Handelsagentur Kossmann Hakoss

Durumu: iyi (kullanılmış), Üretim yılı: 2005, çalışma saatleri: 15.606 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 50 t, dolum açıklığı genişliği: 1.050 mm, dolum ağzı uzunluğu: 1.250 mm, balya uzunluğu: 1.200 mm, balya genişliği: 1.100 mm, balya yüksekliği: 700 mm, balyanın ağırlığı: 500 kg, güç: 30 kW (40,79 bg), hacim debisi: 160 m³/saat, Good day, We hereby offer you, without obligation, a used baler from the manufacturer Presto GmbH & Co. KG, type HPK 50 B. The following technical data have been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we cannot assume any liability. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Pressing force (main ram): 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions (with a bulk density of 60 kg/m³): approx. 6.7 t/h Machine weight (press): 12.5 t Note: The machine has been serviced in our workshop (the main control valve on the hydraulic block was replaced) and tested under operating conditions, both in manual and automatic mode. The machine documentation is available in German. Viewing of the baler is possible by appointment at our workshop. We would be pleased if this machine is of interest to you. Your Serviceteam Mertens & Frowein GmbH Bljdpfoyplwfjx Ag Sed

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 cm × 65 cm Condition: Very good! Fully inspected and tested. FLITS Rental & Sales service: Each machine is supplied with one bundle of binding wire (120 wires). Need more bundles of binding wire? Request a non-binding quote. At FLITS Rental & Sales, you benefit from speed, transparency, and reliability. We think along with you, respond immediately, and ensure you quickly have the right machine at your disposal. You are more than welcome to view the machines at our location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits by appointment only, so we can take the time to provide you with comprehensive information and show you the right machines. We are happy to assist you! Waste baler, Paper baler, Cardboard baler, Plastic baler, Waste compactor, Recycling, Textile baler, Waste, Waste processing Blodpfjypb Igex Ag Sed

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2008, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 386, presleme kuvveti: 50 t, dolum açıklığı genişliği: 1.110 mm, dolum ağzı uzunluğu: 1.050 mm, balya genişliği: 1.050 mm, balya yüksekliği: 730 mm, balyanın ağırlığı: 425 kg, toplam genişlik: 2.100 mm, toplam yükseklik: 3.100 mm, toplam uzunluk: 5.000 mm, toplam ağırlık: 6.800 kg, taşıma yüksekliği: 2.400 mm, güç: 22 kW (29,91 bg), Pres makine daha büyük bir modelle değiştirildi. Demontajına kadar normal şekilde kullanıldı. Tüm fonksiyonları eksiksiz olarak çalışıyordu. Pres makinesi, 09212 Limbach-Oberfrohna, Chemnitzer Str. 96 adresinde bulunmaktadır. Bjdpfxeypb Awe Ag Sold

Durumu: mükemmel (kullanılmış), Üretim yılı: 2017, çalışma saatleri: 13.000 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 48 t, balya uzunluğu: 1.200 mm, balya genişliği: 1.200 mm, balya yüksekliği: 750 mm, balyanın ağırlığı: 450 kg, Donanım: dokümantasyon / kılavuz, HSM VK 4812 P Year of manufacture: 2017 Fully automatic baler. The unit has been serviced and maintained by an authorized HSM Service Center with a branch in Germany. The baler is supplied complete with a ramp for ejecting finished bales and stands for binding wires. Bledpfx Agsyn Hk Rs Sjd Pressing force: 480 kN Motor power: 18 kW Voltage/Frequency: 400V/50Hz Throughput at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Overall length x width x height: 6661 x 3994 x 2583 mm Machine weight: 10.2 t Compacted material: Film, mixed paper, cardboard, punching waste Bale tying: quadruple with wire We also have other balers in stock. Transport costs depend on weight, volume, and especially distance. For inquiries, the following information is important: delivery address (postal code and city). For further details, please contact us by telephone, as phone contact is required to clarify transportation costs and other shipping methods. You will find our contact details in the seller's legal notice. We sell and export worldwide. Thanks to our large warehouse capacity, we can deliver even larger quantities flexibly and promptly. We issue intra-community invoices – without VAT. Opening hours Mon-Fri: 8:00-16:00 Sat: closed

Durumu: iyi (kullanılmış), Üretim yılı: 2013, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 390002114, presleme kuvveti: 12 t, Baler HSM V-Press 610 – Year of manufacture 2013 – 120 kN Pressing Force Sale exclusively B2B For sale is a fully operational vertical baler HSM V-Press 610 in well-maintained used condition. Ideal for retail, industry, logistics, or waste management companies to reduce the volume of cardboard and film. 🔧 Technical Specifications • Manufacturer: HSM • Model: V-Press 610 • Year of manufacture: 2013 • Pressing force: 120 kN Bodpfxjynwqze Ag Sold • Connection: 3~400 Volt / 50 Hz • Power: 3.0 kW • Rated current: 6.5 A • Machine number: 6110.134 • Serial number: 390002114 Features & Equipment • Electronic control with display • Automatic pressing cycle • Mechanical door lock with safety interlock • Bale binding with plastic strapping (spool holder included) • Emergency stop switch • Robust industrial design “Made in Germany” • GS certified 📦 Suitable for • Cardboard • Mixed paper • Film Efficient volume reduction for lower disposal costs. 📍 Condition • Used, fully functional • Normal signs of use (see photos) • Regularly serviced • Inspection stickers available Viewing possible by appointment. 💶 Terms of Sale • Sale only to commercial buyers • Sale excludes any warranty or guarantee • Collection by buyer • Loading on site can be arranged

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2010, Brand: HSM Model: V-Press 1160 plus Bedpfx Ageyngw Do Sold Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Loading aperture: 119.5 cm × 65 cm Condition: Very good! Functionality fully checked. FLITS Rental & Sales service: Every machine comes with one bundle of baling wire (120 wires). Need additional bundles of baling wire? Please request a free quote. Choosing FLITS Rental & Sales means speed, clarity, and reliability. We think along with you, respond immediately, and ensure you have the right machine as quickly as possible. You are most welcome to inspect the machines at our location: Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to inform you properly and show you the right machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile press Waste Waste processing

Durumu: kullanılmış, toplam genişlik: 1.300 mm, toplam yükseklik: 3.850 mm, toplam uzunluk: 2.200 mm, Fiyat: Talep üzerine - Üretim yılı: 8 - Dokümantasyon mevcut: Hayır - CE sertifikası mevcut: Hayır - Seri numarası: 307 - Taşıma ölçüleri: 2200 mm x 1300 mm x 3850 mm (u x g x y) Blodpfoym Uxtex Ag Sed - Taşıma paketleri [adet]: 1 Finansal bilgiler KDV: Belirtilen fiyat KDV hariçtir KDV/farklı vergilendirme: KDV, işletmeler için indirilebilir Endüstri alanındaki tüm ekipmanlar için teslimat ve takas her zaman mümkündür Yorick Diebels

Durumu: iyi (kullanılmış), Üretim yılı: 1999, çalışma saatleri: 50.702 h, Fonksiyonellik: tamamen fonksiyonel, Just arrived, more pictures and a video to follow Baler Paal Konti 325 D/SO, year of manufacture 1999 Technical Data: Manufacturer: Paal Model: Paal Konti 325 D/SO Year of manufacture: 1999 Operating hours: 50,702 Pressing force: 94 t Total power requirement: 128 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput: 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h Bodpfoym Sqyjx Ag Seld 100 kg/m³ approx. 38 t/h Bale weight: 525 to 800 kg Transport dimensions approx. 12352 x 2340 x 2800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Please note: All technical data are based on the manufacturer’s information. We accept no liability for the provided data or for possible errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections available by appointment. Sale is ex works, prepayment required, without warranty or guarantee.

Durumu: kullanılmış, Üretim yılı: 2000, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 54 t, giriş voltajı: 400 V, güç: 4 kW (5,44 bg), giriş frekansı: 50 Hz, Kullanılmış HSM 500.1 V1 balya presini sunuyoruz, üretim yılı 2000. Model: HSM 500.1 V1 Blsdpfsym Nmrjx Ag Sod Makine numarası: 6132.234.0 Seri numarası: 210183092 Çalışma basıncı: 54 ton Voltaj: 400 V Frekans: 50 Hz Motor gücü: 4 kW Nominal akım: A Üretim yılı: 2000 Herhangi bir sorunuz olursa veya daha fazla bilgiye ihtiyacınız varsa lütfen mesaj gönderin veya telefonla iletişime geçin.

Durumu: mükemmel (kullanılmış), Üretim yılı: 2018, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 70 t, HSM HL 7009 Re/Li horizontal balya presi. Makine çok iyi durumdadır ve yetkili bir servis merkezi tarafından düzenli olarak bakımı yapılmaktadır. Bu balya presi, perakende sektöründeki büyük çaplı atık yönetimi projeleri ile küçük ve orta ölçekli merkezi depolarda kullanım için tasarlanmıştır. HL 7009 modelinin balyaları 1100 x 1100 mm kesitine sahiptir ve 1200 mm balya uzunluğunda 600 kg ağırlığa ulaşabilir. Bu da kamyonun taşıma kapasitesinin en verimli şekilde kullanılmasını sağlar. Pres gücü: 700 kN Spesifik pres gücü: 58 N/cm² Tahrik gücü: 10,5 kW Gerilim / Frekans: 400 V / 50 Hz Bodpsymxicofx Ag Seld Teorik boşta çalışma kapasitesi: 42,97 m³/saat Besleme ağzı Genişlik x Uzunluk: 890 x 1020 mm Balya Genişlik x Yükseklik x Uzunluk: 1100 x 1100 x 1200 mm Toplam uzunluk x genişlik x yükseklik: 5366 x 2525 x 2559 mm Balya ağırlığı: 600 kg

Durumu: iyi (kullanılmış), Üretim yılı: 2011, çalışma saatleri: 40.000 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 88 t, dolum açıklığı genişliği: 990 mm, dolum ağzı uzunluğu: 1.800 mm, balya uzunluğu: 1.200 mm, balya genişliği: 1.100 mm, balya yüksekliği: 750 mm, toplam ağırlık: 23.000 kg, yağ tankı kapasitesi: 2.000 l, güç: 90 kW (122,37 bg), hacim debisi: 643 m³/saat, Good day, We hereby offer you, without obligation, a used baler including conveyor belt, wire tying stations, and bale slide from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical data has been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we do not assume any liability. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Bedpfx Agoymmtco Sold Operating hours: approx. 40,000 hours, as of July 2025 Main press force: 880 kN Specific pressing force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Press dimensions assembled: 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used at a recycling facility to compact paper, cardboard, and film. The baler is in good condition and will be replaced by a new, larger machine in May/June 2026. Until then, the machine can be inspected in operation with material feed. We would be pleased if this baler is of interest to you. Your service team, Mertens & Frowein GmbH

Durumu: iyi (kullanılmış), Üretim yılı: 2008, çalışma saatleri: 24.629 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 100 t, dolum açıklığı genişliği: 1.100 mm, dolum ağzı uzunluğu: 1.650 mm, balya uzunluğu: 1.200 mm, balya genişliği: 1.100 mm, balya yüksekliği: 1.100 mm, balyanın ağırlığı: 900 kg, toplam ağırlık: 24.000 kg, taşıma yüksekliği: 3.000 mm, yağ tankı kapasitesi: 2.000 l, güç: 90 kW (122,37 bg), hacim debisi: 1.350 m³/saat, taşıma genişliği: 2.400 mm, taşıma uzunluğu: 10.000 mm, Good day, We hereby offer you, subject to prior sale, a used baler from the manufacturer Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (status as of February 2026) Effective pump operating hours: 10,090 hours Main press force: 100 t Specific pressing force: 81 N/cm² Bledpoymmmpjfx Ag Sod Pre-press flap force: 50 t Feed hopper dimensions: 1,650 x 1,100 mm Filling volume per press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 2,000 L Transport weight (press only, after disassembly): approx. 25 t Note: The machine was used at a recycling plant for compacting paper, cardboard, and film materials. The baler is in good condition and will be replaced by a new, larger machine in July 2026. Until then, the machine can be inspected in operation with material being processed. We would be pleased if this baler is of interest to you. Your Service Team Mertens & Frowein GmbH

Durumu: iyi (kullanılmış), Üretim yılı: 2002, çalışma saatleri: 66.568 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 71 t, dolum açıklığı genişliği: 1.080 mm, dolum ağzı uzunluğu: 1.620 mm, balya uzunluğu: 1.200 mm, balya genişliği: 1.100 mm, balya yüksekliği: 720 mm, balyanın ağırlığı: 600 kg, toplam ağırlık: 26.000 kg, yağ tankı kapasitesi: 800 l, güç: 45 kW (61,18 bg), Good day, We are pleased to offer you, without obligation, a complete, used baling press line consisting of a BOA chain belt conveyor, type 1500 HS 29° KTH 3000 *13625 * 1500, a BOREMA PET bottle flattener type L 1600, and a BOA baling press, type 2040, equipped with wire tying stations and a bale slide. The following technical data was taken from the manufacturer’s manuals and brochures, for which we assume no liability as to their accuracy or completeness. Baling Press Manufacturer: BOA Type: 2040.S. 4V (6) 71.30 Year of Manufacture: 2002 Operating hours: approx. 66,568 hours, as of October 2025 Effective pump run time: 13,614 hours, as of October 2025 Number of bales pressed: 139,167 units, as of October 2025 Main press force: 71 t Specific pressing pressure: 9.0 kg/cm² Feed opening dimensions: 1,620 x 1,080 mm Bale dimensions: 1,100 x 720 mm, length variably adjustable from 800 to 1,600 mm Drive power: 45 kW Tying system: 4-fold vertical, fully automatic Press weight: approx. 26 t Note: The machine was used in a recycling plant for compacting paper, cardboard, film, and PET bottles. The press is in good condition and can be viewed under power, without material, by appointment. We would be pleased if this complete baler line is of interest to you. Your service team, Mertens & Frowein GmbH. Bodjymldtepfx Ag Ssld

Durumu: iyi (kullanılmış), Üretim yılı: 2012, Fonksiyonellik: tamamen fonksiyonel, Infeed Baling Press Presto HPK 50 HS, year of manufacture 2012, with perforator and inclined belt conveyor (sliding belt conveyor) Manufacturer: Presto Bledpfx Aeyma Rzog Ssd Model: HPK 50 HS Year of manufacture: 2012 Drive: 30 kW Pressing force: 50 t Filling opening: 1600 x 650 mm (L x W) Channel cross section: 700 x 950 mm Max. filling volume: 1.06 m³ Cycle time: 19 s Binding: 4-fold Throughput at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (L x W x H) Machine weight: approx. 10,500 kg Perforator, hydraulically adjustable Drive power 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Clear feed opening: 1380 x 1200 mm Materials: paper, cardboard, plastic film, PET bottles Please note: All technical data are based on information provided by the manufacturer. We do not assume any liability for the stated specifications or possible errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections can be arranged by appointment. Sale is ex-works, against advance payment, without warranty or guarantee.

Durumu: mükemmel (kullanılmış), Üretim yılı: 2014, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 60 t, balyanın ağırlığı: 430 kg, Donanım: dokümantasyon / kılavuz, Horizontal baler DIXI 60 SLD Year of manufacture: 2014 Press inspected by service technician / new hydraulic cylinder installed. Semi-automatic 60-ton press system for the efficient volume reduction of residual (recyclable) materials in industry and trade: Bedpfjyli U Tjx Ag Seld - Cardboard - Tetra Pak - Films - Foams - PET bottles - Insulation mats - and other compressible materials. Machine dimensions (L x H x W) approx. mm: 4150 (5080) x 1725 x 2035 Feed opening (W x H, standard) mm: 990 x 1110 Machine weight approx. kg: 5,420 Maximum press force: 60 t / 600 kN Pressing cycle (average value) approx. sec: 47 Bale size (W x H x L) approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370–410 Tying: manual Number of ties: 3, with wire Drive power: 7.5 kW; 400V/32A Freight costs depend on weight, volume, and above all the distance. For inquiries, the following information is required: delivery address (postal code and city/town). Further details require a phone call; therefore, we kindly ask you to contact us by telephone regarding shipping costs and further delivery conditions. Our contact details are listed under the Legal Information of the seller. Payment in cash is possible on site upon collection. We sell and export worldwide. Thanks to our very large storage capacity, we can deliver larger quantities flexibly and quickly. Please contact us before making a purchase. We issue intra-community invoices – excluding VAT. Opening hours: Mon–Fri: 8:00–16:00 Sat: closed

Durumu: mükemmel (kullanılmış), Üretim yılı: 2004, Fonksiyonellik: tamamen fonksiyonel, dolum açıklığı genişliği: 920 mm, dolum ağzı uzunluğu: 1.600 mm, Merhaba, tamamen çalışır durumda olan bir Paal Comdec kanal balya makinesini satıyorum. Makine düzenli olarak bakımı yapılmıştır ve çok iyi teknik durumdadır. Makine, bantlı konveyör ile birlikte satılmaktadır. 2025 yılında konveyör bandı değiştirildi. Bjdpfx Ajyk Uzpsg Sold

Durumu: mükemmel (kullanılmış), Üretim yılı: 2016, presleme kuvveti: 80 t, Donanım: dokümantasyon / kılavuz, DIXI 80 SLD yatay pres Sanayi ve ticarette atık malzemelerin (geri dönüşümlü) ekonomik hacim azaltımı için 80 ton basınçlı yarı otomatik presleme sistemi: Bjdpfsykyu Ujx Ag Sjld Karton Tetra Pak'lar Slaytlar Köpükler PET şişeler Yalıtım matları ve diğer sıkıştırılabilir malzemeler. Basınç kuvveti: 80 t Elektrik bağlantısı: 400 V 50 Hz; 11 kilovat; D-32 A (Seçenek: K-32 A) Döngü süresi – ortalama yaklaşık: 35 sn. Yaklaşık uzunluk: 4.320 mm (kaldırma cihazı ve palet olmadan) Genişlik yaklaşık: 1.830 mm Yükseklik yaklaşık: 1.830 mm : 2.620 mm (huni ile) Doldurma açıklığı (G x D) – gövde: 1.040 x 1.110 mm Balya boyutları: 1.120 x 1.120 x 1.200 mm Balya ağırlığı yaklaşık: 500–600 kg Bağlama: Hızlı açılan deliklere sahip 4 adet manuel tel Makine ağırlığı yaklaşık. 8.000 kg (balya hariç)

Durumu: mükemmel (kullanılmış), Üretim yılı: 2015, Marka: HSM Model: V-press 860 max Üretim yılı: 2015 Basma kuvveti: 418 kN Voltaj: 400 Maksimum balya ağırlığı: 430 kg (materyale bağlı olarak) Balya boyutları: 120 x 110 x 85 cm Makine ağırlığı: 2083 kg Makine boyutları: 180 cm x 125 cm x 298,5 cm Besleme ağzı boyutu: 120 cm x 65 cm Durum: çok iyi! Çalışır durumda kontrol edilmiştir. FLITS Rental & Sales hizmeti: Her makineyle birlikte bir paket bağ teli (120 tel) veriyoruz. Daha fazla bağ teli paketi mi ihtiyacınız var? Bizden ücretsiz fiyat teklifi isteyebilirsiniz. Bsdpsykpc Uofx Ag Sjld

Durumu: mükemmel (kullanılmış), Üretim yılı: 2015, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 40 t, balyanın ağırlığı: 350 kg, Donanım: dokümantasyon / kılavuz, HSM HL 4010 Re / Li Yatay Balya Presi. Sepet Devrilme Mekanizması ile donatılmıştır. Üretim yılı: 2015. Çok iyi durumda – yetkili servis merkezi tarafından düzenli olarak bakımları yapılmıştır. Kullanıma hazır. Tel, ip veya polipropilen bant ile balyalama için uygundur. Sanayi ve ticaret alanında kalıntıların (geri dönüşüm malzemeleri) ekonomik hacim azaltımı için 40 ton pres gücüne sahip yarı otomatik balya pres sistemi: Karton Tetrapak Folyo Köpük PET şişeler Yalıtım matları ve diğer sıkıştırılabilir malzemeler. Pres gücü: 400 kN Taşıma genişliği: 1,767 m Taşıma yüksekliği: 2,489 m Taşıma uzunluğu: 5,573 m Ağırlık: 4.500 kg Bledpjyi Sfvsfx Ag Sed Tahrik gücü: 7,5 kW Balya ağırlığı (malzemeye bağlı olarak): 300–350 kg Balya boyutları (uzunluk x genişlik x yükseklik): 750 x 1200 x 750 mm

Durumu: mükemmel (kullanılmış), Üretim yılı: 2016, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 30 t, Test edildi, temizlendi, tam bakım yapıldı. Tam donanımlı, kullanıma hazır! Blodpfx Aeyizpqeg Ssd

Durumu: kullanılmış, Üretim yılı: 2012, presleme kuvveti: 4 t, HSM V-Press 504 Baler – Used The HSM V-Press 504 vertical baler is a compact yet highly efficient machine designed for compressing cardboard and foil waste. Thanks to its robust construction, user-friendly operation, and modern control system, this model is an ideal solution for manufacturing companies, warehouses, retail outlets, and logistics centers where significant amounts of packaging waste are generated on a daily basis. Manufactured by the reputable German brand HSM, the baler guarantees reliable performance and extended service life. Key advantages of the waste baler: • Compression force of 40 kN – effective waste compaction, reducing volume by up to 95%. Bsdsyim Ayepfx Ag Seld • Efficiency and ergonomics – compaction process starts automatically when the door is closed, with the ram returning to the home position automatically. • Modern control system – microprocessor controls with membrane keypad and graphic text display for easy process monitoring. • Double doors with lever – safe and convenient operation, even with intensive use. • Compact bales up to 60 kg – easy to transport and store processed materials. • Integrated bale ejector – increases safety and operating comfort for the user. • Energy-efficient operation – 1.1 kW motor ensures full functionality with low energy consumption. • Stable, durable construction – ensures reliability over a long service life. Offer details: HSM V-Press 504 Waste Baler • Product code: MTP006524 • Condition: used • Year of manufacture: 2012 • Model: V-Press 504 • Width: 102 cm • Depth: 81.5 cm • Height: 193 cm • Weight: 290 kg • Power: 1100 W • Voltage: 230 V Net price: 2,859.00 EUR per piece * Large quantities in stock, price negotiable for bulk orders. * Delivery available throughout Europe. * Price does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Durumu: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 38 t, MPC 20 PE pres konteyneri Blodpfxeyiltqe Ag Sjd

Durumu: kullanılmış, Üretim yılı: 2014, presleme kuvveti: 40 t, Üretici: HSM Model: HL 4010 Li Üretim yılı: 2014 Basma kuvveti: 40 ton Bsdpfx Aoyibymeg Sold

Durumu: kullanılmış, Genel boyutlar: 2800x2570x2000 mm Bljdpfsyibhksx Ag Sjd

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2012, Brand: DIXI Model: 60 Sh Year of manufacture: 2012 Pressing force: 60 t Voltage: 400 V Maximum bale weight: 340–500 kg Bale dimensions: approx. 120 x 80 x 80–110 cm Machine weight: 2,400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Filling opening dimensions: 115 cm wide x 80 cm deep x 55 cm high Condition: Very good! Fully checked and tested. FLITS Rental & Sales service: Each machine comes with a bundle of binding wire (120 wires). Need more bundles? Request a free quote. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for both businesses and private customers. We focus on providing efficient solutions in internal transport, cleaning, waste processing, and working at heights. At FLITS Rental & Sales, you will find an extensive range of machines suitable for use in various industries. Check our listings for: waste compactors for efficient waste processing, electric pallet trucks/stackers for fast and safe internal transport, scrubber-dryers for thorough and professional floor cleaning, forklifts in various models suited for different work environments. At FLITS Rental & Sales, you choose speed, transparency, and reliability. We think along with you, respond immediately, and ensure you have the right machine quickly. Visit our location: You are very welcome to view the machines on site. Our address is: Schoterlandseweg 94, 8413NE Oudehorne, the Netherlands. Visits by appointment, so we can take the time to provide you with all the necessary information and show you the right machines. Contact Bjdpfx Agsyh Dqxe Ssld Do you have questions or would you like a non-binding quote? Please feel free to contact us: We are happy to assist you. Waste baler – Paper baler – Cardboard baler – Plastic baler – Waste compactor – Recycling baler – Textile baler – Waste – Waste treatment – DIXI