Punta kaynak makinesi

WMA WMP 08-01

WMA WMP 08 One-Hand Spot Welder
Air-cooled one-hand spot welding system for vehicle manufacturing, tank fabrication, steel cabinet construction, sheet metal processing, and the wire industry.

- Effortless welding of all sheet metals
- Zinc-plated sheets can be welded reliably thanks to controlled current rise and fall
- Air-cooled, equipped for external water cooling
- Working tools are easy to change due to standardized rotary fittings
- Only one plug each for welding current line, control cable, and water cooling
- Consistently reproducible welding results thanks to built-in automatic energy control

Microprocessor Thyristor Control
- Constant current regulation
- Continuous process monitoring
Bjdpfxeq H Aqxj Agfscw
- Easy and pleasant to operate
- All set parameters and process values are clearly visible at a glance
- Changes to welding parameters permitted only for authorized personnel
- Central PC-based management of configuration and program settings

WMA WMS 108 Microprocessor Thyristor Control

- 7 time settings
- 8 programs
- Built-in device
- Automatic mains frequency detection 50/60 Hz
- Secure parameter storage in case of power failure
- “with/without current” switching via button

Additional configuration parameters (locked for users):
- Program selection
- Step-forward contact
- Step-forward contact time
- Two-hand interlock (Check)
- Start signal interlock
- Current flow monitoring
- Response threshold
- Current flow monitoring
- Monitoring time
- Current flow monitoring
- Power factor adjustment
- First half-wave delay

External inputs (24V DC stabilized and switchable):
- Thermal switch
- Thyristor temperature
- Emergency stop
- Start 1
- Start 2*
- Pressure contact
- Program 1*
- Program 2*
- Pre-stroke ON
- Program interruption after hold time (only force)
- Two-hand interlock (Check)*

*These functions can be activated or locked via configuration parameters.

External outputs (24V DC unregulated ± 20%, switchable, max. 5 W):
- Solenoid valve, pre-stroke
- Solenoid valve, welding
- Step-forward relay
- Ready relay

Manufacturer: WMA
Model: WMP 08-01
Rated voltage: 400 V
Mains frequency: 50 Hz
Rated power (at 50% duty cycle): 22.5 kVA
Control cabinet with Siemens LOGO PLC

PDF files can be found under the "Documents" tab.

Financing through our bank is possible as well.
komplett-konzept.leasingo.de

Further items—new and used—can be found in our shop!
International shipping costs on request!

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.