Veltman machines BV

Durumu: mükemmel (kullanılmış), Deckel FP1 Tool Milling Machine Djdpfeyn Iphex Adtjcd with New Digital Readout (3 Axes) Machine No. 55192-08 Travel Paths: X 300 mm Y 150 mm Z 340 mm Spindle Speed: 40–2000 rpm Feed Rate: 10 to 500 mm/min Fixed Angle Table: 600 x 210 mm, max. load 200 kg Vertically extendable quill: 60 mm SK40 taper with DECKEL saw thread S20 x 2 Vertical and horizontal spindle Milling head manually swivels (+/- 90°) Equipment/Accessories: - As-new machine table - New 3-axis digital readout - Machine vise - New spindle nut, X-axis - New SK40 internal spindle - Control cabinet converted to new main switch - Coolant system with new hoses - Chip tray - Emergency stop The machine has been technically inspected and runs perfectly. Backlash X-axis: 0.05 mm Backlash Y-axis: 0.2 mm Backlash Z-axis: 0.4 mm Price net, ex works, loaded from stock.

Durumu: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Deckel FP 1 Aktiv - 3 axes, Serial number 2102 - 2433, Machine was overhauled around 2010 by Arnold GmbH, Dcedpfxsyn Efme Adtod Travel X/Y/Z 300/160/340 mm, Spindle speed up to 2,000 rpm, Infinitely variable feed on all 3 axes, Heidenhain digital readout, Weight approx. 800 kg, Accessories,

Durumu: iyi (kullanılmış), Deckel CNC tool milling machine Control system Dimensions & Weight: Weight: approx. 1.3 t - 1.5 t. Dimensions: approx. L x W x H 1.5 m x 1.5 m x 1.6 m The machine is equipped with mechanical handwheels for manual operation in addition to CNC control. Control: DECKEL Dialog 4 (6004 50 004602 02) Training machine Dodpsynf E Tefx Adtecd The data was read directly from the machine, therefore provided without guarantee.

Durumu: mükemmel (kullanılmış), Üretim yılı: 1981, Fonksiyonellik: tamamen fonksiyonel, giriş voltajı: 380 V, son revizyon yılı: 2013, We are offering this very well-maintained Deckel FP 1 2101 tool milling machine, year of manufacture 1981. The milling machine was completely overhauled by FPS in 2013. As part of the overhaul, the machine was also technically upgraded to achieve CE conformity. A ND780 position display was also installed. This is a compact and easy-to-use machine, ideal for a workshop or for fixture construction. The milling machine was used in medical technology for manufacturing fixtures and has therefore only operated for a few hours since the overhaul. The machine is sold without warranty. Control type: FP 1 2101 Serial number: 5685 Year of manufacture: 1981 Wiring diagram: 6004 004102 Operating voltage: 380 V~ Dedsym Ulgopfx Adtjcd Frequency: 50 Hz Rated current: 13 A~ If you have any questions or require further information, feel free to send us a message or give us a call.

Durumu: incelemesiz (kullanılmış), Friedrich Deckel E2 Üniversal Takım Freze Makinesi ----- Dcodpfx Adeymxdyjtsd Ürünün durumu: Makine, bir şirket tasfiyesinden alınmış olup, tarafımızca test edilmemiştir. Bu nedenle satış, özellikle tamir, proje amaçlı veya yedek parça temini için gerçekleştirilmektedir. Teslimat kapsamı yalnızca fotoğraflarda görünen parçaları içermektedir. Başka bir aksesuar mevcut değildir. Dahili numara: 26.144

Durumu: mükemmel (kullanılmış), Deckel FP 3 freze makinesi Dodpfeymffksx Adtscd - 3 eksenli dijital göstergesi: FAGOR Innova 30i-M, yeni - Y ekseni hareketi: 500 mm - X ekseni hareketi: 300 mm - Z ekseni hareketi: 380 mm - SK 40 çekme dişi S 20 x 2 - Dikey freze kafası - 40 - 2.000 devir/dakika, 18 kademeli - Üniversal tabla - Tabla ölçüleri: 800 x 420 mm - T kanal genişliği: 12 mm - Makine ağırlığı: yaklaşık 1.500 kg - Boyutlar (UxGxY): yaklaşık 1.400 x 1.800 x 1.900 mm - Merkezî yağlama, manuel işletim - Soğutma sistemi - Kullanım kılavuzu 2000 yılında Harich firması tarafından tamamen revize edilmiştir!

Durumu: kullanılmış, Üretim yılı: 1989, Fonksiyonellik: tamamen fonksiyonel, X ekseni hareket mesafesi: 490 mm, Y ekseni hareket mesafesi: 290 mm, Z ekseni hareket mesafesi: 390 mm, Technical Data: Main Drive: Pole-changing three-phase brake motor with forward/reverse operation ..... .. 2.0/4.0 kW 21 programmable spindle speeds ..... 25 ... 2500 rpm Tool holder in retractable quill ..... NK40 Tool clamping operated by switch Feed Drive: Central DC motor with electromagnetic clutches ..... . ..... 1.4 kW (5 Nm) Feed rate (programmable) ..... 5 ... 500 mm/min Feed correction ..... from 20 to 120% Rapid traverse for X, Y, and Z axes ..... ... . 1500 mm/min Travel Range, Motor-driven / Manual: X (longitudinal) ..... 490/500 mm Y (cross) ..... 290/300 mm Z (vertical) without bellows ..... 390/400 mm with bellows ..... 345/355 mm + Vertical milling head on column Dcedpfsymc Upjx Adtjd can be moved manually ..... 200 mm Machine Dimensions (min.) Length/Width/Height ..... . 1420x1290x1870 mm (see also foundation plan) Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Disassembly, transport, and expert reassembly – all from a single source. Billing according to individual terms and duration. Contact us for your personalized offer.

Durumu: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Gravür makinesi Deckel G1 L Aksesuar: Yazı seti Dodpfx Adeyl U Hnjtscd

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 1995, Available immediately, ex location: CNC Tool Milling Machine Deckel Model FP 5 – 80 Year of manufacture: 1995 CNC control: Dialog 12 Universal table: 750 x 520 mm Travels X / Y / Z: 800 / 550 / 500 mm Drive power: 9 kW Quill stroke: 80 mm Electronic handwheel Spindle speeds: 32 – 5000 rpm Feeds: 0 – 6000 mm / min Dodpfxoyl T Uqo Adtscd Weight: 4.5 t Price: EUR 2,750 (plus VAT), ex location.

Durumu: kullanılmış, DECKEL bölme başlığı, doğrudan ve dolaylı bölme için uygundur Aşağıdaki donanımlar dahil: - Karşı dayama ile birlikte - Çekme borusu ile birlikte - 3 adet bölme diski ile birlikte Dcedpfxoyl T S Ne Adted Opsiyonel: 3-ayaklı ve/veya 4-ayaklı ayna

Durumu: mükemmel (kullanılmış), Takım Freze Makinesi DECKEL FP 1 Üç Eksen Aktif Dijital TNC 113 Eğitim kurumundan - CE İşareti - Hareket mesafeleri X / Y / Z: 300x160x340 mm - Heidenhain TNC 113 / Takmalı kontrol - Devir aralığı: 40 - 2000 devir/dakika - Üç eksende kademesiz ilerleme - Üç eksende hızlı hareket - 100 mm kaydırılabilir dik kafa - Dikey - yatay frezeleme ünitesi - Takım bağlantısı: ISO 40 - Tahrik gücü: 1,5 / 1,9 kW - Sabit açılı tabla - Talaş tavası - Soğutma sıvısı sistemi - Çalışma lambası - Dokümantasyon Dodpsyln Irsfx Adtecd Ölçüler: UxGxY 1,3x1,2x1,7 metre / Ağırlık: 950 kg Hatalar ve giriş yanlışlıkları saklıdır.

Durumu: mükemmel (kullanılmış), Deckel FP1 AKTIV (3-Axis Aktiv) Machine No.: 2102-3240 Year of manufacture: approx. 1988 Travel paths: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment/Accessories: - 3-axis active digital readout HEIDENHAIN type TNC 113 - Infinitely variable feed on X, Y, and Z axes Dcodpfx Asyll A Todted - Quill travel on vertical milling head: 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Coolant system (coolant tank integrated in the machine base) - Documentation - Central lubrication system - Machine vice - Various tool holders/collets/tools Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry inspection videos can be provided upon request. Backlash Y-axis: 0.1 mm Backlash X-axis: 0.2 mm Backlash Z-axis: 0.15 mm Runout horizontal spindle: 0.001 mm Runout vertical spindle: 0.001 mm Deviation in parallelism Y-axis: 0.002 mm (measuring length 150 mm) Deviation in parallelism X-axis: 0.01 mm (measuring length 300 mm) Geometry measurement videos can be provided upon request. The following parts have been renewed: - Gears in the horizontal head replaced and gear shaft newly mounted - New guide cover Z-axis + various attachments - Machine refurbished - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Function test performed

Durumu: yenilenmiş (kullanılmış), Üretim yılı: 1984, Fonksiyonellik: tamamen fonksiyonel, X ekseni hareket mesafesi: 300 mm, Y ekseni hareket mesafesi: 150 mm, Z ekseni hareket mesafesi: 340 mm, kamış kalem darbesi: 80 mm, maksimum mil hızı: 2.000 dev/dak, mil hızı (dk.): 40 dev/dak, masa uzunluğu: 210 mm, masa genişliği: 600 mm, toplam yükseklik: 1.750 mm, toplam uzunluk: 1.400 mm, toplam genişlik: 1.600 mm, dönüş hızı (maks.): 2.000 dev/dak, dönme hızı (dk.): 40 dev/dak, toplam ağırlık: 850 kg, masa yükü: 200 kg, garanti süresi: 3 aylar, Machine overhauled/partially overhauled by us in 2026, the machine is in excellent condition. As part of the partial overhaul, a new brake motor was installed. Controls 3-axis - Active - Digital display HEIDENHAIN TNC 113 Spindle Speed 40-2000 rpm, geometrically stepped direct drive gearbox with 18 speed stages for maximum torque/milling performance Feed Rate 5 to 500 mm/min, infinitely adjustable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 80 mm SK40 with M16 drawbar thread Optionally: with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 300/150/340 mm Table Fixed angle table 600x210 mm Table load capacity max. 200 kg Equipment • Vertical and horizontal spindle • Milling head manually tiltable +/- 90° • Z-axis bellows Options • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing head Dcedpjyi Amwjfx Adted • Counter support • etc.

Durumu: yenilenmiş (kullanılmış), Üretim yılı: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 – workshop tested Machine no.: 51720/08 Geometric acceptance with inspection protocol Accessories: Dedeyipmwopfx Adtscd - 3-axis digital display K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual Used as seen, without warranty The machine is technically in accordance with the state of the art of its year of manufacture.

Durumu: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Tüm eksenlerde kademesiz ilerlemeler Pinol hareketi 60 mm Tabla yüzeyi 600 x 250 mm Devir sayıları 45 - 1950 devir/dak İlerlemeler 10 – 470 mm/dak...kademesiz ayarlanabilir...: Dcsdpfx Adjyianiotod Boyuna hareket (X) 315 mm Enine hareket (Y) 180 mm Dikey hareket (Z) 320 mm .

Durumu: iyi (kullanılmış), Üretim yılı: 1987, Takım tezgahı freze makinesi DECKEL FP 4NC, No. 2810-0564, üretim yılı 1987, tabla ölçüsü 700 x 430 mm, eksen hareketi XYZ = 500 x 500 x 600 mm, kontrol sistemi GRUNDIG Dialog 4. Dcsdpfsyhqtvex Adted

Durumu: mükemmel (kullanılmış), Üretim yılı: 2002, Kontrol 3 eksenli Heidenhain TNC 123 aktifleştirilmiş yol kontrolü. Devir sayısı 40 - 2000 dev/dak, maksimum tork ve frezeleme gücü için 16 kademeli, geometrik olarak derecelendirilmiş doğrudan tahrikli şanzıman. İlerleme hızı 5 ila 500 mm/dak, kademesiz ayarlanabilir. Hızlı hareket 1,2 m/dak. Quill: Dikeyde 60 mm strok, SK40 M16 çekme dişi ile uzatılabilir quill. Eksenler X/Y/Z: 300/160/340 mm. Döner tabla: 600 x 210 mm, maks. yük kapasitesi 200 kg. Dcedpfx Aoyg I Nfsdtod

Durumu: iyi (kullanılmış), Üretim yılı: 2007, Internal article no.: 26009 Dcodpfx Ajyg Dk Sjdtjd You are welcome to inspect the machine under power on over 500m² of heated storage space. Universal Milling Machine Intos FN20 Year of manufacture: 2007 + 3-axis digital readout + Hydraulic machine vice + Operating manual + Machine lamp + Coolant pump Travels: X 300 / Y 200 / Z 350mm Spindle taper: SK40 Speed: 50 - 2500 rpm Clamping surface of milling table: 240 x 600mm Feed rate: 8 - 400mm/min Rapid traverse: 1340mm/min Dimensions (LxWxH) approx.: 130 x 150 x 190cm Weight: approx. 1000kg The machine comes from a training facility and is in well-maintained condition.

Durumu: iyi (kullanılmış), Üretim yılı: 2000, İç Makale No.: 26005 §25a UStG’ye göre diferansiyel vergilendirilmektedir. Düzenli bir fatura alacaksınız ancak KDV belirtilmeyecektir. Makinayı elektrik bağlantılı olarak, 500 m²'nin üzerinde ısıtmalı depo alanımızda inceleyebilirsiniz. Stimin FUS-22-2M Üretim yılı: 2000 Eksende hareket mesafeleri: X 320 / Y 250 / Z 300 mm Mil bağlantısı: ISO40 Mil devir sayıları: 45 - 2240 dev/dk Tabla boyutu: 670 x 320 mm İlerleme hızları: 12,5 - 630 mm/dk Tahrik gücü: 1,5 kW Pinol hareketi: 60 mm Toplam güç gereksinimi: 2,5 kW Dedpfx Adoygv Shjtecd Yaklaşık ölçüler (UxGxY): 1,10 x 1,20 x 1,90 m Makine ağırlığı: yaklaşık 1.100 kg Makine bir eğitim kurumundan gelmektedir ve bakımlı durumdadır.

Durumu: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Universal Milling Machine Metba MB1 with 3-Axis Digital Readout Technical Specifications: >> Year of manufacture: approx. 1980 >> 3-axis digital readout Mitutoyo >> Fixed angle table >> Spindle speed: 45 - 2050 rpm >> Feed on 2 axes: 11-490 mm/min >> Travels X/Y/Z: 300/150/340 mm >> Equipment: vertical & horizontal spindle >> Vertical quill extendable - SK-40 >> Tool clamping system S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout Mitutoyo >> Coolant system Dcodpfx Aoydc Spjdtod >> Various tool holders >> Operating manual About the machine: Offered is a Universal Milling Machine Metba MB1 in very good condition. The Metba runs smoothly even at high speeds. The machine has minimal backlash in the cranks and all spindles move freely. The MB1 comes from a private owner and has seen little use. Mechanically and electrically tested. The digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine on site under power.

Durumu: iyi (kullanılmış), Üretim yılı: 1990, Deckel FP 4 MK Tool Milling Machine Deckel FP 4 MK with Heidenhain TNC 113 Control, Year of Manufacture 1990, Fully Refurbished in 2014, Excellent Condition, CE-Compliant! The machine comes from Continental’s training workshop. Technical Data: Year of manufacture: 1990 Refurbished: 2014 Digital Readout: 3-axis active digital readout HEIDENHAIN TNC 113 Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Tool Holder: SK 40 hydraulic tool clamping DIN 2080 Milling Head Type: Vertical milling head Spindle Speed Range: 50 – 2,500 rpm, 18 steps Table Type: Swivel table Clamping Surface: 800 x 490 mm T-slot Size: 14 mm Weight: approx. 1,450 kg Dimensions: approx. 2,500 x 2,700 x 2,100 mm Accessories and Equipment: Heidenhain TNC 113 control Hydraulic clamping vertical and horizontal Dcjdpfx Aeyalcpsdted Automatic central lubrication Spindle brake Technical documentation, spare part diagrams, operating manual for the controller, and programming examples Handwheels Coolant unit About the Machine: Offered is a Deckel FP 4 MK tool milling machine equipped with a Heidenhain TNC 113 control. This universal milling machine is in very good original condition and comes from a facility where it was used sparingly for training purposes. The control is very easy to use. Furthermore, the machine features hydraulic clamping for both vertical and horizontal orientations. Conversion from vertical to horizontal milling is straightforward, facilitated by the swiveling vertical head. The guides are regularly lubricated by the central lubrication system. The Deckel has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Deckel on site under power. You can find more milling machines from renowned manufacturers on our website.

Durumu: kullanılmış, Tabla boyutu 630 x 200 mm X/Y/Z hareketi - 250/200/300 mm Mil devir sayısı 2000 dev/dak Mil konikliği MK 4 Tüm yönlerde otomatik ilerleme ve hızlı hareket Donanım: Eğilebilir tabla 500 x 200 mm 60 mm delme hareketli matkap kafası 250 mm çapında döner tabla Bölme diskli döner tabla Bölme kafası 140 mm mengene Dedpfxsyaai Rj Adtecd Farklı penslerle pens tutucu Soğutma suyu pompası

Durumu: yenilenmiş (kullanılmış), besleme uzunluğu X ekseni: 300 mm, y ekseni ilerleme uzunluğu: 160 mm, Z ekseni ilerleme mesafesi: 340 mm, Updated Machineseeker Description (with Axis Travel Details) Deckel FP1 aktiv – 3 Axes – Partially Refurbished – Immediately Operational Offered here is a Deckel FP1 aktiv in technically inspected, partially refurbished condition. The machine has been professionally serviced and is in a reliable, ready-to-operate state. It is ideally suited for workshops, toolmaking, training, as well as single-part and small-batch production. This is not an unchecked used machine, but a technically overhauled toolroom machine with a clearly defined scope of performance and a predictable delivery time. Technical Data & Features Axis Travel: X-axis approx. 300 mm Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Infinitely variable feed on all 3 axes Coolant system Brake motor Fixed angle table New LED work lamp New leveling feet Technical documentation in PDF format Scope of Refurbishment Workshop inspected and partially refurbished Technical check of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of existing settings Replacement of all lubricants Replacement of selected standard and various wear parts New paint finish in RAL 7035 / 7016 The deliberate choice for a partial refurbishment offers the best compromise between operational safety, value, and availability. A complete overhaul of the guideways was not carried out as it was not required from a technical perspective. Dsdox Tdy Ispfx Adtecd Scope of Delivery Machine loaded free of charge Delivery time approx. 12 weeks

Durumu: yenilenmiş (kullanılmış), Üretim yılı: 1990, Universal tool milling machine Dsdpfxjx S Edle Adtscd Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop tested Machine No.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric acceptance with test protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Without coolant system Can be retrofitted if required - Central lubrication, electric - Operating manual Used as seen, without warranty The machine corresponds technically to the standard at the time of manufacture.

Durumu: yenilenmiş (kullanılmış), Üretim yılı: 1982, Fonksiyonellik: tamamen fonksiyonel, X ekseni hareket mesafesi: 300 mm, Y ekseni hareket mesafesi: 300 mm, Z ekseni hareket mesafesi: 400 mm, maksimum mil hızı: 3.150 dev/dak, mil hızı (dk.): 31 dev/dak, giriş akımı türü: trifaze, dönüş hızı (maks.): 6.300 dev/dak, dönme hızı (dk.): 31 dev/dak, garanti süresi: 3 aylar, Donanım: dokümantasyon / kılavuz, We offer this refurbished DECKEL FP 2NC with TNC 320 tool milling machine, year of manufacture 1982. Manufacturer: DECKEL Model: FP 2NC with TNC 320 Year of manufacture: 1982 Condition: Completely refurbished Control: TNC 320 Dsdpsx Sv Rcsfx Adtecd Machine type: Tool milling machine If you have any questions or require further information, please feel free to send us a message or call us.