Kenar bantlama makinesi

WINTER KANTOMAX BASIC FÜ

Durumu: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 4200 x 1500 x 1500 mm Weight: 1050 kg Total power requirement: 8 kW Edge banding machine KANTOMAX BASIC FÜ+EK DELUXE - Min./Max. edge thickness: 0.4 - 2 mm - Min./Max. edge height: 15 - 55 mm - Min./Max. workpiece height: 15 - 50 mm - Min. workpiece width: 70 mm - Min. workpiece length: 200 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Operator panel (touch panel) at machine infeed, at eye level - Chain feed - Support plate for PVC and ABS edge band rolls up to 550 mm - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for glue joint compression - Centrally adjustable top pressure - glue pot Teflon-coated for hot-melt granulate, capacity 3 kg - Application of glue to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200 °C - Pneumatic end trimming unit Lodpfx Ahevz E Tmewehr - Pneumatic cylinder for workpiece spacing - Joint trimming unit with 2 HM jointing cutterheads for pre-trimming before gluing, vertical spindle adjustment, electro-pneumatic horizontal control, 2 motors each 1.4 kW, 200 Hz, 9000 rpm (1 x clockwise, 1 x counterclockwise) - Heating lamp for panel preheating - Pre-trimming from the roll - 3 solid steel pressure rollers - Flush and radius milling units, top and bottom, with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Corner rounding unit (contour trimming), top and bottom, for flush trimming and corner rounding of PVC edges, motor 0.55 kW, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom, and side for rounding pre-milled PVC edges - Buffing unit for finishing top and bottom edges, 2 motors each 0.18 kW, 50 Hz, 1400 rpm, adjustable tilt and height - Spray nozzle system (cleaning fluid) - Total power consumption: 8.0 kW / 400 V - Extraction ports: 4 x Ø 100 mm - Extendable workpiece support - Noise protection enclosure with viewing window - Compressed air connection: 6 bar - Dimensions: L=4200, W=1500, H=1500 mm - Transport dimensions: L=4000, W=700, H=1500 mm - Weight: 1050 kg

Durumu: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 3810 x 575 x 1520 mm Weight: 1000 kg Total power requirement: 8 kW Edge banding machine KANTOMAX BASIC FÜ+EK - Min./max. edge thickness: 0.4 - 2 mm - Min./max. edge height: 15 - 48 mm - Min./max. workpiece height: 10 - 45 mm - Min. workpiece width: 80 mm Lhodpfjvz E Scsx Ahwer - Min. workpiece length: 120 mm - Feed motor: 1.1 kW - Feed speed: 8, 12, 16 m/min - Control panel at the machine infeed at eye level - Chain feed - Support plate for PVC and ABS edge banding material - Pressure zone with pneumatically driven main pressure roller and follow-up rollers to consolidate the glue joint - Central adjustable top pressure - Glue pot with Teflon coating for hot-melt granulate adhesive - Glue application to the workpiece by means of glue roller - Electronic temperature control, operating temperature 180 - 200 °C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece spacing - Jointing unit with 2 DIA pre-milling cutter heads for edge preparation before gluing, vertical spindle adjustment, horizontal electro-pneumatic control, 2 motors each 1.8 kW, 200 Hz, 12,000 rpm (1 x with, 1 x against feed) - End cutting unit for front and rear edge overhang; high-precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pull-cutting for high precision - Flush and radius trimming unit top and bottom with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Corner rounding unit (corner copying) top and bottom for rounding PVC edges, motor 0.37 kW, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom, and side for rounding pre-milled PVC edges - Buffing unit for polishing the edges top and bottom, 2 motors each 0.18 kW, 50 Hz, 1400 rpm, adjustable angle and height - Total power consumption: 8.0 kW / 400 V - Extraction connection Ø 100 mm - Extendable workpiece support - Soundproof enclosure with viewing window - Compressed air connection: 6 bar - Dimensions: L=4000, W=1000, H=1420 mm - Transport dimensions: L=3810, W=575, H=1520 mm - Weight: 1000 kg