Değiştirilebilir şasili römork

WIELTON BDF 2-Achs-Wechselfahrgestell 1120-1320

BDF 2-Axle Swap Chassis 1120-1320

Dimensions and Weights
Distance between twist locks - width: 2259 mm
Distance between twist locks - length: 5853 mm
Wheelbase: 1420 mm
Drop-off height: 1120-1320 mm
Special lift: 450 mm
Ride height: approx. 1110 mm
Tyres: 385/55R22.5
Drawbar eye height: 400 mm
Gross weight: 18,000 kg
Manufactured in accordance with EN 284 for C745/C782
Unladen weight: 3,270 kg

TECHNICAL DATA
Chassis
Rubber-steel buffer at rear
Guidance rollers - 2 pairs
Bolted drawbar without longitudinal adjustment
Side underrun protection, steel, Wielton design
Frame made of high-tensile steel S700, hot-dip galvanized
Container carrier with individual locks (twist locks) for securing swap bodies
Wheelbase: 1,420 mm
Drawbar eye Ø50mm, height-adjustable
Steel underrun protection, galvanized
Adjustable front bumper, suitable for C745 / C782 superstructures
Steel lamp bracket

Axles and Suspension
Number of axles: 2
BPW axles, 2x 9,000 kg, 22.5", with disc brakes
Large air suspension stroke (450 mm)

Support legs
2 SAF steel crank support legs at the front
2 SAF steel crank support legs at the rear

Mudguards
Single plastic wheel mudguards

Rims
4x steel rims 22.5-11.75 ET-120

Tyres
4x Hankook tyres 385-55-22.5

Other chassis equipment
Marking plates according to ECE
Chocks with handles, fitted
Two toolboxes (145 l Aberg), on both sides in front of the axles

Brake system / Pneumatics
Wabco brake system with basic modulator with RSS/RSP
Steel air reservoir
Duomatic connection
HS valve, mounted in front of the axles on the left side (driver's side)

Chassis Painting
Frame hot-dip galvanized
Frame hot-dip galvanized - unpainted

Electrical system
Partial-LED lighting Aspöck EUROPOINT III
Hybrid lamp version (LED + incandescent bulbs)
Position lights in LED technology
Other functions with conventional bulbs
Wiring harness with pivot arm, right side (passenger side)
Electrical connectors: 15-pin and EBS. The system meets ADR requirements
LED work lights controlled by a switch on the HS console: 5 units, LED rear lights 2 units (both sides, behind axles), LED front lights 2 units (both sides, in front of axles), centrally mounted LED light 1 unit, in front of rear container carrier

Additional Systems
Cedpeyrwk Nefx Adtopw
The system is designed for semi-trailers and trailers and serves to monitor the vehicle’s tyre pressure and temperature. Manufacturer: ABERG Connect.
The system comprises TPMS sensors mounted on the rims (for tyre pressure and temperature) and a device connected to the EBS.
Suspension relief system (bounce control)

Markings
Partial contour marking with Wielton logo
Partial contour marking, side white
Partial contour marking, rear red

Warranty
The manufacturer grants a 24-month warranty on the vehicle, subject to the statutory provisions of the respective market.
The warranty applies in accordance with the terms and conditions of sale and delivery, provided that the maintenance intervals specified in the warranty booklet are observed.
Warranty periods for ON-ROAD/OFF ROAD products:
- 24 months for the complete product from date of first registration
- 36 months on the vehicle frame from date of first registration (excluding surface rust)
- 10 years warranty against chassis corrosion-through (defined as corrosion from inside to outside)
Warranty: 24 months from registration, excluding wear parts, subject to a technical inspection after 12 months. The respective axle components are covered by the warranty provided by the respective axle manufac

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.