3 eksenli (X-Y-Z) CNC İŞLEME MERKEZİ

WEEKE (HOMAG Group) BHX 500

Koşul: mükemmel (kullanılmış), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTRE Moving plate (workpiece), stationary working head - horizontal plate (workpiece) Controller: PowerControl PC86 powerTouch (woodWOP software) Safety enclosure for the working head 2 workpiece clamps for easy access to the working area Redpjyyvttefx Almjt WEEKE pre-positioning unit for faster positioning of workpieces in the machine with clamping vices Infeed support table (workpiece support) - outfeed table (with powered conveyor belt) With automatic panel pusher Min. workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm) Max. workpiece dimensions (X-Y-Z) mm: 3000 x 1000 (option 1300) x 80 (2 x 40 mm) Simultaneous machining of 2 workpieces (in Z-axis) Separate control cabinet and operating console WORKING UNITS (TOP): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW - 42 independent vertical drilling spindles (drill head power 2.3 kW) - 10 independent horizontal drilling spindles (8 in X + 2 in Y) - 1 grooving saw unit (swivels 90° in X-Y direction), diameter 125 mm - 1 vertical main spindle (routing unit) ETP (power 6 kW) WORKING UNITS (BOTTOM): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW - 42 independent vertical drilling spindles (drill head power 2.3 kW) - 10 independent horizontal drilling spindles (8 in X + 2 in Y) - 1 grooving saw unit (swivels 90° in X-Y direction), diameter 125 mm - 1 vertical main spindle (routing unit) ETP (power 6 kW)

Koşul: ikinci el, Üretim yılı: 2024, New demonstration machine! List price: €32,665 – complete in standard configuration with: Sturdy, torsion-resistant steel frame, welded and bolted construction. Upper slat pressing beam with 6 elements, lateral slat pressing beam with 5 elements. Slat pressing beams with proven tolerance compensation (Ganner system) for tightly clamped carcass joints. Counter-pressure surfaces (side pressure wall, floor) are continuous 38 mm thick coated base plates. Continuous pressing surface with a height of 95 mm on the lower vertical pressing beam. Electromotive adjustment of both pressing beams via precision acme lead screws (with increased pitch and concentricity accuracy) and high-performance traveling nuts with grease reservoir. Pressing is powered electromotively by two separate worm gear motors (2 x 0.75 kW). The pressing force of the beams is continuously and electronically adjustable via two potentiometers and controlled by a frequency converter; this makes the press force control absolutely maintenance-free. Pressing force for horizontal pressing beam: min. 500 daN (kg) up to max. 2200 daN (kg), infinitely variable. Pressing force for vertical pressing beam: min. 300 daN (kg) up to max. 2200 daN (kg), infinitely variable. Pressing and adjustment speed of the beams with fine positioning, selectable via 3-stage switch: 5 / 10 / 25 mm/second. Simple operation via 6 separate push buttons, 8 movement sequences can be selected via the control system. Freely adjustable pressing time preselection with automatic opening, 0–30 min (switchable to seconds or hours). Working height/feeding height: 300 mm. Working dimensions: Length min. 150 mm, max. 2,500 mm; Height min. 150 mm, max. 1,400 mm; Depth: 700 mm. Weight: approx. 1,800 kg net. Dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m. Electrical connection: 400 V, 3-phase, 50 Hz (3.2 kVA, 16 A). Additional equipment: - Rapid traverse speed for quick positioning of pressing beams, controlled by automatic workpiece detection with sensors in the beams; pressing speeds of 5 / 10 / 25 mm/sec and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for special part clamping. Redpfx Aljuf Hx Hsmot - 1 set of machine feet (working height 500 mm). Location: