Darbe noktalı punta kaynak makinesiWMA
WMP 08
Darbe noktalı punta kaynak makinesi
WMA
WMP 08
sabit fiyat KDV hariç
€3.000
Durumu
Kullanılmış
Konum
Viersen 

Resimleri göster
Haritayı göster
Makineye ait bilgiler
- Makine tanımı:
- Darbe noktalı punta kaynak makinesi
- Makine üreticisi:
- WMA
- Model:
- WMP 08
- Durumu:
- mükemmel (kullanılmış)
- işlevsellik:
- tamamen fonksiyonel
Fiyat ve Konum
sabit fiyat KDV hariç
€3.000
- Konum:
- 41748 Viersen-Ummer, Deutschland

Ara
Teklif detayları
- Listeleme kimliği:
- A203-83685
- Referans no.:
- 8407
- Son güncelleme tarihi:
- 27.10.2025
Açıklama
WMA WMP 08 spot welder in excellent condition,
The machine shows minimal signs of use and was only rarely operated.
Air-cooled single-hand spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry.
- Trouble-free welding of all sheet materials
- Galvanized sheets can be welded perfectly thanks to controlled current ramp-up and ramp-down
- Air-cooled, prepared for external water cooling
- Tools can be easily changed via standardized rotary connections
- Only one connector required for welding current lead, control cable, and water cooling
- Consistently reproducible welding results thanks to built-in automatic energy control
Microprocessor Thyristor Control Unit
- Constant current control
- Seamless process monitoring
- Simple and user-friendly operation
- All set parameters and process values are visible at a glance
- Changes to welding parameters only possible for authorized personnel
- Centralized management of configuration and program settings via PC
WMA WMS 108 Microprocessor Thyristor Control
- 7 timing settings
- 8 programs
- Built-in device
- Automatic mains frequency detection 50/60 Hz
- Parameters stored securely even in case of power failure
- Switch for 'with/without current' operation
Additional configuration parameters (locked for users):
- Program selection
- Advancement contact
- Advancement contact time
- Two-hand safety operation (check)
Nedpfxjxrb Tgo Afzjlh
- Start signal lock
- Current flow monitoring
- Trigger threshold
- Monitoring time
- Power factor adjustment
- Delay first half-wave
External inputs (24V, DC stabilized and switching):
- Thermal switch
- Thyristor temperature
- EMERGENCY STOP
- Start 1
- Start 2*
- Pressure switch
- Program 1*
- Program 2*
- Pre-travel on
- Program interruption after hold time (only force)
- Two-hand safety operation (check)*
*These functions can be activated or locked via configuration parameters.
External outputs (24V DC, unstable ±20%; switching, max. 5 W):
- Solenoid valve pre-travel
- Solenoid valve welding
- Relay advancement contact
- Relay operation ready
Shipping via freight service can be arranged upon agreement.
#8407
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
The machine shows minimal signs of use and was only rarely operated.
Air-cooled single-hand spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry.
- Trouble-free welding of all sheet materials
- Galvanized sheets can be welded perfectly thanks to controlled current ramp-up and ramp-down
- Air-cooled, prepared for external water cooling
- Tools can be easily changed via standardized rotary connections
- Only one connector required for welding current lead, control cable, and water cooling
- Consistently reproducible welding results thanks to built-in automatic energy control
Microprocessor Thyristor Control Unit
- Constant current control
- Seamless process monitoring
- Simple and user-friendly operation
- All set parameters and process values are visible at a glance
- Changes to welding parameters only possible for authorized personnel
- Centralized management of configuration and program settings via PC
WMA WMS 108 Microprocessor Thyristor Control
- 7 timing settings
- 8 programs
- Built-in device
- Automatic mains frequency detection 50/60 Hz
- Parameters stored securely even in case of power failure
- Switch for 'with/without current' operation
Additional configuration parameters (locked for users):
- Program selection
- Advancement contact
- Advancement contact time
- Two-hand safety operation (check)
Nedpfxjxrb Tgo Afzjlh
- Start signal lock
- Current flow monitoring
- Trigger threshold
- Monitoring time
- Power factor adjustment
- Delay first half-wave
External inputs (24V, DC stabilized and switching):
- Thermal switch
- Thyristor temperature
- EMERGENCY STOP
- Start 1
- Start 2*
- Pressure switch
- Program 1*
- Program 2*
- Pre-travel on
- Program interruption after hold time (only force)
- Two-hand safety operation (check)*
*These functions can be activated or locked via configuration parameters.
External outputs (24V DC, unstable ±20%; switching, max. 5 W):
- Solenoid valve pre-travel
- Solenoid valve welding
- Relay advancement contact
- Relay operation ready
Shipping via freight service can be arranged upon agreement.
#8407
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İstek gönder
Telefon & Faks
+49 2162 ... ilanlar
İlanınız başarıyla silindi
Bir hata oluştu

































