thus automatic operation is not possible in this condition. The controller also managed the screw separation process and the screwdriving system itself. The bowl feeder is fully operational without the PLC controller; the integrated bowl feeder regulator does not require PLC activation.

Process:
Fasteners are loaded as bulk material into the bowl and moved upwards by the bowl’s mechanical oscillation (micro-throw principle). The bowl feeder is switched on or off automatically depending on the fill level of the screw magazine. The screw is then pneumatically conveyed via a plastic tube to the downstream equipment. The feed impulse for each screw is triggered externally by the downstream equipment.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.